Quantitative analysis of the influence of fine aggregate's grading on mortar's rheology
Source abstract
Abstract
In this study, the influence of fine aggregate's grading on mortar's rheology is investigated. Firstly, the non-uniformity coefficient (Cu) and the coefficient of curvature (Cc) were employed to quantitatively evaluate the fine aggregate's grading. The results show that Cu provides a good quantitative description of the fine aggregate's grading and presents a good correlation with its packing density. Following that, the influence of the fine aggregate's grading on mortar's rheology was quantitatively analysed using the Cu parameter, and it was found that the higher the Cu value, the lower the relative yield stress (τr) and relative plastic viscosity (μr) of the corresponding mortar. In addition, the rate of variation of τr and μr with respect to Cu is very small after exceeding a critical value (4.85). This study suggests that, for a packing density higher than a critical value (0.7391), it may be more effective to improve the rheology of mortar by acting on aspects other than the fine aggregate's grading.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Innovations in Concrete and Construction Materials · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Properties of fresh and hardened concrete10.1016/j.cemconres.2011.03.009 ↗
2. Rheological properties of fresh concrete and its application on shotcrete10.1016/j.conbuildmat.2020.118180 ↗
3. Diphasic investigation of the visco-elastoplastic characteristics of highly flowable fine mortars
4. Effects of the addition of nanosilica on the rheology, hydration and development of the compressive strength of cement mortars10.1016/j.compositesb.2015.07.009 ↗
5. Influence of superplasticizers on rheological behaviour of fresh cement mortars10.1016/j.cemconres.2003.07.002 ↗
6. Water film thickness, flowability and rheology of cement-sand mortar10.1680/adcr.2008.22.1.3 ↗
7. Effect of temperature on the rheology of flowable mortars10.1016/j.cemconcomp.2009.10.003 ↗
8. Hu · 2005
9. Effects of size and uncompacted voids of aggregate on mortar flow ability10.3151/jact.5.75 ↗
10. Quantification of the water demand of sand in mortar10.1016/j.conbuildmat.2004.04.004 ↗
11. Effect of size and type of fine aggregates on flowability of mortar10.1007/s12205-012-1283-4 ↗
12. Influence of fine aggregate characteristics on the rheological properties of mortars10.1016/j.cemconcomp.2007.08.008 ↗
13. Effect of fine aggregate gradation on the rheology of mortar10.1016/j.conbuildmat.2022.127362 ↗
14. The yield stress of concentrated flocculated suspensions of size distributed particles10.1122/1.551029 ↗
15. Effect of aggregate size on the yield stress of mortar10.1016/j.conbuildmat.2021.124739 ↗
16. Effect of constituents on rheological properties of fresh concrete-A review10.1016/j.cemconcomp.2017.07.016 ↗
17. Smith · 2001 · 199
18. Review, classification, and extension of classical soil-structure interaction models based on different superstructures and soils10.1016/j.tws.2022.108936 ↗
19. Influence of sand gradation on compaction of loess soils
20. de · 1999
21. Packing density measurement and modelling of fine aggregate and mortar10.1016/j.cemconcomp.2009.03.006 ↗
22. A 3-parameter particle packing model incorporating the wedging effect10.1016/j.powtec.2013.01.043 ↗
23. China National Standards GB/T 14684-2011. Sand for construction. [Beijing, China].
24. Microtrac · 2020
25. Measuring the size of non-spherical particles and the implications for grain size analysis in volcanology10.1016/j.jvolgeores.2021.107257 ↗
26. Wet packing of crushed rock fine aggregate10.1617/s11527-008-9409-3 ↗
27. Combined effects of water film thickness and paste film thickness on rheology of mortar10.1617/s11527-012-9837-y ↗
28. 2014
29. Multi scale experimental study of concrete rheology: from water scale to gravel scale10.1617/s11527-005-9047-y ↗
30. Wallevik · 2000
31. Rheological methods for assessing the flow properties of mortar and related materials10.1016/0950-0618(94)90007-8 ↗
32. Effect of particle morphological parameters on sand grains packing properties and rheology of model mortars10.1016/j.cemconres.2015.11.002 ↗
33. Homogenization approach to the behavior of suspensions of noncolloidal particles in yield stress fluids10.1122/1.2838254 ↗
34. Underlying mechanisms of the influence of fine aggregates' content and properties on mortar's plastic viscosity
35. Experimental assessment of the effect of particle characteristics on rheological properties of model mortar10.1016/j.conbuildmat.2017.06.122 ↗