journal article·2000-04

Preliminary data on compatibility between thick film perovskite electrodes and PLZT films

M. Hrovat, S. Bernik, J. Holc, T. Padežnik, M. Kosec

Journal of Materials Science· Volume 35· Issue 7
Publisher page

Abstract

The possible use of electrically conductive perovskites SrRuO3, La(Ni0.6Co0.4)O3 and (La0.5Ca0.5)FeO3 as electrodes for PLZT ((Pb,La)(Ti,Zr)O3 solid solutions) thick films was evaluated. As the ceramic electrode is placed between an alumina substrate and a PLZT thick film layer possible interactions between Al2O3 on one side and PLZT on the other and the chosen perovkites were studied. Both SrRuO3 and LaNi0.6Co0.4O3 reacted at 1000°C with Al2O3 forming SrAl2O4 and RuO2 in the first case and LaAlO3 and La2NiO4 in the second case. At higher firing temperatures reactions between La0.5Ca0.5FeO3 and Al2O3 resulted in small quantities of an unknown phase or phases. The results of reactions of all three perovskites with PLZT were perovskite solid solutions incorporating ions from the conducting perovskites into the PLZT structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Ferroelectric and Piezoelectric Materials · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. B. Morten, G. De Cicco and M. Prudenziati, in Proc. 7th European Hybrid Microelectronics Conf. ISHM-Europe 89, Hamburg, May 1989, p. 8.4.
2. S. Leppavuori, A. H. Lozinski and A. Uusimaki, in "Sensors and Actuators, A 46-47, Vol. 2," edited by. G. Blasquez, P. Pons (1995) p. 391. Proc. Eurosensors VIII Conf., Toulose, September 1994.10.1016/0924-4247(94)00927-A ↗
3. V. Ferrari, D. Marioli, A. Taroni, E. Rannuci, P. Ferruti, in Proc. 10th European Microelectronics Conf. ISHMEurope 95, Copenhagen, May 1995, p. 362.
4. M. Prudenziati, B. Morten and G. De Cicco, Microelectronics Int. 38 (1995) 5.10.1108/eb044577 ↗
5. J. F. Fernandez, E. Nieto, C. Mourne, P. Duran and R. E. Newnham, J. Mater. Sci. 30 (1995) 5399.10.1007/BF00351550 ↗
6. Q. X. Jia, X. D. Wu, S. R. Foltyn, P. Tiwari, Appl. Phys. Lett. 66 (17) (1995) 2197.10.1063/1.113945 ↗
7. M. S. Chen, T. B. Wu, J. M. Wu, ibid. 68 (10) (1996) 1430.10.1063/1.116103 ↗
8. S. Aggarwal, A. M. Dhote, R. Ramesh, W. L. Waren, G. E. Pike, D. Dimos, M. V. Raymond, B. A. Tuttle and J. T. Evans, ibid. 69 (17) (1996) 2540.10.1063/1.117732 ↗
9. K. Aoki, I. Murayama, Y. Fukuda and A. Nishimura, Jpn. J. Appl. Phys. 36 (6A) (1997) L690.10.1143/JJAP.36.L690 ↗
10. Q. Vang, D. Gilmer, Y. Fan, A. Franciosi, D. F. Evans, W. L. Gladfelter and X. F. Zhang, J. Mater. Res. 12 (4) (1997) 984.10.1557/JMR.1997.0139 ↗
11. C. R. Cho, D. A. Payne and S. L. Cho, Appl. Phys. Lett. 71 (20) (1997) 3013.10.1063/1.120247 ↗
12. M. Izuha, K. Abe and N. Fukushima, Jpn. J. Appl. Phys. 36 (9B) (1997) 5866.10.1143/JJAP.36.5866 ↗
13. R. J. Bouchard and J. L. Gillson, Mater. Res. Bull. 7 (1972) 873.10.1016/0025-5408(72)90075-X ↗
14. K. Watanabe, M. Ami and M. Tanaka, ibid. 32 (1) (1997) 83.10.1016/S0025-5408(96)00165-1 ↗
15. D. KuŠČer, M. Hrovat, J. Holc, S. Bernik and D. Kolar, J. Power Sources 1-2 (1996) 161.10.1016/S0378-7753(96)02364-6 ↗
16. K. Gaur, S. C. Verma and H. B. Lal, J. Mater. Sci. 23 (1988) 1725.10.1007/BF01115712 ↗
17. J. Drennan, C. P. Tavares and B. C. H. Steele, Mater. Res. Bull. 17(5) (1982) 621.10.1016/0025-5408(82)90044-7 ↗
18. K. P. Rajeev and A. K. Raychaudhuri, Phys. Rev. B 46 (1992) 1309.10.1103/PhysRevB.46.1309 ↗
19. M. Hrovat, N. Katsarakis, K. Reichmann, S. Bernik, D. KuŠČer and J. Holc, Solid State Ionics 83 (1996) 99.10.1016/0167-2738(95)00224-3 ↗
20. Standard MIL-C-675-C.