Analysis of oxide layer by simulating NiFe2O4 film on stainless steel, Incoloy-600 and carbon steel
Source abstract
Abstract
Radiation fields occur in nuclear power plant primary circuits, and decontamination is needed before the permanent shutdown of a reactor. Radiation field reduction in the primary coolant system of water-cooled reactors can be achieved by using a decontamination solution. As part of this, the corrosion behavior and characterization of oxide layers formed on different kinds of metal should be examined. In this study, NiFe2O4 thin film was deposited on substrates of stainless steel, inconel and carbon steel via electron beam evaporation. The reaction between nickel ferrite and different metal ions results in varying compositions of oxide layers. The phase, structure and morphology of materials were confirmed by SEM, XRD and XPS analysis, and the magnetic properties of each deposited sample were observed by using vibrating sample magnetometer (VSM). The characteristics of the surface-coated metals are the main focus of this work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Iron oxide chemistry and applications · Electron and X-Ray Spectroscopy Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Choi W-K et al (2015) Development of advanced decontamination technology for nuclear facilities KAERI/RR-3964/2014. Korea Atomic Energy Research Institute, Daejeon
2. IAEA (2007) Terminology used in nuclear safety and radiation protection. IAEA Safety Glossary, Vienna
3. Gurau D, Deju R et al (2014) Radioactive decontamination technique used in decommissioning of nuclear facilities. Romanian J Phys 59(9–10):012–919
4. Behnamian Y, Mostafaei A, Kohandehgban A, Amirkhiz BS, Serate D, Sun Y, Liu S, Aghaie E, Zeng Y, Chemielus M, Xheng W, Guzonas D, Chen W, Luo J-L (2016) A comparative study on corrosion behavior of stainless steel and nickel-based superalloy in ultra-high temperature supercritical water at 800°C. Corros Sci 106:188–20710.1016/j.corsci.2016.02.004 ↗
5. Olmedo AM et al (2012) Characterization of the oxide film grown at 260°C in a simulated secondary coolant of a nuclear reactor. Elsevier, Amsterdam, pp 2211–8128. https://doi.org/10.1016/j.mspro.2012.06.07110.1016/j.mspro.2012.06.071 ↗
6. Odar S (2015) CRUD in PWR/VVER coolant, volume-II-control of CRUD in the PWR/VVER coolant and mitigation tools. ANT International, Mölnlycke
7. Choi M et al (2017) The high capacity and cycle stability of NiFe2O4 thin film prepared by E-beam evaporation method for lithium ion batteries. J Alloys Compd 729:802–80810.1016/j.jallcom.2017.06.334 ↗
8. Priyadharsini P, Pradeep A, Sambasiva Rao P, Chandrasekaran G (2009) Structural, spectroscopic and magnetic study of nanocrystalline Ni–Zn ferrites. Mater Chem Phys 116:207–21310.1016/j.matchemphys.2009.03.011 ↗
9. Karakas ZK et al (2015) The effects of heat treatment on the synthesis of nickel ferrite nanoparticles using the microwave assisted combustion method. J Magn Magn Mater 374:298–30610.1016/j.jmmm.2014.08.045 ↗
10. Velmurugan S, Padma S et al (1996) The passivation effects of magnesium ion on PHWR primary heat transfer system structural materials. J Nucl Sci Technol 33(8):641–649. https://doi.org/10.1080/18811248.1996.973197110.1080/18811248.1996.9731971 ↗
11. Lasheras X et al (2016) Chemical synthesis and magnetic properties of monodisperse nickel ferrite nanoparticles for biomedical applications. J Phys Chem C 120:3492–350010.1021/acs.jpcc.5b10216 ↗
12. Koster G, Huijiben M, Rinders G (2015) Epitial growth of complex metal oxides. Elsevier, Woodhead Publications
13. Srinivasan G, Priya S, Sun NX (2015) Composite magnetoelectrics: materials, structures, and applications. Elsevier. https://doi.org/10.1016/C2013-0-16508-710.1016/C2013-0-16508-7 ↗