Aqueous tape casting process with styrene-acrylic latex binder
Source abstract
Abstract
A commercial styrene-acrylic latex binder has been investigated as a good binder for aqueous Al2O3 suspensions tape-casting process. This paper focuses on the forming film mechanism of latex binder, the rheological behaviors of the suspensions, physical properties of green tapes and drying process of aqueous slurries with latex binder system. The drying process of the alumina suspensions is shown to follow a two-stage mechanism (the first stage: evoporation controlled process; and the second stage: diffusion controlled process). During the drying stage of the suspensions, the compressive force presses the latex particles and makes them be distorted, which results in cross-linking structure in contacted latex particles of the solidified tapes. A smooth-surface and high-strength green tape was fabricated by aqueous tape casting with latex binder system. The results from the SEM images of the crossing section microstructure of green tapes show that the latex is a very suitable binder for aqueous tape casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Materials Engineering and Processing · Innovations in Concrete and Construction Materials · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. D Hotza, P Greil. Review: Aqueous Tape Casting of Ceramic Powders.Mater. Sci. Eng. A. 1995, 202: 206–21710.1016/0921-5093(95)09785-6 ↗
2. X M Cui, S X Ouyang,et al. A Study on LOM with Water-based Tape Casting.Mater. Lett., 2003, 57: 1300–130410.1016/S0167-577X(02)00975-8 ↗
3. A Kristoffersson and E Carlstrom. Tape Casting of Alumina in Water with an Acrylic Latex Binder.J. Euro. Ceram. Soc., 1997, 17: 56–5910.1016/S0955-2219(96)00143-4 ↗
4. Hong Xiaoyin and Feng Hanbao.Doping Chemistry, SPCC, 2001, 9–20 (in Chinese)
5. C Pagnoux, F Doreau,et al. Aqueous Suspensions for Tape-casting Based on Acrylic Binders.J. Euro. Ceram. Soc., 1998, 18: 241–24710.1016/S0955-2219(97)00115-5 ↗
6. F Doreau, G Tari,et al. Processing of Aqueous Tape-casting of Alumina with Acrylic Emulsion Binders.J. Euro. Ceram. Soc., 1998, 18: 311–32110.1016/S0955-2219(97)00144-1 ↗
7. F Doreau, G. Tari,et al. Mechanical and Lamination Properties of Alumina Green Tapes Obtained by Aqueous Tape Casting.J. Euro. Ceram. Soc., 1999, 19: 2867–287310.1016/S0955-2219(99)00052-7 ↗
8. Carlos A Gutierrez, Rodrigo Moreno. Influence of Slip Preparation and Casting Conditions on Aqueous Tape Casting of Al2O3.Mater. R. Bull., 2001, 36: 2059–207210.1016/S0025-5408(01)00683-3 ↗
9. B J Briscoe, G Lo Biundo and N Ozkan. Drying Kinetics of Water-based Ceramic Suspensions for Tape Casting.Inter Ceramic., 1998, 24: 347–35710.1016/S0272-8842(97)00021-7 ↗
10. Tan Mengkwang. The Role of Coalescent of Film-forming Mechanism in Latex Paint.Doping Industry, 1996, (4): 32–35 (in Chinese)