Powder extrusion molding of nanocrystalline WC-l0Co composite cemented carbide
Source abstract
Abstract
The rods that were shaped from nanocrystalline WC-10.21 Co-0.42 VCI Cr3 C2(wt%) composite powders by using powder extrusion molding (PEM) were investigated. The nanocrystalline WC-10.21 Co-0.42 VC/Cr3 C2 (wt%) composite powders were prepared by the spray thermal decomposition-continuous reduction and carburization technology. In order to improve the properties of rods shaped by using powder extrusion molding, the cold isostatic pressing (CIP) technology was used before or after debinding. Specimens were sintered by vacuum sintering and hot isostatic pressing (HIP). The density, Rockwell A hardness, magnetic coercivity, and magnetic saturation induction of sintered specimen were measured. The microstructure of the green bodies and the sintered specimens was studied by scanning electron microscopy (SEM). Results show that the rod formed by using powder extrusion molding after debinding and followed by cold isostatic pressing can be sintered to 99.5% density of composite cemented carbide rods with an average grain size of about 200–300 nm, magnetic coercivity of 30.4 KA/m, Rockwell A hardness of 92.6 and magnetic saturation induction of 85%. Superfine WC-10Co cemented carbide rods with excellent properties were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Injection Molding Process and Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Erik Lassner and Wolf-Dieter Schubert.Tungsten-Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds. London: Kluwer Academic/Plenum Publishers, 2000: 1–10
2. Gille G, Szesny B, Dreyer K,et al. Submicron and Ultrafine Grained HardMetals for Microdrills and Metal Cutting Inserts.International Journal of Refractory Metals and Hard Materials, 2002, 20(1): 3–2210.1016/S0263-4368(01)00066-X ↗
3. Cao Li-hong, Shi Dong-xia, Ouyang Shi-xi,et al. Study on Preparation of Ceramic Matrix Composite of WC-Co Ultrafine Powders.J. Wuhan Univ. Tech. -Mater. Sci. Ed., 1995, 10 (2): 40–46
4. Zhou Jian, Cheng Ji-ping, Mei Bing-chu,et al. Research on Microwave Sintering Alumina Ceramics.J. Wuhan Univ. Tech. -Mater. Sci. Ed., 1998, 13(3): 34–38
5. Parasiris A, Hartwig K T. Consolidation of Advanced WC-Co Powders.International Journal of Refractory Metals and Hard Materials, 2000, 18(1): 23–3110.1016/S0263-4368(00)00005-6 ↗
6. El-Eskandarany M Sherif, Mahday Amir A, Ahmed H A,et al. Synthesis and Characterizations of Ball-milled Nanocrystalline WC and Nanocomposite WC-Co Powders and Subsequent Consolidations.Journal of Alloys and Compounds, 2000, 312 (1–2): 315–32510.1016/S0925-8388(00)01155-5 ↗
7. K Rödiger, H van den Berg, K Dreyer,et al. Near-net-shaping in the Hardmetal Industry.Refractory Metals and Hard Materials, 2002, 18(2–3): 111–120
8. Baojun Zhu. Xuanhui Qu. Ying Tao. Powder Injection Molding of WC-8% Co Tungsten Cemented Carbide.International Journal of Refractory Metals and Hard Materials, 2002, 20(5–6): 389–39410.1016/S0263-4368(02)00015-X ↗
9. Yang Mujen, German Randall M. Nanophase and Superfine Cemented Carbides Processed by Powder Injection Molding.International Journal of Refractory Metals and Hard Materials, 1998, 16(2): 107–11710.1016/S0263-4368(98)00016-X ↗
10. Zhang Liying, Guo Zhimeng,et al. Effects of Bridged Particles on the Compressibility of Nanometer Cemented Carbide Powder.Journal of University of Science and Technology Beijing, 2002, 24(2): 103–106
11. Liu Xiaopan, Zhao Xiujian,et al. Influence of Shaping Technology on Properties of Pure Carbon Reaction Boned Silicon Carbide’s Green Body and Sinter.Journal of Wuhan University of Technology, 2003, 25 (3): 20–22
12. G Q Shao, X L Duan, B L Wu,et al. Continuous Reduction Carburisation Mechanism of Precursor-Derived Nanocrystalline WC-Co.Advances in Ceramic Matrix Composites VI, ed. by J P Singh, N P Bansal and E Ustundag. The American Ceramic Society: Ohio, USA, 2000, 207–217