journal article·2018-12

Effect of particle size distribution on the mechanical and electrical properties of reverse-offset printed Sn–Ag–Cu solder bumps

Min-Jung Son, Jae Won Jeong, Hyunchang Kim, Taik-Min Lee, Hoo-Jeong Lee, Inyoung Kim

Publisher page

Abstract

A reduction of the particle size used in solder pastes was shown to affect the electrical and mechanical properties of finely printed solder bumps. Sn–3.0Ag–0.5Cu solder nanoparticles were synthesized using a radio frequency thermal plasma system, and solder pastes were formulated for reverse-offset printing of solder bump arrays with a size of 30 µm. As the nanoparticle ratio in the paste increased, the degree of supercooling, ΔT, increased with a separation of the exothermic peaks for the solidification of β-Sn and the precipitation of intermetallic compounds (IMCs). The networks of finely precipitated IMCs formed at the boundaries of large β-Sn increased the shear strength to 73 MPa. However, insufficient flux deteriorated the electrical and mechanical properties because it delayed the solidification of primary β-Sn as well as the melting of the solder. As a result, the Sn–3.0Ag–0.5Cu solder paste containing a nanoparticle ratio of 25% exhibited an optimum printability for reverse-offset printing of solder bumps, and the resulting bumps had an electrical conductance of 0.4 mΩ and a shear strength of 73 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. K.J. Puttlitz, G.T. Galyon, J. Mater. Sci. Mater. Med. 18, 347–365 (2007)10.1007/s10854-006-9024-4 ↗
2. L.R. Garcia, W.R. Osório, L.C. Peixoto, A. Garcia, Mater. Charact. 61, 212–220 (2010)10.1016/j.matchar.2009.11.012 ↗
3. J. Keller, D. Baither, U. Wilke, G. Schmitz, Acta. Mater. 59, 2731–2741 (2011)10.1016/j.actamat.2011.01.012 ↗
4. D. Li, C. Liu, P.P. Conway, J. Electron. Mater. 35, 388–398 (2006)10.1007/BF02690524 ↗
5. R.R. Chromik, R.P. Vinci, S.L. Allen, M.R. Notis, Jom. 55, 66–69 (2003)10.1007/s11837-003-0144-5 ↗
6. Y. Takamatsu, H. Esaka, K. Shinozuka, Mater. Trans. 52, 189–195 (2011)10.2320/matertrans.M2010325 ↗
7. K.S. Kim, S.H. Huh, K. Suganuma, J. Alloys Compd. 352, 226–236 (2003)10.1016/S0925-8388(02)01166-0 ↗
8. S.L. Tay, A.S.M.A. Haseeb, M. Rafie Johan, Solder. Surf. Mount Technol. 23, 10–14 (2011)10.1108/09540911111099659 ↗
9. H. Zhang, Q.S. Zhu, Z.Q. Liu, L. Zhang, H. Guo, C.M. Lai, J. Mater. Sci. Technol. 30, 928–933 (2014)10.1016/j.jmst.2014.06.009 ↗
10. P. Yao, P. Liu, J. Liu, J. Alloys Compd. 462, 73–79 (2008)10.1016/j.jallcom.2007.08.041 ↗
11. S.K. Kang, D.Y. Shih, D. Leonard, D.W. Henderson, T. Gosselin, S.I. Cho, W.K. Choi, Jom. 56, 34 (2004)10.1007/s11837-004-0108-4 ↗
12. D. Lin, G.X. Wang, T.S. Srivatsan, M. Al-Hajri, M. Petraroli, Mater. Lett. 53, 333–338 (2002)10.1016/S0167-577X(01)00503-1 ↗
13. G.Y. Li, X.Q. Shi, Trans. Nonferrous Metals Soc. China 16, 739–743 (2006)10.1016/S1003-6326(06)60292-6 ↗
14. J.X. Wang, S.B. Xue, Z.J. Han, S.L. Yu, Y. Chen, Y.P. Shi, H. Wang, J. Alloys Compd. 467, 219–226 (2009)10.1016/j.jallcom.2007.12.033 ↗
15. P. Liu, P. Yao, J. Liu, J. Electron. Ma. 37, 874–879 (2008)10.1007/s11664-007-0366-3 ↗
16. A.K. Gain, Y.C. Chan, W.K. Yung, Microelectron. Reliab. 51, 975–984 (2011)10.1016/j.microrel.2011.01.006 ↗
17. L.C. Tsao, S.Y. Chang, C.I. Lee, W.H. Sun, C.H. Huang, Mater. Des. 31, 4831–4835 (2010)10.1016/j.matdes.2010.04.033 ↗
18. S. Chellvarajoo, M.Z. Abdullah, Mater. Des. 90, 499–507 (2016)10.1016/j.matdes.2015.10.142 ↗
19. X.D. Liu, Y.D. Han, H.Y. Jing, J. Wei, L.Y. Xu, Mater. Sci. Eng. A. Struct. Mater. 562, 25–32 (2013)10.1016/j.msea.2012.10.079 ↗
20. J.H. Lau, J. Electron. Packag. 138, 1–23 (2016)10.1115/1.4034037 ↗
21. S.K. Kang, P. Gruber, D.Y. Shih, Jom 60, 66–70 (2008)10.1007/s11837-008-0075-2 ↗
22. X. Liu, S. Xu, G.Q. Lu, D.A. Dillard, Microelectron. Reliab. 41, 1979–1992 (2001)10.1016/S0026-2714(01)00117-2 ↗
23. H. Hwang, S.M. Hong, J.P. Jung, C.S. Kang, Solder. Surf. Mount Technol. 15(2), 10–16 (2003)10.1108/09540910310479486 ↗
24. L.C. Yung, C.C. Fei, J.S. Mandeep, H.B. Abdullah, L.K. Wee, PloS. One. 9(5), 97484 (2014)10.1371/journal.pone.0097484 ↗
25. E.H. Amalu, N.N. Ekere, S. Mallik, Mater. Des. 32, 3189–3197 (2011)10.1016/j.matdes.2011.02.045 ↗
26. T.M. Lee, H.S. Han, B. Kim, S.W. Kwak, J.H. Noh, I. Kim, Thin solid films 548, 566–571 (2013)10.1016/j.tsf.2013.09.023 ↗
27. Y.M. Choi, E.S. Lee, T.M. Lee, K.Y. Kim, Microelectron. Eng. 134, 1–6 (2015)10.1016/j.mee.2014.12.007 ↗
28. Y. Gao, C. Zou, B. Yang, Q. Zhai, J. Liu, E. Zhuravlev, C. Schick, J. Alloys Compd. 484, 777–781 (2009)10.1016/j.jallcom.2009.05.042 ↗
29. C. Andersson, C. Zou, B. Yang, Y. Gao, J. Liu, Q. Zhai, In Electronics System-Integration Technology Conference. 2, pp. 915–922 (2008)
30. J. Szépvölgyi, I. Mohai, Z. Károly, L. Gál, J. Eur. Ceram. Soc. 28, 895–899 (2008)10.1016/j.jeurceramsoc.2007.09.034 ↗
31. M.J. Son, M. Kim, T.M. Lee, J. Kim, H.J. Lee, I. Kim, J. Mater. Process. Technol. 259, 126–133 (2018)10.1016/j.jmatprotec.2018.04.017 ↗