journal article·2024-05Open access

Effects of deoxidation methods on the inclusion characteristics and corrosion behaviour of high-strength low-alloy steels in marine environments

Zhihui Wang, Xian Zhang, Jingjing Peng, Lin Cheng, Jing Liu, Kaiming Wu

Abstract

The effects of deoxidation methods on the inclusion characteristics and corrosion behaviour of high-strength low-alloy steels were examined in marine environments using various microcharacterisation techniques and first-principles calculations. After Ca treatment, MnS-MgO-Al2O3 inclusions were modified to CaS-MgO-Al2O3 and microcrevices were existed at the interface between inclusions and Fe. After Zr-Ti-RE deoxidation, spherical CaS+TiN+ZrO2+MgAl2O4+(Ca, La) Al3O7 inclusions appeared. (Ca, La)Al3O7 in steel displayed similar mechanical properties to Fe, reducing the degree of lattice distortion and the formation of microcrevices around the inclusions. Micro-galvanic corrosion between Fe and MnS accelerated the localised corrosion rate and promoted the formation of large pits on the surface. However, the chemical activity of CaS resulted in dissolution of the inclusion, which relatively inhibited the localised corrosion propagation. The enrichment of Cr in the rust layer after Zr-Ti-RE deoxidation improved the compactness, contributed to a reduction in the localised corrosion rate and long-term corrosion rate. Finally, the underlying mechanism influencing corrosion behaviour was established.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Effects of alloying elements and microstructure on the susceptibility of the welded HSLA steel to hydrogen-induced cracking and sulfide stress cracking10.1016/j.msea.2008.11.064 ↗
2. High-strength, low-alloy steels10.1126/science.208.4446.862 ↗
3. Interrelationships between yield strength, low-temperature impact toughness, and microstructure in low-carbon, copper-precipitation-strengthened, high-strength low-alloy plate steels10.1016/j.msea.2017.11.022 ↗
4. Formation mechanism and control methods of acicular ferrite in HSLA steels: a review10.1016/j.jmst.2017.11.020 ↗
5. Local corrosion behaviors in the coarse-grained heat-affected zone in a newly developed Zr-Ti-Al-RE deoxidized high-strength low-alloy steel10.3390/ma16020876 ↗
6. Comparative study on the stress corrosion cracking of a new Ni-advanced high strength steel prepared by TMCP, direct quenching, and quenching & tempering10.1016/j.msea.2021.141854 ↗
7. Numerical approach for atmospheric corrosion monitoring based on EIS of a weathering steel10.1007/s40195-014-0193-5 ↗
8. Corrosion evolution and stress corrosion cracking of E690 steel for marine construction in artificial seawater under potentiostatic anodic polarization10.1016/j.conbuildmat.2019.117763 ↗
9. Role of inclusion and microstructure on corrosion initiation and propagation of weathering steels in marine environment10.1016/j.jmrt.2020.11.096 ↗
10. Effects of niobium and rare earth elements on microstructure and initial marine corrosion behavior of low-alloy steels10.1016/j.apsusc.2018.12.243 ↗
11. Pitting corrosion of 304 stainless steel in secondary water supply system10.1016/j.corcom.2021.11.010 ↗
12. Effect of chloride ion content on pitting corrosion of dispersion-strengthened-high-strength steel10.1016/j.corcom.2022.03.005 ↗
13. Corrosion behavior of X80 pipeline steel local defect pits under static liquid film10.1038/s41598-021-99973-8 ↗
14. Mechanism of MnS-mediated pit initiation and propagation in carbon steel in an anaerobic sulfidogenic media10.1016/j.corsci.2013.06.049 ↗
15. Inclusion control in high-performance steels10.1016/0924-0136(95)01974-J ↗
16. Oxide metallurgy technology in high strength steel: a review10.3390/ma15041350 ↗
17. Effects of modified inclusions and precipitates alloyed by rare earth element on corrosion and impact properties in low alloy steel10.1007/s40195-022-01404-8 ↗
18. Modification of MgO·Al2O3 spinel inclusions in Al-killed steel by Ca-treatment10.1007/s12613-011-0394-0 ↗
19. Effects of LaAlO3 and La2O2S inclusions on the initialization of localized corrosion of pipeline steels in NaCl solution10.1016/j.scriptamat.2019.10.025 ↗
20. Influence of inclusions on early corrosion development of ultra-low carbon bainitic steel in NaCl solution10.5006/1837 ↗
21. Formation mechanism of MnS inclusion during heat treatments and its influence on the pitting behavior of 316L stainless steel fabricated by laser powder bed fusion10.1016/j.corcom.2022.04.002 ↗
22. Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steels10.1016/j.corsci.2020.109150 ↗
23. Dissolution kinetics of the sulfide-oxide complex inclusion and resulting localized corrosion mechanism of X70 steel in deaerated acidic environment10.1016/j.corsci.2020.108815 ↗
24. Role of CaS inclusions in pitting initiation of carbon steel: triggering steel depassivation10.2355/isijinternational.ISIJINT-2021-567 ↗
25. Insight into the triggering effect of (Al, Mg, Ca, Mn)-oxy-sulfide inclusions on localized corrosion of weathering steel10.1016/j.jmst.2020.06.031 ↗
26. Influence of inclusions on initiation of pitting corrosion and stress corrosion cracking of X70 steel in near-neutral pH environment10.1016/j.corsci.2018.11.007 ↗
27. Effect of Zr-Ti combined deoxidation on the microstructure and mechanical properties of high-strength low-alloy steels10.1016/j.msea.2016.02.035 ↗
28. Effect of zirconium addition on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel10.1016/j.matchar.2006.11.028 ↗
29. In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation10.1007/s12540-016-5301-9 ↗
30. Effect of Zr-deoxidation on microstructure and mechanical behavior of microalloyed heavy plates with low impurity content10.1007/s42243-020-00525-7 ↗
31. Simulated coarse grain heat‐affected zone transformation behavior of newly developed Zr–Ti–RE deoxidized high‐strength low‐alloy steels with extremely high impact toughness10.1002/srin.202200343 ↗
32. In-situ characterization of initial marine corrosion induced by rare-earth elements modified inclusions in Zr-Ti deoxidized low-alloy steels10.1016/j.jmrt.2019.11.080 ↗
33. Initiation and propagation of localized corrosion induced by (Zr, Ti, Al)-Ox inclusions in low-alloy steels in marine environment10.1007/s42243-020-00492-z ↗
34. Effects of heat treatment on precipitation and corrosion resistance of cerium-containing super austenitic stainless steel S3125410.1016/j.corcom.2022.06.001 ↗
35. Effects of rare earth elements addition on mechanical properties and corrosion behavior of GCr15 bearing steel under different heat treatment conditions10.1016/j.corcom.2022.06.004 ↗
36. Influence of rare earth metals on mechanisms of localised corrosion induced by inclusions in Zr-Ti deoxidised low alloy steel10.1016/j.corsci.2020.108463 ↗
37. Effect of rare earth addition on corrosion sensitivity of GCr15 bearing steel in marine environment10.1016/j.matlet.2022.133693 ↗
38. Correlation between hyperfine structure of inclusion and localized corrosion mechanism of DSS2101 with Ce microalloying in simulated marine environment
39. Five-year atmospheric corrosion of Cu, Cr and Ni weathering steels in a wide range of environments10.1016/j.corsci.2018.06.039 ↗
40. Characterization of corrosion products formed on Ni 2.4 wt%–Cu 0.5 wt%–Cr 0.5 wt% weathering steel exposed in marine atmospheres10.1016/j.corsci.2014.07.011 ↗
41. Effect of pH value on the corrosion evolution of Q235B steel in simulated coastal-industrial atmospheres
42. Role of segregation behavior of Cu and Sb in the region of inclusions on initial corrosion10.1038/s41529-023-00354-5 ↗
43. Effect of Mn additions on the corrosion behaviour of TWIP Fe-Mn-Al-Si austenitic steel in chloride solution10.1016/j.corsci.2019.04.026 ↗
44. Integral effects of Ca and Sb on the corrosion resistance for the high strength low alloy steel in the tropical marine environment10.1016/j.corsci.2022.110708 ↗
45. Investigation of rare earth (RE) on improving the corrosion resistance of Zr-Ti deoxidized low alloy steel in the simulated tropic marine atmospheric environment10.1016/j.corsci.2023.111335 ↗
46. The effect of nonmetal inclusions and microstructure on local corrosion of carbon and low-alloyed steels10.1023/B:PROM.0000043062.19272.c5 ↗
47. Formation and modification of MgO·Al2O3-based inclusions in alloy steels10.1007/s11663-012-9663-1 ↗
48. The canonical work function-strain relationship of the platinum metal: a first-principles approach to metal-gate transistor optimization10.1063/1.4807939 ↗
49. First-principles modeling of anisotropic anodic dissolution of metals and alloys in corrosive environments10.1016/j.actamat.2017.03.027 ↗
50. First-principles study on pitting corrosion of Al deoxidation stainless steel with rare earth element (La) treatment
51. Low-oxygen rare earth steels10.1038/s41563-022-01352-9 ↗
52. Effect of adding cerium on microstructure and morphology of Ce-based inclusions formed in low-carbon steel10.1038/srep46503 ↗
53. Strain-induced preferential dissolution at the dislocation emergences in MnS: an atomic scale study10.1080/14786435.2015.1052030 ↗
54. In situ Raman spectroscopic analysis on carbon steel, immersed in aqueous solutions at different pH and anions10.1007/s11665-020-04805-x ↗
55. Corrosion resistance of low-alloy steel in concrete subjected to long-term chloride attack: characterization of surface conditions and rust layers10.1016/j.corsci.2022.110370 ↗
56. Improved corrosion resistance of a new 6% Cr steel in simulated concrete pore solution contaminated by chlorides10.1016/j.corsci.2020.108851 ↗
57. Study on the occurrence state of lanthanum in rust layer and mechanism of its influence on invasion state of corrosion atoms10.1002/srin.202200166 ↗
58. Corrosion behavior and mechanism of Cr–Mo alloyed steel: role of ferrite/bainite duplex microstructure10.1016/j.jallcom.2019.151787 ↗
59. Effect of alloy element on corrosion behavior of the huge crude oil storage tank steel in seawater10.1016/j.jallcom.2014.01.181 ↗
60. The Suppression of transformation of γ-FeOOH to α-FeOOH accelerating the steel corrosion in simulated industrial atmospheric environment with a DC electric field interference10.1080/1478422X.2019.1575553 ↗
61. Weathering steels: from empirical development to scientific design. A review10.1016/j.corsci.2014.03.006 ↗
62. Effects of rare earth elements on corrosion behaviors of low‐carbon steels and weathering steels10.1002/maco.201911150 ↗
63. Gutman · 1998
64. Theoretical Study of CaO, CaS and CaSe via First-Principles Calculations10.1016/j.rinp.2018.07.042 ↗
65. Structural, mechanical and thermodynamic properties of ZrO2 polymorphs by first-principles calculation10.1016/j.physb.2017.01.025 ↗
66. Experimental and DFT study on cerium inclusions in clean steels10.1016/j.jre.2020.07.021 ↗
67. First-principles study of structural stability, elastic and dynamical properties of MnS10.1016/j.commatsci.2014.07.022 ↗
68. Thermodynamics of chemical and electrochemical stability of corrosion active nonmetal inclusions10.1134/S0033173207010043 ↗
69. Pitting corrosion behavior in advanced high strength steels10.1016/j.jallcom.2014.08.243 ↗
70. New insights into the mechanism of localised corrosion induced by TiN-containing inclusions in high strength low alloy steel10.1016/j.jmst.2021.12.075 ↗
71. Mechanism of surface hole evolution and impact on corrosion resistance of high-strength low-alloy weathering steel10.1007/s11665-021-06368-x ↗
72. Evolution of rust layers on carbon steel and weathering steel in high humidity and heat marine atmospheric corrosion10.1016/j.jmst.2019.07.054 ↗
73. The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century10.1016/0010-938X(94)90158-9 ↗
74. Nano-scale chemical analysis of rust on a 2% Si-bearing low alloy steel exposed in a coastal environment10.1016/j.corsci.2008.05.022 ↗
75. Role of rare earth elements on the improvement of corrosion resistance of micro-alloyed steels in 3.5 wt.% NaCl solution10.1016/j.jmrt.2021.01.041 ↗