journal article·2019-07

Grain growth mechanisms in ultrafine-grained steel: an electron backscatter diffraction and in situ TEM study

Laura Ahmels, Ankush Kashiwar, Torsten Scherer, Christian Kübel, Enrico Bruder

Journal of Materials Science· Volume 54· Issue 14
Publisher page

Abstract

In this work, the thermal stability of the strongly elongated and textured ultrafine-grained microstructure of a high-strength low-alloy steel processed by linear flow splitting is investigated. The annealing behavior is studied for α- and γ-fiber orientations, which are dominant in the rolling type texture of the material and are known for their differences in stored energy in conventionally cold rolled steels. Electron backscatter diffraction is used to assess contributions from curvature-driven boundary migration while the contribution of strain-induced migration is investigated by comparing the annealing behavior of prerecovered to non-prerecovered samples. The exact nature of the coarsening process is studied using in situ TEM heat treatments and complementary ACOM analysis. The results show that the observed preferred growth of α-fiber grains can be fully described by curvature-driven grain boundary migration and that there is no indication for the relevance of gradients in dislocation density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Jiang H, Zhu YT, Butt DP, Alexandrov IV, Lowe TC (2000) Microstructural evolution, microhardness and thermal stability of HPT-processed Cu. Mater Sci Eng A 290:128–13810.1016/S0921-5093(00)00919-9 ↗
2. Wang G, Wu SD, Zuo L, Esling C, Wang ZG, Li GY (2003) Microstructure, texture, grain boundaries in recrystallization regions in pure Cu ECAE samples. Mater Sci Eng A 346:83–9010.1016/S0921-5093(02)00521-X ↗
3. Čížek J, Janeček M, Srba O, Kužel R, Barnovská Z, Procházka I, Dobatkin S (2011) Evolution of defects in copper deformed by high-pressure torsion. Acta Mater 59:2322–232910.1016/j.actamat.2010.12.028 ↗
4. Hoppel H, Kautz M, Xu C, Murashkin M, Langdon T, Valiev R, Mughrabi H (2006) An overview: fatigue behaviour of ultrafine-grained metals and alloys. Int J Fatigue 28:1001–101010.1016/j.ijfatigue.2005.08.014 ↗
5. Sergueeva AV, Stolyarov VV, Valiev RZ, Mukherjee AK (2001) Advanced mechanical properties of pure titanium with ultrafine grained structure. Scripta Mater 45:747–75210.1016/S1359-6462(01)01089-2 ↗
6. Park K-T, Han SY, Shin DH, Lee Y-K, Lee KJ, Lee KS (2004) Effect of heat treatment on microstructures and tensile properties of ultrafine grained C-Mn steel containing 0.34 mass% V. ISIJ Int 44:1057–106210.2355/isijinternational.44.1057 ↗
7. Purcek G, Saray O, Karaman I, Maier HJ (2012) High strength and high ductility of ultrafine-grained, interstitial-free steel produced by ECAE and annealing. Metall Mater Trans A 43:1884–189410.1007/s11661-011-1063-7 ↗
8. Pippan R, Wetscher F, Hafok M, Vorhauer A, Sabirov I (2006) The limits of refinement by severe plastic deformation. Adv Eng Mater 8:1046–105610.1002/adem.200600133 ↗
9. Prangnell PB, Hayes JS, Bowen JR, Apps PJ, Bate PS (2004) Continuous recrystallisation of lamellar deformation structures produced by severe deformation. Acta Mater 52:3193–320610.1016/j.actamat.2004.03.019 ↗
10. Humphreys FJ (1997) A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—I. The basic model. Acta Mater 45:4231–424010.1016/S1359-6454(97)00070-0 ↗
11. Jazaeri H, Humphreys FJ (2004) The transition from discontinuous to continuous recrystallization in some aluminium alloys. Acta Mater 52:3251–326210.1016/j.actamat.2004.03.031 ↗
12. Hazra SS, Gazder AA, Pereloma EV (2009) Stored energy of a severely deformed interstitial free steel. Mater Sci Eng A 524:158–16710.1016/j.msea.2009.06.033 ↗
13. May J, Dinkel M, Amberger D, Höppel HW, Göken M (2007) Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys. Metall Mater Trans A 38:1941–194510.1007/s11661-007-9110-0 ↗
14. Zhao YH, Liao XZ, Jin Z, Valiev RZ, Zhu YT (2004) Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing. Acta Mater 52:4589–459910.1016/j.actamat.2004.06.017 ↗
15. Bruder E (2012) The effect of deformation texture on the thermal stability of UFG HSLA steel. J Mater Sci 47:7751–7758. https://doi.org/10.1007/s10853-012-6518-810.1007/s10853-012-6518-8 ↗
16. Samajdar I, Verlinden B, van Houtte P, Vanderschueren D (1997) γ-Fibre recrystallization texture in IF-steel: an investigation on the recrystallization mechanisms. Mater Sci Eng A 238:343–35010.1016/S0921-5093(97)00455-3 ↗
17. Zahid GH, Huang Y, Prangnell PB (2009) Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure. Acta Mater 57:3509–352110.1016/j.actamat.2009.04.010 ↗
18. Samajdar I, Doherty RD (1998) Cube recrystallization texture in warm deformed aluminum: understanding and prediction. Acta Mater 46:3145–315810.1016/S1359-6454(97)00492-8 ↗
19. Raabe D, Hantcherli L (2005) 2D cellular automaton simulation of the recrystallization texture of an IF sheet steel under consideration of Zener pinning. Comput Mater Sci 34:299–31310.1016/j.commatsci.2004.12.067 ↗
20. Hutchinson B, Hansen N, van Houtte P, Juul Jensen D (1999) Deformation microstructures and textures in steels [and discussion]. Philos Trans Math Phys Eng Sci 357:1471–148510.1098/rsta.1999.0385 ↗
21. Quadir MZ, Tse YY, Lam KT, Duggan BJ (2004) Rolling and recrystallization texture of cold rolled if steel: a study from low to high deformation. MSF 467–470:311–31610.4028/www.scientific.net/MSF.467-470.311 ↗
22. Gong P, Sun L, Wynne BP, Palmiere EJ, Rainforth WM (2018) The effect of thermomechanical controlled processing on recrystallisation and subsequent deformation-induced ferrite transformation textures in microalloyed steels. J Mater Sci 53:6922–6938. https://doi.org/10.1007/s10853-018-2029-610.1007/s10853-018-2029-6 ↗
23. Humphreys FJ, Prangnell PB, Bowen JR, Gholinia A, Harris C, Hutchinson B, Brown LM et al (1999) Developing stable fine-grained microstructures by large strain deformation. Philos Trans Math Phys Eng Sci 357:1663–168110.1098/rsta.1999.0395 ↗
24. Bohn T, Bruder E, Müller C (2008) Formation of ultrafine-grained microstructure in HSLA steel profiles by linear flow splitting. J Mater Sci 43:7307–7312. https://doi.org/10.1007/s10853-008-2682-210.1007/s10853-008-2682-2 ↗
25. Groche P, Vucic D, Jöckel M (2007) Basics of linear flow splitting. J Mater Process Technol 183:249–25510.1016/j.jmatprotec.2006.10.023 ↗
26. Rauch EF, Portillo J, Nicolopoulos S, Bultreys D, Rouvimov S, Moeck P (2010) Automated nanocrystal orientation and phase mapping in the transmission electron microscope on the basis of precession electron diffraction. Z Kristallogr 225:103–10910.1524/zkri.2010.1205 ↗
27. Bruder E, Bohn T, Müller C (2008) Properties of UFG HSLA steel profiles produced by linear flow splitting. Mater Sci Forum 584–586:661–66610.4028/www.scientific.net/MSF.584-586.661 ↗
28. Humphreys J, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd edn. Elsevier, Amsterdam
29. Lejcek P (2010) Grain boundary segregation in metals. Springer, Berlin10.1007/978-3-642-12505-8 ↗
30. Borbély A, Driver JH, Ungár T (2000) An X-ray method for the determination of stored energies in texture components of deformed metals; application to cold worked ultra high purity iron. Acta Mater 48:2005–201610.1016/S1359-6454(99)00457-7 ↗
31. Rajmohan N, Hayakawa Y, Szpunar JA, Root JH (1997) Neutron diffraction method for stored energy measurement in interstitial free steel. Acta Mater 45:2485–249410.1016/S1359-6454(96)00371-0 ↗
32. Rowenhorst DJ, Lewis AC, Spanos G (2010) Three-dimensional analysis of grain topology and interface curvature in a β-titanium alloy. Acta Mater 58:5511–551910.1016/j.actamat.2010.06.030 ↗
33. Wang H, Liu GQ, Song XY, Luan JH (2011) Topology-dependent description of grain growth. EPL 96:3800310.1209/0295-5075/96/38003 ↗
34. Yu TB, Hansen N, Huang XX (2013) Triple junction motion—a new recovery mechanism in metals deformed to large strains. MSF 753:485–48810.4028/www.scientific.net/MSF.753.485 ↗
35. Mullins WW (1956) Two-dimensional motion of idealized grain boundaries. J Appl Phys 27:900–90410.1063/1.1722511 ↗
36. Pelleg J (1966) On the relation between diffusion coefficients and grain boundary energy. Phil Mag 14:595–60110.1080/14786436608211954 ↗
37. Jensen DJ (1997) Orientation aspects of growth during recrystallization. Zugl.: Lyngby-Tårbaek, Technical University, Diss., 1997, Risø National Laboratory, Roskilde
38. Juul Jensen D (1995) Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matrix during recrystallization. Acta Metall Mater 43:4117–412910.1016/0956-7151(95)00111-8 ↗
39. Engler O (1998) On the influence of orientation pinning on growth selection of recrystallisation. Acta Mater 46:1555–156810.1016/S1359-6454(97)00354-6 ↗