Synthesis, characterization and photovoltaic studies of CuInS2 nanostructures
Source abstract
Abstract
In this investigation, (1,8-diamino-3,6-dioxaoctan)copper(II)sulfate, ([Cu(DADO)]SO4), bis(propylenediamine)copper(II)sulfate, and ([Cu(pn)2]SO4) were applied as copper precursors to fabricate CuInS2 (CIS) nanostructures in presence of microwave irradiation. Besides the effect of copper precursor, the effect of microwave power and time of irradiation on morphology of CuInS2 nanostructures were investigated. The as-prepared products were analyzed by XRD, PL, FT-IR, EDS, and SEM. The results of XRD patterns were indicated that pure CuInS2 with tetragonal phase could be only obtained after annealing at 400 °C for 2 h in a mixture of 85 % Ar and 15 % H2 gases. SEM images were shown that regular hierarchical nanostructures of CuInS2 were obtained with the aid of [Cu(pn)2]SO4 as copper precursor under 900 W irradiation power for 12 min. The photovoltaic behaviors of as-synthesized CuInS2 nanostructures were studied after deposition of CdS film on chemical bath. CuInS2 film was directly deposited on the surface of the CdS film through doctor blade method. The as-deposited CdS/CuInS2 films were applied in photovoltaic measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. M.A. Green, K. Emery, D.L. King, S. Igari, W. Warta, Prog. Photovolt. Res. Appl. 110, 355 (2002)10.1002/pip.453 ↗
2. H.J. Lewerenz, H. Goslowsky, K.D. Husemann, S. Fiechter, Nature 321, 687 (1986)10.1038/321687a0 ↗
3. B. Tell, J.L. Shay, H.M. Kasper, Electrical properties. Phys. Rev. B 4, 2463 (1971)10.1103/PhysRevB.4.2463 ↗
4. C.J. Carmalt, D.E. Morrison, I.P. Parkin, J. Mater. Chem. 8, 2209 (1998)10.1039/a804430i ↗
5. A. Pein, M. Baghbanzadeh, T. Rath, W. Haas, E. Maier, H. Amenitsch, F. Hofer, C.O. Kappe, G. Trimmel, Inorg. Chem. 50, 193 (2011)10.1021/ic101651p ↗
6. S. Han, M. Kong, Y. Guo, M. Wang, Mater. Lett. 63, 1192 (2009)10.1016/j.matlet.2009.02.032 ↗
7. T. Nyari, P. Barvinschi, R. Băies, P. Vlăzan, F. Barvinschic, I. Dékány, J. Cryst. Growth 275, 2383 (2005)10.1016/j.jcrysgro.2004.11.343 ↗
8. S.L. Castro, S.G. Bailey, K.K. Banger, A.F. Hepp, Chem. Mater. 15, 3142 (2005)10.1021/cm034161o ↗
9. M. Susaki, Jpn. J. Appl. Phys. 44, 866 (2005)10.1143/JJAP.44.L866 ↗
10. J.R. Lill, Microwave Assisted Proteomics (RSC Publishing, Cambridge, 2009)10.1039/9781847559838 ↗
11. C. Gabriel, S. Gabriel, E.H. Grant, B.S.J. Halstead, D.M.P. Mingos, Chem. Soc. Rev. 27, 213 (1998)10.1039/a827213z ↗
12. J.C. Jansen, A. Arafat, A.K. Barakat, H. van Bekkum, in Molecular Sieves, ed. by M.L. Occelli, H.E. Rolson. Synthesis of Microporous Materials, vol 1 (Van Nostrand Reinhold, New York, 1992), p. 507
13. T. Hyeon, Chem. Commun. 927–934 (2003). doi: 10.1039/B207789B10.1039/b207789b ↗
14. J. Rockenberger, E.C. Scher, A.P. Alivisatos, J. Am. Chem. Soc. 121, 11595 (1999)10.1021/ja993280v ↗
15. F. Mohandes, F. Davar, M. Salavati-Niasari, J. Magn. Magn. Mater. 322, 872 (2010)10.1016/j.jmmm.2009.11.019 ↗
16. F. Zhang, F.L. Bei, J.M. Cao, X. Wang, J. Solid State Chem. 181, 143 (2008)10.1016/j.jssc.2007.11.004 ↗
17. S. Gholamrezaei, M. Salavati-Niasari, D. Ghanbari, J. Ind. Eng. Chem. 20, 4000 (2014)10.1016/j.jiec.2013.12.103 ↗
18. M. Masjedi-Arani, M. Salavati-Niasari, D. Ghanbari, G. Nabiyouni, Ceram. Int. 40, 495 (2014)10.1016/j.ceramint.2013.06.029 ↗
19. S. Gholamrezaei, M. Salavati-Niasari, D. Ghanbari, J. Ind. Eng. Chem. 20, 3335 (2014)10.1016/j.jiec.2013.12.017 ↗
20. D. Ghanbari, M. Salavati-Niasari, M. Sabet, Compos. B 45, 550 (2013)10.1016/j.compositesb.2012.09.007 ↗
21. M. Salavati-Niasari, F. Davar, Z. Fereshteh, Chem. Eng. J. 146, 498 (2009)10.1016/j.cej.2008.09.042 ↗
22. X. Li, X. Zhang, Z. Li, Y. Qian, Solid State Commun. 137, 581 (2009)10.1016/j.ssc.2006.01.031 ↗
23. H.R. Momenian, S. Gholamrezaei, M. Salavati-Niasari, B. Pedram, F. Mozaffar, D. Ghanbari, J. Cluster Sci. 24, 1031 (2013)10.1007/s10876-013-0595-y ↗
24. Y.-B. Dong, J.-P. Ma, G.-X. Jin, R.-Q. Huang, M.D. Smith, Dalton Trans. 4324–4330 (2003). doi: 10.1039/B310591C10.1039/B310591C ↗
25. I. Konovalov, Thin Solid Film 451, 413 (2004)10.1016/j.tsf.2003.10.115 ↗
26. M. Salavati-Niasari, B. Shoshtari-Yeganeh, F. Mohandes, Mater. Res. Bull. 48, 1745 (2013)10.1016/j.materresbull.2012.12.076 ↗
27. Y. Qi, K. Tang, S. Zeng, W. Zhou, Microporous Mesoporous Mater. 114, 395 (2008)10.1016/j.micromeso.2008.01.027 ↗
28. O. Amiri, M. Salavati-Niasari, M. Sabet, D. Ghanbari, Mater. Sci. Semicond. Process. 16, 1485 (2013)10.1016/j.mssp.2013.04.026 ↗
29. A. Sobhani, M. Salavati-Niasari, Mater. Res. Bull. 48, 3204 (2013)10.1016/j.materresbull.2013.04.086 ↗
30. A. Syamal, P.K. Mandal, J. Inorg. Nucl. Chem. 43, 609 (1981)10.1016/0022-1902(81)80516-7 ↗
31. E. Esmaeili, M. Salavati-Niasari, F. Mohandes, F. Davar, H. Seyghalkar, Chem. Eng. J. 170, 278 (2008)10.1016/j.cej.2011.03.010 ↗
32. S.C. Singh, R. Gopal, J. Phys. Chem. C 112, 2812 (2008)10.1021/jp0753676 ↗
33. M. Sabet, M. Salavati Niasari, D. Ghanbari, O. Amiri, N. Mir, M. Dadkhah, Mater. Sci. Semicond. Process. 25, 98 (2014)10.1016/j.mssp.2013.09.017 ↗
34. M. Sabet, M. Salavati Niasari, D. Ghanbari, O. Amiri, M. Yousefi, Mater. Sci. Semicond. Process. 16, 696 (2013)10.1016/j.mssp.2012.12.011 ↗
35. M. Mousavi Kamazani, M. Salavati Niasari, M. Sadeghinia, Mater. Lett. 142, 145 (2015)10.1016/j.matlet.2014.12.014 ↗
36. S. Peng, F. Cheng, J. Liang, Z. Tao, J. Chen, J. Alloys Compd. 481, 786 (2005)10.1016/j.jallcom.2009.03.084 ↗
37. J. Feng, J. Han, X. Zhao, Prog. Org. Coat. 64, 268 (2005)10.1016/j.porgcoat.2008.08.022 ↗