journal article·2023-12

Microstructure, texture, and mechanical properties of Mg–4Zn–1Mn–xCa alloys and the fabrication of biomedical Mg thin-walled micro-tubes

Zhipeng Ge, Lifei Wang, Jianzhong He, Hongxia Wang, Jia She, Xiaoye Zhou, Liuwei Zheng, Kwang Seon Shin

Journal of Materials Science· Volume 58· Issue 47
Publisher page

Abstract

In this study, the microstructure, texture, and mechanical properties of Mg–4Zn–1Mn–xCa (x = 0, 0.2, 0.5, wt%) alloys are studied. The thin-walled micro-tubes of Mg–4Zn–1Mn–xCa (x = 0, 0.2, wt%) alloy are fabricated by hot extrusion, and the microstructure and corrosion behaviors of micro-tubes are investigated. The results show that the addition of trace Ca caused the microstructure of Mg–4Zn–1Mn–xCa alloys to become finer, while resulting in a significant basal texture owing to the increased volume fraction of unrecrystallized grains. Notably, the addition of 0.2Ca enhanced the yield strength (YS) by 30.3%. Then, Mg alloy micro-tubes with an outer diameter of 3.2 mm, inner diameter of 2.4 mm, and a wall thickness of 0.4 mm are successfully produced. Besides, the hardness of micro-tubes with 0.2Ca addition (72.3Hv) is higher significantly than that without Ca addition (62.9Hv), and the grain size is much finer. An electrochemical test demonstrated that the corrosion resistance of micro-tubes shows an improvement with the addition of 0.2Ca. These findings indicated that it is feasible to fabricate a biodegradable Mg stent with grain superfine Mg–4Zn–1Mn–0.2Ca alloy billet.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Tsakiris V, Tardei C, Clicinschi FM (2021) Biodegradable Mg alloys for orthopedic implants–a review. J Magnes Alloys 9:1884–190510.1016/j.jma.2021.06.024 ↗
2. Li J, Chen L, Zhang X, Guan X (2020) Enhancing biocompatibility and corrosion resistance of biodegradable Mg-Zn-Y-Nd alloy by preparing PDA/HA coating for potential application of cardiovascular biomaterials. Mater Sci Eng C 109:11060710.1016/j.msec.2019.110607 ↗
3. Xu Y, Li J, Qi M, Guo W, Deng Y (2022) A newly developed Mg-Zn-Gd-Mn-Sr alloy for degradable implant applications: Influence of extrusion temperature on microstructure, mechanical properties and in vitro corrosion behavior. Mater Character 188:11186710.1016/j.matchar.2022.111867 ↗
4. Zhang S, Zhang X, Zhao C et al (2010) Research on an Mg–Zn alloy as a degradable biomaterial. Acta Biomater 6:626–64010.1016/j.actbio.2009.06.028 ↗
5. Zhang E, Yin D, Xu L, Yang L, Yang K (2009) Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application. Mater Sci Eng C 29:987–99310.1016/j.msec.2008.08.024 ↗
6. Zhang E, Yang L (2008) Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application. Mater Sci Eng A 497:111–11810.1016/j.msea.2008.06.019 ↗
7. Jin G, Cao H, Qiao Y, Meng F, Zhu H, Liu X (2014) Osteogenic activity and antibacterial effect of zinc ion implanted titanium. Colloids Surf B Biointerfaces 117:158–16510.1016/j.colsurfb.2014.02.025 ↗
8. Cai S, Lei T, Li N, Feng F (2012) Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys. Mater Sci Eng C 32:2570–257710.1016/j.msec.2012.07.042 ↗
9. Zhang S, Li J, Song Y et al (2009) In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg–Zn alloy. Mater Sci Eng C 29:1907–191210.1016/j.msec.2009.03.001 ↗
10. Bakhsheshi-Rad HR, Idris MH, Abdul-Kadir MR, Ourdjini A, Medraj M, Daroonparvar M, Hamzah E (2014) Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys. Mater Des 53:283–29210.1016/j.matdes.2013.06.055 ↗
11. Jun Z, Jiang B, Yan S et al (2022) Simultaneous improvement of strength and ductility by Mn addition in extruded Mg–Gd–Zn alloy. Trans Nonferrous Metal Soc 32:1460–147110.1016/S1003-6326(22)65886-2 ↗
12. Khan SA, Miyashita Y, Mutoh Y, Sajuri ZB (2006) Influence of Mn content on mechanical properties and fatigue behavior of extruded Mg alloys. Mater Sci Eng A 420:315–32110.1016/j.msea.2006.01.091 ↗
13. Cho DH, Lee BW, Park JY, Cho KM, Park IM (2017) Effect of Mn addition on corrosion properties of biodegradable Mg-4Zn-0.5Ca-xMn alloys. J Alloy Compd 695:1166–117410.1016/j.jallcom.2016.10.244 ↗
14. Sanjari M, Farzadfar A, Kabir ASH, Utsunomiya H, Jung I, Petrov R, Kestens L, Yue S (2014) Promotion of texture weakening in magnesium by alloying and thermomechanical processing: (I) alloying. J Mater Sci 49:1408–1425. https://doi.org/10.1007/s10853-013-7826-310.1007/s10853-013-7826-3 ↗
15. Zhang H, Ding Y, Li R, Shen Y, Lei J (2022) Achieving exceptional improvement of yield strength in Mg–Zn–Ca alloy wire by nanoparticles induced by extreme plastic deformation. Mater Sci Eng A 853:14373310.1016/j.msea.2022.143733 ↗
16. Duley P, Sanyal S, Bandyopadhyay TK, Mandal S (2019) Homogenization-induced age-hardening behavior and room temperature mechanical properties of Mg-4Zn-0.5Ca-0.16Mn (wt%) alloy. Mater Des 164:10755410.1016/j.matdes.2018.107554 ↗
17. Kim WC, Kim JG, Lee JY, Seok HK (2008) Influence of Ca on the corrosion properties of magnesium for biomaterial. Mater Lett 62:4146–414810.1016/j.matlet.2008.06.028 ↗
18. Ge Q, Dellasega D, Demir AG, Vedani M (2013) The processing of ultrafine-grained Mg tubes for biodegradable stents. Acta Biomater 9:8604–861010.1016/j.actbio.2013.01.010 ↗
19. Guo K, Liu M, Wang J, Sun Y, Li W, Zhu S, Wang L, Guan S (2020) Microstructure and texture evolution of fine-grained Mg-Zn-Y-Nd alloy micro-tubes for biodegradable vascular stents processed by hot extrusion and rapid cooling. J Magnes Alloy 8:873–88210.1016/j.jma.2019.09.012 ↗
20. Amani S, Faraji G, Mehrabadi HK, Abrinia K, Ghanbari H (2017) A combined method for producing high strength and ductility magnesium microtubes for biodegradable vascular stents application. J Alloy Compd 723:467–47610.1016/j.jallcom.2017.06.201 ↗
21. Guan K, Zhang J, Yang Q, Li B, Wu R, Meng J (2023) Effects of trace Ca addition on microstructure and mechanical properties of as-cast Mg-Sm-Gd-based alloy. Trans Nonferrous Metal Soc 33:46–5810.1016/S1003-6326(22)66089-8 ↗
22. Hradilová M, Vojtěch D, Kubásek J, Čapek J, Vlach M (2013) Structural and mechanical characteristics of Mg–4Zn and Mg–4Zn–0.4Ca alloys after different thermal and mechanical processing routes. Mater Sci Eng A 586:284–29110.1016/j.msea.2013.08.008 ↗
23. Hofstetter J, Becker M, Martinelli E, Weinberg AM, Mingler B, Kilian H, Pogatscher S, Uggowitzer PJ, Löffler JF (2014) High-strength low-alloy (HSLA) Mg–Zn–Ca alloys with excellent biodegradation performance. JOM 66:566–57210.1007/s11837-014-0875-5 ↗
24. Ibrahim H, Luo A, Dean D, Elahinia M (2019) Effect of Zn content and aging temperature on the in-vitro properties of heat-treated and Ca/P ceramic-coated Mg-0.5%Ca-x%Zn alloys. Mater Sci Eng C 103:10970010.1016/j.msec.2019.04.079 ↗
25. Schäublin RE, Becker M, Cihova M, Gerstl SSA, Deiana D, Hébert C, Pogatscher S, Uggowitzer PJ, Löffler JF (2022) Precipitation in lean Mg–Zn–Ca alloys. Acta Mater 239:11822310.1016/j.actamat.2022.118223 ↗
26. Cho DH, Avey T, Nam KH, Dean D, Luo AA (2022) In vitro and in vivo assessment of squeeze-cast Mg-Zn-Ca-Mn alloys for biomedical applications. Acta Biomater 150:442–45510.1016/j.actbio.2022.07.040 ↗
27. Fatemi SM, Paul H (2021) Characterization of continuous dynamic recrystallization in WE43 magnesium alloy. Mater Chem Phys 257:12372610.1016/j.matchemphys.2020.123726 ↗
28. Gautam PC, Biswas S (2021) On the possibility to reduce ECAP deformation temperature in magnesium: deformation behaviour, dynamic recrystallization and mechanical properties. Mater Sci Eng A 812:14110310.1016/j.msea.2021.141103 ↗
29. Du P, Furusawa S, Furushima T (2022) Continuous observation of twinning and dynamic recrystallization in ZM21 magnesium alloy tubes during locally heated dieless drawing. J Magnes Alloys 10:730–74210.1016/j.jma.2021.06.001 ↗
30. Pan X, Wang L, Lu P et al (2022) Unveiling the planar deformation mechanisms for improved formability in pre-twinned AZ31 Mg alloy sheet at warm temperature. J Magnes Alloy. https://doi.org/10.1016/j.jma.2022.11.01010.1016/j.jma.2022.11.010 ↗
31. Kamran J, Shamas UD, Tariq NH, Ali F, Hasan BA (2015) The beneficial effect of AgIn addition on deformation behavior, microstructure and texture in Mg–Al–Zn alloy during single pass warm rolling. Mater Des 81:11–2010.1016/j.matdes.2015.05.029 ↗
32. Wu M, Chen J, Yan H, Xia W, Su B, Deng Y, Shen Y (2022) Effect of Ca addition on the mechanical properties and thermal conductivity of Mg-2Ga alloy. Mater Sci Eng A 861:14432210.1016/j.msea.2022.144322 ↗
33. Kubin LP, Mortensen A (2003) Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues. Scripta Mater 48:119–12510.1016/S1359-6462(02)00335-4 ↗
34. Ding Z, Gao J, Jiao Z, Wu H, Chen A, Zhu J (2023) Strain-magnetization property of Ni-Mn-Ga (Co, Cu) microwires. Rare Met 42:244–25310.1007/s12598-022-02071-5 ↗
35. Dong B, Che X, Wang Q, Meng M, Gao Z, Ma J, Yang F, Zhang Z (2020) Refining the microstructure and modifying the texture of the AZ80 alloy cylindrical tube by the rotating backward extrusion with different rotating revolutions. J Alloy Compd 836:15544210.1016/j.jallcom.2020.155442 ↗
36. Wang F, Wu H, Dong L, Pan G, Zhou X, Wang S, Guo R, Wu G, Gao J, Dai F, Mao X (2023) Atomic-scale simulations in multi-component alloys and compounds: a review on advances in interatomic potential. J Mater Sci Technol 165:49–6510.1016/j.jmst.2023.05.010 ↗
37. Wang JY, Li N, Alizadeh R, Monclús MA, Cui YW, Molina-Aldareguía JM, LLorca J (2019) Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys. Acta Mater 170:155–16510.1016/j.actamat.2019.03.027 ↗
38. Wu H, Dong L, Wang S, Wu G, Gao J, Yang X, Zhou X, Mao X (2023) Local chemical ordering coordinated thermal stability of nanograined high-entropy alloys. Rare Met 42:1645–165510.1007/s12598-022-02194-9 ↗
39. Cheng Z, Wang S, Wu G, Gao J, Yang X, Wu H (2022) Tribological properties of high-entropy alloys: A review. Int J Miner Metall Mater 29:389–40310.1007/s12613-021-2373-4 ↗
40. Argade GR, Panigrahi SK, Mishra RS (2012) Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium. Corros Sci 58:145–15110.1016/j.corsci.2012.01.021 ↗
41. Ralston KD, Birbilis N (2010) Effect of grain size on corrosion: a review. Corrosion 66:07500510.5006/1.3462912 ↗
42. Bakhsheshi-Rad HR, Abdul-Kadir MR, Idris MH, Farahany S (2012) Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys. Corros Sci 64:184–19710.1016/j.corsci.2012.07.015 ↗
43. Zhang Y, Li J, Li J (2017) Effects of calcium addition on phase characteristics and corrosion behaviors of Mg-2Zn-0.2Mn-xCa in simulated body fluid. J Alloy Compd 728:37–4610.1016/j.jallcom.2017.08.264 ↗
44. Zhang X, Yuan G, Mao L, Niu J, Ding W (2012) Biocorrosion properties of as-extruded Mg–Nd–Zn–Zr alloy compared with commercial AZ31 and WE43 alloys. Mater Lett 66:209–21110.1016/j.matlet.2011.08.079 ↗
45. Radha R, Sreekanth D (2017) Insight of magnesium alloys and composites for orthopedic implant applications–a review. J Magnes Alloy 5:286–31210.1016/j.jma.2017.08.003 ↗
46. Xin Y, Hu T, Chu PK (2011) In vitro studies of biomedical magnesium alloys in a simulated physiological environment: a review. Acta Biomater 7:1452–145910.1016/j.actbio.2010.12.004 ↗