Thermally stimulated depolarization currents in γ-irradiated β-spodumene solid solution ceramic
Source abstract
Abstract
Thermally stimulated depolarization currents (TSDC) in unirradiated and γ-irradiated press prepared β-spodumene solid solution ceramic have been investigated within the wide temperature range 20–160°C. Doses in the range 10–105 Gy were used. The TSDC spectrum at relatively high polarizing fields shows two relaxation peaks whose positions and intensities depend on the polarization conditions and γ-doses. Discussion of data is given on the basis that dipolar and space-charge polarization coexist in the used ceramic material. Activation energies for space-charge peak are determined from the initial rise of thermal current peak under different γ-doses. Aging effect clearify that the longer the aging time, the smaller the polarization. Pyroelectric current data provide further support to space charge effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. L. L. Hench and J. K. West, “Principles of Electronics Ceramics” (Wiley-Interscience, New York, 1990).
2. A. J. Moulson and J. H. Herbert, “Electroceramics” (Chapman Hall, London, 1990).
3. J. C. Burfoot and G. W. Taylor, “Polar Dielectric and Their Applications” (MacMillan, London, 1979) p. 76.10.1525/9780520315334 ↗
4. M. E. Lines and M. Glass, “Principles and Applications of Ferroelectric and Related Materials” (Clarendon Press, Oxford, 1977) ch. 4.
5. T. F. Mano, N. T. Correia, J. J. Moura Ramos and B. Saramago, J. Mater. Sci. 30 (1995) 2035.10.1007/BF00353030 ↗
6. M. S. C. Dionisio, N. T. Correia, J. F. Mano, J. J. Moura ramos, A. C. Fernandes and B. Saramago, ibid. 30 (1995) 4394.10.1007/BF00361523 ↗
7. W. K. Sakamoto, S. Kageswa, D. H. Kanda and D. K. Das-Gupta, ibid. 33 (1998) 3325.10.1023/A:1013233329595 ↗
8. P. Colomer, S. Montserrat and J. Belana, ibid. 33 (1998) 1921.10.1023/A:1004321825379 ↗
9. H. Fan, L. Zhang and X. Yao, ibid. 33 (1998) 895.10.1023/A:1004343324103 ↗
10. S. N. Prasad and R. S. Prased, Indian J. Phys. 49 (1975) 596.
11. S. H. Carr, “Electric Properties of Polymers,” edited by D.A. Seanor (Academic Press, New York,1992).
12. C. B. Brackbill, H. A. Mckinstry and F. A. Hummel, J. Amer. Ceram. Soc. 34 (1951) 107.10.1111/j.1151-2916.1951.tb11616.x ↗
13. R. Sharma, L. V. Sud and P. K. C. Pillai, J. Polymer 21 (1980) 925.10.1016/0032-3861(80)90249-9 ↗
14. P. BraÜnlich, “Topics in Applied Physics, Thermally Relaxation in Solids” (Springer-Verlag Berlin, Heidelberg, New York) Vol. 37 (1979).
15. P. K. C. Pillai, G. K. Narula, A. K. Tripathi and R. G. Mendiratta, Phys. Rev. B 27 (1982) 2508.10.1103/PhysRevB.27.2508 ↗
16. G. M. Sessler, “Electrets” (Springer-Verlag, Berlin, 1980).10.1007/978-3-540-34846-7 ↗
17. A. F. Basha, Indian J. Phys. 60A (1986) 416.
18. E. J. Homyak, Thesis, University of Michigan, 1969.
19. W. I. Abdel-Fattah, M. S. Abo Ellil, R. A. Abdellah, M. Abou taleb and F. H. Abd elkader, Egypt J. Sol. 14(2) (1996) 369.
20. R. Bohmer, G. Gerhard, F. Drexler, A. Loid, K. L. Ngai and W. Pannhorst, J. Non-Crystalline Solids 155 (1993) 189.10.1016/0022-3093(93)91325-W ↗
21. M. A. Fadel, W. I. Abdel-Fattah, M. B. El-Kholi and R. A. Abdellah, Science of Ceramics 14 (1989) 333.
22. P. K. C. Pillai, P. K. Gupta and M. Goel, J. Polym. Sci., Polym. Phys. Ed. 19 (1981) 1461.10.1002/pol.1981.180190917 ↗
23. G. Yianakopoulos, J. Vanderschueren, J. Niezette and A. Thielen, IEEE Trans. Electr. Insul. 25(4) (1990) 693.10.1109/14.57092 ↗
24. L. C. E. Struik, “Physical Aging in Amorphous Polymers and Other Materials” (Elsevier, Amsterdam, 1978).
25. M. D. Migahed, A. Shaban, A. El-Khodary, M. Hammam, M. El-Tonsy and H. Hafiz, J. Polym. Mater. 7 (1990) 131.
26. W. W. Parkinson, “Encycl. Polym. Sci. Tech.,”edited by N. M. Bikals, H. F. Mark, and N. G. Gaylord, (John Wiley and Sons Inc., New York, 1969) ch.11.
27. J. W. Gruner, Am. Min. 33(11/12) (1948) 679.
28. N. J. Kreidl, “Ceramic in Severe Environments,” 3rd ed, (Plenum Press, New York, 1971) ch. 5.
29. M. M. Perlman, J. Appl. Phys. 42 (1971) 2645.10.1063/1.1660602 ↗
30. C. Bucci and R. Fieschi, Phys. Rev. Lett. 12 (1964) 16.10.1103/PhysRevLett.12.16 ↗
31. R. Muccillo and J. Rolfe, Phys. Status Solidi B61 (1974) 579.10.1002/pssb.2220610223 ↗
32. G. Pfister and M. A. Abkowitz, J. Appl. Phys. 45 (1974) 1001.10.1063/1.1663361 ↗
33. M. G. Broadhurst, G. T. Dairs, J. E. Mckinney and R. E. Collins, ibid. 49 (1978) 1992.10.1063/1.324445 ↗
34. M. Abkowitz, W. M. Prest, JR., D. J. Luca and G. Pfister, Appl. Phys. Lett. 34 (1979) 19.10.1063/1.90582 ↗
35. A. K. Sharma and Ch. Ramu, Materials Letters 10 (1991) 517.10.1016/0167-577X(91)90219-V ↗
36. A. S. Ibrahim, G. Attia, M. S. Abo Ellil and F. H. Abd El-Kader, J. Appl. Polym. Sci. 63 (1997) 343.10.1002/(SICI)1097-4628(19970118)63:3<343::AID-APP9>3.0.CO;2-N ↗
37. Y. Woda and R. Kayakawa, Jpn. J. Appl. Phys. 15 (1970) 2041.10.1143/JJAP.15.2041 ↗