journal article·2006-11-27

Fluorescence spectroscopy analysis of Al–Al2O3 composites with coarse interpenetrating networks

Robert J. Moon, Mark Hoffman, Shigemi Tochino, Chang Joo Lee, Giuseppe Pezzotti

Journal of Materials Science· Volume 41· Issue 22
Publisher page

Abstract

Fluorescence microprobe spectroscopy was used to characterize the stress fields that develop within an interpenetrating Al–Al2O3 composite resulting from both the thermal expansion mismatch during sample processing, and from an external applied load. The 30 vol% Al–70 vol% Al2O3 composite that was investigated had an aluminum and alumina phase feature size of 50–100 μm. The residual thermal compressive stress measured in the alumina was ∼40–340 MPa. The effect of varying the metal ligament size on the residual stress distribution is discussed. Additionally, the application of an external load caused a non-uniform stress distribution to develop within the alumina regions around the crack-tip, which was attributed to microstructure inhomogeneities. The crack was further extended and the influence of the stress distribution within the alumina regions on the crack extension direction is briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Venkateswara Rao KT, Soboyelo WO, Ritchie RO (1992) Metall Trans A 23A:2249
2. Badrinarayanan K, McKelvey AL, Venkateswara Rao KT, Ritchie RO (1996) Metall Trans A 27A:378110.1007/BF02595627 ↗
3. Bloyer DR, Venkateswara Rao KT, Ritchie RO (1998) Metall Trans A 29A:248310.1007/s11661-998-0220-0 ↗
4. Prielipp H, Knechtel M, Claussen N, Streiffer S, Müllejans H, Rühle M, Rödel J (1995) Mater Sci Engng 197A:1910.1016/0921-5093(94)09771-2 ↗
5. Neubrand A, Chung T-J, Rödel J, Steffler ED, Fett T (2002) J Mater Res 17(11):291210.1557/JMR.2002.0422 ↗
6. Moon RJ, Tilbrook M, Hoffman M, Neubrand A (2005) J Am Ceramic Soc 88(3):66610.1111/j.1551-2916.2005.00115.x ↗
7. Hoffman M, Skirl S, Pompe W, Rödel J (1999) Acta Mater 47:56510.1016/S1359-6454(98)00367-X ↗
8. Hoffman M, Fiedler B, Emmel T, Prielipp H, Claussen N, Gross D, Rödel J (1997) Acta mater 45:360910.1016/S1359-6454(97)00057-8 ↗
9. Skirl S, Hoffman M, Bowman K, Wiederhorn S, Rödel J (1998) Acta Mater 46:249310.1016/S1359-6454(98)80033-5 ↗
10. Hoffman M, Rödel J, Skirl S, Zimmermann A, Fuller E, Mullejans H (1999) Key Eng Mater 159–160:311
11. Ashby MF, Blunt FJ, Bannister M (1989) Acta Metall 37:184710.1016/0001-6160(89)90069-2 ↗
12. Pezzotti G, Muller WH (2002) Continuum Mech Thermodyn 14:11310.1007/s001610100076 ↗
13. Wang C, Libardi W, Baldo JB (1998) Int J Fracture 94:17710.1023/A:1007591216796 ↗
14. Kassam ZHA, Zhang RJ, Wang Z (1995) Mat Sci Eng A203:28610.1016/0921-5093(95)09828-3 ↗
15. Li Z, Chen Q (2003) Eng Frac Mech 70:58110.1016/S0013-7944(02)00082-6 ↗
16. Butcher RJ, Rousseau CE, Tippur HV (1999) Acta Mater 47(1):25910.1016/S1359-6454(98)00305-X ↗
17. Kubler J (1997) Ceram Eng Sci Proc 18:15510.1002/9780470294444.ch18 ↗
18. Pezzotti G, Sbaizero O (2001) Mat Sci Eng A303:26710.1016/S0921-5093(00)01844-X ↗
19. He J, Clarke DR (1995) J Am Ceram Soc 78:134710.1111/j.1151-2916.1995.tb08493.x ↗
20. Ma Q, Clarke DR (1993) J Am Ceram Soc 76:143310.1111/j.1151-2916.1993.tb03922.x ↗
21. Tilbrook M, Moon R, Hoffman M (2005) Mat Sci Eng A393:17010.1016/j.msea.2004.10.004 ↗
22. ASTM Standard E 1820-96 (1997) Standard test method for measurement of fracture toughness. ASTM, Philadelphia, Pa
23. Agrawal P, Conlon K, Bowman KJ, Sun CT, Chichocki FR Jr, Trumble KP (2003) Acta Mater 51:114310.1016/S1359-6454(02)00519-0 ↗