journal article·2002-11

Inhibition of the surface levelling of thermosetting polyester powder coatings caused by surface tension gradients

Y. Zhao, J. D. Carey, N. Knoops, D. Maetens, I. Hopkinson, J. N. Hay, J. L. Keddie

Journal of Materials Science· Volume 37· Issue 22
Publisher page

Abstract

Previous theoretical and experimental work has shown that surface tension gradients in liquid layers create surface defects and inhibit the levelling of an uneven surface. In coatings deposited from thermosetting polyester powders, which are studied here, small amounts of a low molecular-weight acrylate are incorporated to act as a “flow agent.” We find that this additive lowers the surface tension of the polymer melt and has a minor effect on the melt viscosity. A slower rate of levelling results from the decreased surface tension. We provide experimental evidence that lateral gradients in the surface tension of the polymer melt, resulting from the non-uniform distribution of the flow agent, inhibit the levelling of the surface. Specifically, the surface roughness of a powder coating is up to three times greater when a steep surface tension gradient is purposely created through powder blending. Surface tension gradients might also be responsible for the greater surface roughness (observed with atomic force microscopy on lateral length scales of 100 μm) that is found in coatings that contain flow agent.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rheology and Fluid Dynamics Studies · Fluid Dynamics and Thin Films · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. T. A. MISEV, in “Powder Coatings: Chemistry and Technology” (John Wiley and Sons, Chichester, 1991) p. 43.
2. S. G. YEATES, T. ANNABLE, B. J. DENTON, G. ELLIS, R. M. D. NASIR, D. PERITO and I. PARKER, J. Coatings Technol. 68(861) (1996) 107.
3. M. WULF, P. UHLMANN, S. MICHEL and K. GRUNDKE, Prog. Org. Coatings 38 (2000) 59.10.1016/S0300-9440(00)00082-5 ↗
4. P. G. DE LANGE, J. Coatings Technol. 56(717) (1984) 23.
5. L.O. KORNUM and H. K. RAASCHOU NIELSEN, Prog. Org. Coatings 8 (1980) 275.10.1016/0300-9440(80)80019-1 ↗
6. W. S. OVERDIEP, ibid. 14 (1986) 159.10.1016/0033-0655(86)80010-3 ↗
7. L. W. SCHWARTZ, D. E. WEIDNER and R. R. ELEY, Langmuir 11 (1995) 3690.10.1021/la00010a017 ↗
8. L. W. SCHWARTZ, R. A. CAIRNCROSS and D. E. WEIDNER, Phys. Fluids 8 (1996) 1693.10.1063/1.868952 ↗
9. P. L. EVANS, L. W. SCHWARTZ and R. V. ROY, J. Coll. Interf. Sci. 227 (2000) 191.10.1006/jcis.2000.6877 ↗
10. J. HAJAS and H. JUCKEL, in Proceedings of the 26th International Wateborne, High-Solids and Powder Coatings Symposium, edited by R. F. Storey and S. F. Thames (1999) p. 273.
11. B. E. MAXWELL, R. C. WILSON, H. A. TAYLOR, D. E. WILLIAMS, W. FARNHAM and J. TRIA, Prog.Org. Coatings 43 (2001) 158.10.1016/S0300-9440(01)00181-3 ↗
12. R. A. L. JONES and R. W. RICHARDS, in “Polymers at Surfaces and Interfaces” (Cambridge University Press, Cambridge, 1999) p. 21.10.1017/CBO9780511623196 ↗
13. S. WU, Polym. Eng. Sci. 27 (1987) 335.10.1002/pen.760270506 ↗
14. S. E. ORCHARD, Appl. Sci. Res. A 11 (1962) 451.10.1007/BF03184629 ↗
15. D. C. ANDREI, J. N. HAY, J. L. KEDDIE, R. P. SEAR and S. G. YEATES, J. Phys. D: Appl. Phys. 33 (2000) 1975.10.1088/0022-3727/33/16/307 ↗
16. L. GATE, W. WINDLE and M. HINE, Tappi J. 56 (1973) 61.
17. Z. HUANG, L. E. SCRIVEN, H. T. DAVIS and W. EKLUND, in “Abstracts of theWaterborne, Higher-Solids and Powder Coatings Symposium, ” 1997, p. 328.
18. J. C. KENNY, T. UENO and K. TSUTSUI, J. Coatings Technol. 68 (1996) 35.