Dynamics of Capillary-Driven Flow in 3D Printed Open Microchannels
Source abstract
Abstract
Microchannels have applications in microfluidic devices, patterns for micromolding, and even flexible electronic devices. Three-dimensional (3D) printing presents a promising alternative manufacturing route for these microchannels due to the technology’s relative speed and the design freedom it affords its users. However, the roughness of 3D printed surfaces can significantly influence flow dynamics inside of a microchannel. In this work, open microchannels are fabricated using four different 3D printing techniques: fused deposition modeling (FDM), stereolithography (SLA), selective laser sintering, and multi jet modeling. Microchannels printed with each technology are evaluated with respect to their surface roughness, morphology, and how conducive they are to spontaneous capillary filling. Based on this initial assessment, microchannels printed with FDM and SLA are chosen as models to study spontaneous, capillary-driven flow dynamics in 3D printed microchannels. Flow dynamics are investigated over short (∼10 –3 s), intermediate (∼1 s), and long (∼10 2 s) time scales. Surface roughness causes a start–stop motion down the channel due to contact line pinning, while the cross-sectional shape imparted onto the channels during the printing process is shown to reduce the expected filling velocity. A significant delay in the onset of Lucas-Washburn dynamics (a long-time equilibrium state where meniscus position advances proportionally to the square root of time) is also observed. Flow dynamics are assessed as a function of printing technology, print orientation, channel dimensions, and liquid properties. This study provides the first in-depth investigation of the effect of 3D printing on microchannel flow dynamics as well as a set of rules on how to account for these effects in practice. The extension of these effects to closed microchannels and microchannels fabricated with other 3D printing technologies is also discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Nanomaterials and Printing Technologies · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering and Materials Science, University of Minnesota − Twin Cities, 421 Washington Avenue Southeast, Minneapolis Minnesota 55455, United States
Funding
University of Minnesota · Industrial Partnership for Research in Interfacial and Materials Engineering, University of Minnesota
References (80)
Show source-provided references
1. Deppe, G.; Lindemann, C.; Koch, R.Development of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, Aug. 9–12, 2015.
2. Vetterli, M.; Schmid, R.; Schmid, M.; Harke, S.; Durand, T.; Wegener, K.Improving Energy Efficiency of Car Climate Control with SLS.Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, Aug. 9–12, 2015.
3. 10.1080/0785389070188178810.1080/07853890701881788 ↗
4. 10.1016/j.biomaterials.2010.04.05010.1016/j.biomaterials.2010.04.050 ↗
5. 10.1021/ac403397r10.1021/ac403397r ↗
6. 10.1007/s00170-012-4605-210.1007/s00170-012-4605-2 ↗
7. 10.1039/C6LC00163G10.1039/C6LC00163G ↗
8. 10.1088/0960-1317/6/1/02310.1088/0960-1317/6/1/023 ↗
9. 10.1039/B310802C10.1039/B310802C ↗
10. 10.1073/pnas.070495810410.1073/pnas.0704958104 ↗
11. 10.1039/b107835f10.1039/b107835f ↗
12. 10.1126/science.261.5123.89510.1126/science.261.5123.895 ↗
13. 10.1021/ac901398910.1021/ac9013989 ↗
14. 10.1021/ja960151v10.1021/ja960151v ↗
15. 10.1109/EDL.1981.2536710.1109/EDL.1981.25367 ↗
16. 10.1063/1.179238110.1063/1.1792381 ↗
17. 10.1016/j.snb.2007.09.07710.1016/j.snb.2007.09.077 ↗
18. 10.1021/ac00085a00310.1021/ac00085a003 ↗
19. 10.1021/am507539a10.1021/am507539a ↗
20. 10.1039/C4AN01476F10.1039/C4AN01476F ↗
21. 10.1039/b103848f10.1039/b103848f ↗
22. 10.1021/acs.analchem.5b0090310.1021/acs.analchem.5b00903 ↗
23. 10.1021/am505580610.1021/am5055806 ↗
24. Berthier, J.; Brakke, K.; Berthier, E.Open Microfluidics;Scrivener Publishing LLC/John Wiley & Sons:Salem, MA, 2016; pp13–48,57–73,229–252.
25. 10.1016/j.jcis.2011.07.01910.1016/j.jcis.2011.07.019 ↗
26. 10.1002/aelm.20160029310.1002/aelm.201600293 ↗
27. 10.1016/j.cattod.2009.07.02610.1016/j.cattod.2009.07.026 ↗
28. 10.1081/CR-12000180710.1081/CR-120001807 ↗
29. van Weeren, R.; Agarwala, M.; Jamalabad, V. R.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S. C.; Ballard, C.Quality of Parts Processed by Fused Deposition.Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, Aug. 7–9, 1995.
30. Venuvinod, P. K.; Ma, W.Rapid Prototyping: Laser-Based and Other Technologies;Kluwer Academic Publishers:Norwell, MA, 2004; pp207–215.10.1007/978-1-4757-6361-4 ↗
31. Hedges, M.; Marin, A. B.3D Aerosol Jet ® Printing - Adding Electronics Functionality to RP/RM.Proceedings of the Direct Digital Manufacturing Conference, Berlin, March 14–15, 2012.
32. 10.1049/el.2013.152810.1049/el.2013.1528 ↗
33. 10.1007/s10404-013-1145-510.1007/s10404-013-1145-5 ↗
34. 10.1007/BF0146110710.1007/BF01461107 ↗
35. 10.1103/PhysRev.17.27310.1103/PhysRev.17.273 ↗
36. 10.1017/S002211209600272810.1017/S0022112096002728 ↗
37. 10.1021/jp206582610.1021/jp2065826 ↗
38. 10.1021/la960520110.1021/la9605201 ↗
39. 10.1016/0021-9797(71)90120-210.1016/0021-9797(71)90120-2 ↗
40. 10.1021/la901736n10.1021/la901736n ↗
41. 10.1021/la971224710.1021/la9712247 ↗
42. 10.1039/C3LC51360B10.1039/C3LC51360B ↗
43. Gibbs, J. W.The Scientific Papers of J. W. Gibbs;Dover:New York, 1961; pp326.10.2307/1439616 ↗
44. 10.1021/ie50320a02410.1021/ie50320a024 ↗
45. Berthier, J.; Brakke, K.The Physics of Microdroplets;Scrivener Publishing LLC/John Wiley & Sons:Salem, MA, 2012; pp31–39,112–140.10.1002/9781118401323 ↗
46. 10.1039/df948030001610.1039/df9480300016 ↗
47. 10.1039/df948030000510.1039/df9480300005 ↗
48. 10.1021/j150479a00810.1021/j150479a008 ↗
49. 10.1021/ja01140a01410.1021/ja01140a014 ↗
50. Johnson R. E. · 1964 · 43 · 11210.1021/ba-1964-0043.ch007 ↗
51. 10.1098/rstl.1805.000510.1098/rstl.1805.0005 ↗
52. de Gennes, P.G.; Brochard-Wyart, F.; Quéré, D.Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves;Springer Science+Business Media LLC:New York, 2015; 69–71.
53. 10.1016/0021-9797(77)90251-X10.1016/0021-9797(77)90251-X ↗
54. 10.1103/PhysRevE.77.06730110.1103/PhysRevE.77.067301 ↗
55. 10.1103/PhysRevLett.106.19450110.1103/PhysRevLett.106.194501 ↗
56. 10.1103/PhysRevE.80.05630910.1103/PhysRevE.80.056309 ↗
57. 10.1021/la901993r10.1021/la901993r ↗
58. 10.1088/0953-8984/21/46/46412510.1088/0953-8984/21/46/464125 ↗
59. 10.1021/la204572410.1021/la2045724 ↗
60. SLS-microchannels were printed by Xometry, Inc. (www.xometry.com).
61. Object 500 parts were printed at Stratasys (Eden Prairie, MN), and Object 260 parts were printed at the Medical Devices Center, University of Minnesota (Minneapolis, MN).
62. 10.1080/1478644230863414410.1080/14786442308634144 ↗
63. 10.3934/biophy.2014.1.3110.3934/biophy.2014.1.31 ↗
64. 10.1209/epl/i1997-00389-210.1209/epl/i1997-00389-2 ↗
65. Dolomite’s ‘Fluidic Factory’ produces parts using FDM that are watertight after printing with no post-processing (http://www.dolomite-microfluidics.com/webshop/fluidic_factory).
66. 10.1073/pnas.63.2.29210.1073/pnas.63.2.292 ↗
67. 10.1017/S002211209800253510.1017/S0022112098002535 ↗
68. 10.1073/pnas.040772110210.1073/pnas.0407721102 ↗
69. 10.1007/s10404-008-0263-y10.1007/s10404-008-0263-y ↗
70. 10.1016/j.jcis.2004.07.01710.1016/j.jcis.2004.07.017 ↗
71. 10.1006/jcis.1994.109210.1006/jcis.1994.1092 ↗
72. 10.1016/S0927-7757(99)00327-110.1016/S0927-7757(99)00327-1 ↗
73. 10.1021/la801753t10.1021/la801753t ↗
74. 10.1126/science.106623810.1126/science.1066238 ↗
75. 10.1039/C3LC50956G10.1039/C3LC50956G ↗
76. 10.1088/0960-1317/15/2/R0110.1088/0960-1317/15/2/R01 ↗
77. Priedeman, W. R., Jr.; Smith, D. T.Smoothing Method for Layered Deposition Modeling. U.S. Patent 8,123,999, Feb. 28, 2012.
78. 10.1038/lsa.2014.5610.1038/lsa.2014.56 ↗
79. 10.1016/j.physrep.2013.07.00510.1016/j.physrep.2013.07.005 ↗
80. 10.1038/nphoton.2016.12110.1038/nphoton.2016.121 ↗