Effect of annealing temperature on the characteristics and sensing properties of WO3 nanowires
Source abstract
Abstract
A uniform WO3 nanowire structure was prepared by two-step thermal oxidation method on Si substrate. WO3 nanowires show different morphology and crystal structures after annealing at different temperatures. The influence of annealing temperature on WO3 nanowires was investigated by SEM, TEM and XRD. Higher crystallization property and lower surface state was obtained with higher annealing temperature. The gas sensing properties of the WO3 nanowires with various annealing temperatures to NO2 with the concentration ranging from 1 to 4 ppm were examined at different temperatures ranging from room temperature to 200 °C. The results indicate that WO3 nanowires can greatly lower the working temperature of sensors and sensors based on WO3 nanowires show p-type or n-type sensing behaviors depending on annealing temperatures. Possible sensing mechanism of p-type WO3 nanowires and the influence of annealing temperature on sensing types was explained. This work might supply new ideas about gas sensing mechanisms and open a new way to develop p-type WO3 sensing materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. K. Okano, T. Totsuka, Absorption of nitrogen dioxide by sunflower plants grown at various levels of nitrate. New Phytol. 102, 551–562 (1986)10.1111/j.1469-8137.1986.tb00831.x ↗
2. G. Eranna, B. Joshi, D. Runthala, R. Gupta, Oxide materials for development of integrated gas sensors-A comprehensive review. Crit. Rev. Solid State Mater. Sci. 29, 111–188 (2004)10.1080/10408430490888977 ↗
3. R. Binions, A.J.T. Naik, Metal oxide semiconductor gas sensors in environmental monitoring, in Semiconductor Gas Sensors, ed. by R. Jaaniso, O.K. Tan (Woodhead Publishing Limited, Oxford, 2013), pp. 433–46610.1533/9780857098665.4.433 ↗
4. E. Lackner, J. Krainer, R. Wimmer-Teubenbacher, F. Sosada, M. Deluca, C. Gspan, K. Rohracher, E. Wachmann, A. Köck, Carbon monoxide detection with CMOS integrated thin film SnO2 gas sensor. Mater. Today 4, 7128–7131 (2017)10.1016/j.matpr.2017.08.007 ↗
5. D. Mardare, N. Cornei, C. Mita, D. Florea, A. Stancu, V. Tiron, A. Manole, C. Adomnitei, Low temperature TiO2, based gas sensors for CO2. Ceram. Int. 42, 7353–7359 (2016)10.1016/j.ceramint.2016.01.137 ↗
6. Y. Wang, B. Liu, D. Cai, H. Li, Y. Liu, D. Wang, L. Wang, Q. Li, T. Wang, Room-temperature hydrogen sensor based on grain-boundary controlled Pt decorated In2O3 nanocubes. Sens. Actuators B 201, 351–359 (2014)10.1016/j.snb.2014.05.013 ↗
7. Z. Wang, M. Hu, Y. Wei, J. Liu, Y. Qin, Low-temperature NO2 sensing properties and morphology-controllable solvothermal synthesis of tungsten oxide nanosheets/nanorods. Appl. Surf. Sci. 362, 525–531 (2016)10.1016/j.apsusc.2015.11.140 ↗
8. W. Zhang, M. Hu, X. Liu, Y. Wei, N. Li, Y. Qin, Synthesis of the cactus-like silicon nanowires/tungsten oxide nanowires composite for room-temperature NO2, gas sensor. J. Alloys Compd. 679, 391–399 (2016)10.1016/j.jallcom.2016.03.287 ↗
9. B.B. Cao, J.J. Chen, X.J. Tang, W.L. Zhou, Growth of monoclinic WO3 nanowire array for highly sensitive NO2 detection. J. Mater. Chem. 19, 2323–2327 (2009)10.1039/b816646c ↗
10. N.V. Hieu, H.V. Vuong, N.V. Duy, N.D. Hoa, A morphological control of tungsten oxide nanowires by thermal evaporation method for sub-ppm NO2 gas sensor application. Sens. Actuators B 171–172, 760–768 (2012)10.1016/j.snb.2012.05.069 ↗
11. J.Z. Ou, M.Z. Ahmad, K. Latham, K. Kalantar-Zadeh, G. Sberveglieri, W. Wlodarski, Synthesis of the nanostructured WO3 via anodization at elevated temperature for H2 sensing applications. Procedia Eng. 25, 247–251 (2017)10.1016/j.proeng.2011.12.061 ↗
12. S. An, S. Park, H. Ko, C. Lee, Fabrication of WO3 nanotube sensors and their gas sensing properties. Ceram. Int. 40, 1423–1492 (2014)10.1016/j.ceramint.2013.07.025 ↗
13. F. Trani, M. Causà, S. Lettieri, A. Setaro, D. Ninno, V. Barone, P. Maddalena, Role of surface oxygen vacancies in photoluminescence of tin dioxide nanobelts. Microelectron. J. 40, 236–238 (2009)10.1016/j.mejo.2008.07.060 ↗
14. H. Wang, K. Dou, W.Y. Teoh, Y. Zhan, T.F. Hung, F. Zhang, J. Xu, R. Zhang, A.L. Rogach, Engineering of facets, band structure, and gas-sensing properties of hierarchical Sn2+-doped SnO2 nanostructures. Adv. Funct. Mater. 23, 4847–4853 (2013)10.1002/adfm.201300303 ↗
15. G. Pacchioni, Oxygen vacancy: the invisible agent on oxide surfaces. Chem. Phys. Chem. 4, 1041–1047 (2003)10.1002/cphc.200300835 ↗
16. Y. Wei, C. Chen, G. Yuan, S. Gao, SnO2 nanocrystals with abundant oxygen vacancies: preparation and room temperature NO2 sensing. J. Alloys Compd. 681, 43–49 (2016)10.1016/j.jallcom.2016.04.220 ↗
17. Y. Li, C. Wang, H. Zheng, F. Wan, F. Yu, X. Zhang, Y. Liu, Surface oxygen vacancies on WO3 contributed to enhanced photothermo-synergistic effect. Appl. Surf. Sci. 391, 654–661 (2017)10.1016/j.apsusc.2016.07.042 ↗
18. Z. Wang, M. Hu, Y. Wang, X. Liu, Y. Qin, Effect of solvothermal reaction temperature on the morphology of WO3 nanocrystals and their low-temperature NO2 sensing properties. J. Alloys Compd. 665, 173–179 (2016)10.1016/j.jallcom.2016.01.056 ↗
19. S. Ma, M. Hu, P. Zeng, M. Li, W. Yan, Y. Qin, Synthesis and low-temperature gas sensing properties of tungsten oxide nanowires/porous silicon composite. Sens. Actuators B 192, 341–349 (2014)10.1016/j.snb.2013.10.121 ↗
20. S.S. Shendage, V.L. Patil, S.A. Vanalakar, S.P. Patil, N.S. Harale, J.L. Bhosale, J.H. Kim, P.S. Patil, Sensitive and selective NO2 gas sensor based on WO3 nanoplates. Sens. Actuators B 240, 426–433 (2017)10.1016/j.snb.2016.08.177 ↗
21. S.K. Yong, S.C. Ha, K. Kim, H. Yang, S. Choi, Y.T. Kim, J.T. Park, C.H. Lee, J. Choi, J. Paek, K. Lee, Room-temperature semiconductor gas sensor based on nonstoichiometric tungsten oxide nanorod film. Appl. Phys. Lett. 86, 213105 (2005)10.1063/1.1929872 ↗
22. T. Siciliano, A. Tepore, G. Micocci, A. Genga, M. Siciliano, E. Filippo, Transition from n- to p-type electrical conductivity induced by ethanol adsorption on α-tellurium dioxide nanowires. Sens. Actuators B 138, 207–213 (2009)10.1016/j.snb.2009.02.007 ↗
23. I. Kosc, I. Hotovy, V. Rehacek, R. Griesseler, M. Predanocy, M. Wilke, L. Spiess, Sputtered TiO2 thin films with NiO additives for hydrogen detection. Appl. Surf. Sci. 269, 110–115 (2013)10.1016/j.apsusc.2012.09.061 ↗
24. P.M. Faia, J. Libardi, C.S. Louro, Effect of V2O5 doping on p- to n-conduction type transition of TiO2:WO3 composite humidity sensors. Sens. Actuators B 222, 952–964 (2015)10.1016/j.snb.2015.09.039 ↗
25. H. Li, W. Xie, T. Ye, B. Liu, S. Xiao, C. Wang, Y. Wang, Q. Li, T. Wang, Temperature-dependent abnormal and tunable p–n response of tungsten oxide-tin oxide based gas sensors. Acs Appl. Mater. Interfaces 7, 24887 (2015)10.1021/acsami.5b08211 ↗
26. S. Pati, P. Banerji, S.B. Majumder, n- to p- type carrier reversal in nanocrystalline indium doped ZnO thin film gas sensors. Int. J. Hydrog. Energy 39, 15134–15141 (2014)10.1016/j.ijhydene.2014.07.075 ↗
27. Y. Wu, M. Hu, X. Wei, A study of transition from n-to p-type based on hexagonal WO3 nanorods sensor. Chin. Phys. B 23, 208–214 (2014)
28. Y. Wei, M. Hu, W. Yan, D. Wang, Y. Qin, Hydrothermal synthesis porous silicon/tungsten oxide nanorods composites and their gas-sensing properties to NO2 at room temperature. Appl. Surf. Sci. 353, 79–86 (2015)10.1016/j.apsusc.2015.06.064 ↗
29. J. Tan, M. Dun, L. Li, J. Zhao, X. Li, Y. Hu, G. Huang, W. Tan, X. Huang, Self-template derived CuO nanowires assembled microspheres and its gas sensing properties. Sens. Actuators B 252, 1–8 (2017)10.1016/j.snb.2017.05.107 ↗
30. S. Hussain, T. Liu, M.S. Javed, N. Aslam, W. Zeng, Highly reactive 0D ZnS nanospheres and nanoparticles for formaldehyde gas-sensing properties. Sens. Actuators B 239, 1243–1250 (2017)10.1016/j.snb.2016.09.128 ↗
31. Y. Zhou, X. Lin, Y. Wang, G. Liu, X. Zhu, Y. Huang, Y. Gao, C. Gao, M. Zhou, Study on gas sensing of reduced graphene oxide/ZnO thin film at room temperature. Sens. Actuators B 240, 870–880 (2017)10.1016/j.snb.2016.09.064 ↗
32. R.S. Ganesh, E. Durgadevi, M. Navaneethan, V.L. Patil, S. Ponnusamy, C. Muthamizhchelvan, S. Kawasaki, P.S. Patil, Y. Hayakawa, Low temperature ammonia gas sensor based on Mn-doped ZnO nanoparticle decorated microspheres. J. Alloys Compd. 721, 182–190 (2017)10.1016/j.jallcom.2017.05.315 ↗
33. Y. Qin, X. Zhang, Y. Wang, Y. Liu, Remarkable improvement of W18O49/TiO2 heteronanowires in ambient temperature-responsive NO2-sensing abilities and its unexpected n-p transition phenomenon. Sens. Actuators B 240, 477–486 (2017)10.1016/j.snb.2016.09.005 ↗
34. D.E. Williams, Semiconducting oxides as gas-sensitive resistors. Sens. Actuators B 57, 1–16 (1999)10.1016/S0925-4005(99)00133-1 ↗
35. C. Liu, H. Lu, J. Zhang, Z. Yang, G. Zhu, F. Yin, J. Gao, C. Chen, X. Xin, Abnormal p-type sensing response of TiO2 nanosheets with exposed {001} facets. J. Alloys Compd. 705, 112–117 (2017)10.1016/j.jallcom.2017.02.118 ↗
36. Q. Hao, L. Li, X. Yin, S. Liu, Q. Li, T. Wang, Anomalous conductivity-type transition sensing behaviors of n-type porous α-Fe2O3 nanostructures toward H2S. Mater. Sci. Eng. B 176, 600–605 (2011)10.1016/j.mseb.2011.02.002 ↗
37. Y. Shen, S. Zhao, J. Ma, X. Chen, W. Wang, D. Wei, S. Gao, W. Liu, C. Han, B. Cui, Highly sensitive and selective room temperature alcohol gas sensors based on TeO2 nanowires. J. Alloys Compd. 664, 229–234 (2016)10.1016/j.jallcom.2015.12.247 ↗