Optimum percentage of steel fibres of HPFRCC for reduction of transverse reinforcement in beam–column joints
Source abstract
Abstract
Reinforcement congestion causes problems during construction, including improper concrete pouring and concrete vibration. In this study, the replacement of normal concrete by high-performance fibre-reinforced cementitious composites (HPFRCC) has been investigated in order to reduce the amount of transverse reinforcement and prevent reinforcement congestion in beam–column joints. Uniaxial compression and tension tests were used to determine the mechanical properties of HPFRCC materials. In order to investigate the effects of HPFRCC on improving and upgrading the joint strength, five half-scale exterior beam–column joint connections were tested under incremental cyclic lateral loading. The tested specimens consisted of two normal concrete control specimens with and without specific seismic details and three specimens of HPFRCC with different percentages of steel fibres. The cracking patterns, hysteresis behavior, bearing capacity, energy absorption and damping percentage of all test specimens were analysed and compared with the response of normal concrete specimens. Results show that the use of HPFRCC materials in the joint area improves seismic behavior and significantly increases load-bearing capacity, energy absorption and ductility. Moreover, it prevents the shear failure of the joint and the formation of the flexural plastic hinge in the beam.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
MSc student, Department of Civil Engineering, Varamin-Pishva Branch, Islamic Azad University, Varamin, Iran
Assistant Professor, Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran (corresponding author: )
Assistant Professor, Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
References (43)
Show source-provided references
1. ACI (American Concrete Institute) (2019) ACI 318-19: Building code requirements for structural concrete and commentary. American Concrete Institute, Farmington Hills, MI, USA.
2. ASTM (2010) C39/C39M-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA, USA.
3. Bayasi Z · Structural Journal · 2002 · 99 · 772
4. 10.1016/j.engstruct.2013.02.02010.1016/j.engstruct.2013.02.020 ↗
5. 10.1016/j.matdes.2015.07.16410.1016/j.matdes.2015.07.164 ↗
6. 10.1016/j.compstruct.2015.11.04610.1016/j.compstruct.2015.11.046 ↗
7. Craig RJ · Special Publication · 1984 · 81 · 125
8. Filiatrault A · Structural Journal · 1995 · 92 · 543
9. 10.1016/j.conbuildmat.2017.03.16710.1016/j.conbuildmat.2017.03.167 ↗
10. Gefken PR · Structural Journal · 1989 · 86 · 168
11. Henager C · Special Publication · 1977 · 53 · 371
12. 10.1016/j.conbuildmat.2018.05.22110.1016/j.conbuildmat.2018.05.221 ↗
13. 10.1016/j.engstruct.2018.06.05410.1016/j.engstruct.2018.06.054 ↗
14. Ismail MK · Magazine of Concrete Research · 2019 · 73 · 46410.1680/jmacr.19.00172 ↗
15. 10.1016/j.conbuildmat.2018.08.02410.1016/j.conbuildmat.2018.08.024 ↗
16. 10.1061/(ASCE)0733-9445(1992)118:2(341)10.1061/(ASCE)0733-9445(1992)118:2(341) ↗
17. JSCE · Concrete Engineering Series · 2008 · 82
18. 10.1016/j.cemconres.2012.02.01110.1016/j.cemconres.2012.02.011 ↗
19. 10.1016/j.compstruct.2018.05.08010.1016/j.compstruct.2018.05.080 ↗
20. 10.1016/j.conbuildmat.2017.09.04610.1016/j.conbuildmat.2017.09.046 ↗
21. 10.1680/jmacr.17.0035910.1680/jmacr.17.00359 ↗
22. 10.2208/jscej.1993.471_110.2208/jscej.1993.471_1 ↗
23. 10.1016/j.conbuildmat.2017.09.12510.1016/j.conbuildmat.2017.09.125 ↗
24. Megget L · New Zealand Engineering · 1971 · 26 · 341
25. Naaman A · 1999
26. Naaman A · 2003
27. Naaman A · 1996
28. 10.1016/j.engstruct.2019.10982610.1016/j.engstruct.2019.109826 ↗
29. 10.1061/(ASCE)0733-9445(2000)126:10(1113)10.1061/(ASCE)0733-9445(2000)126:10(1113) ↗
30. Parra-Montesinos GJ · ACI Structural Journal · 2005 · 102 · 487
31. 10.15554/pcij.01011996.64.8110.15554/pcij.01011996.64.81 ↗
32. Saghafi MH · Concrete · 2017 · 9 · 29
33. Saghafi MH · Sharif Journal of Civil Engineering · 2019
34. 10.1186/s40069-019-0334-310.1186/s40069-019-0334-3 ↗
35. 10.1016/j.istruc.2020.05.01210.1016/j.istruc.2020.05.012 ↗
36. 10.1016/j.conbuildmat.2016.01.00110.1016/j.conbuildmat.2016.01.001 ↗
37. 10.1016/j.conbuildmat.2018.07.09910.1016/j.conbuildmat.2018.07.099 ↗
38. 10.1016/j.conbuildmat.2018.11.05210.1016/j.conbuildmat.2018.11.052 ↗
39. 10.1016/j.cemconcomp.2009.09.00310.1016/j.cemconcomp.2009.09.003 ↗
40. 10.1016/j.conbuildmat.2017.05.00910.1016/j.conbuildmat.2017.05.009 ↗
41. 10.1016/j.conbuildmat.2018.01.12610.1016/j.conbuildmat.2018.01.126 ↗
42. 10.1617/s11527-012-9890-610.1617/s11527-012-9890-6 ↗
43. 10.1016/j.engstruct.2015.01.00510.1016/j.engstruct.2015.01.005 ↗