Review of factors affecting bond between ultrahigh-performance concrete and steel fibres
Source abstract
Abstract
Ultrahigh-performance concretes (UHPCs) have advantages over conventional concretes but suffer from brittleness owing to their high strength. The addition of steel fibres significantly overcomes this limitation by acting as a stress-transferring bridge between the matrix and the fibres, which enhances the durability and mechanical performance of the mix. For this review, data from several previous research studies were compiled in order to offer a comprehensive understanding of the varying factors influencing the pull-out behaviour and bonding characteristics between the UHPC matrix and steel fibres. The findings of this study revealed that deformed steel fibres embedded at 30° and 45° exhibit significantly greater loading rate sensitivity on the pull-out energy under quasi-static and seismic loading rates when compared with straight steel fibres. Compared with steel fibres with a low aspect ratio (i.e. 62.5), steel fibres with a large aspect ratio (i.e. 125) provided higher strain capacity (by 77%), energy absorption capacity (by 40%) and post-cracking strength (by 10%) under impact loading. The possible factors in the domain of fibre–matrix interactions of fibre-reinforced concrete are covered and discussed in this article.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Assistant Professor, Civil Engineering Department, COER University, Roorkee, India (corresponding author: )
Assistant Professor, Civil Engineering Department, Thapar Institute of Engineering and Technology, Patiala, India
Professor, Civil Engineering Department, COER University, Roorkee, India
References (100+)
Show source-provided references
1. 10.1007/s13369-016-2099-110.1007/s13369-016-2099-1 ↗
2. 10.1016/j.conbuildmat.2014.11.01710.1016/j.conbuildmat.2014.11.017 ↗
3. 10.1061/(ASCE)MT.1943-5533.000215410.1061/(ASCE)MT.1943-5533.0002154 ↗
4. 10.1016/j.cemconres.2017.03.00710.1016/j.cemconres.2017.03.007 ↗
5. 10.1016/j.conbuildmat.2010.06.05910.1016/j.conbuildmat.2010.06.059 ↗
6. 10.1016/j.conbuildmat.2015.06.05110.1016/j.conbuildmat.2015.06.051 ↗
7. 10.3141/2251-0710.3141/2251-07 ↗
8. 10.1016/j.conbuildmat.2011.08.04410.1016/j.conbuildmat.2011.08.044 ↗
9. 10.1016/0008-8846(82)90083-710.1016/0008-8846(82)90083-7 ↗
10. 10.1299/kikaia.66.88310.1299/kikaia.66.883 ↗
11. Aslani F · Central European Journal of Engineering · 2012 · 2 · 445
12. ASTM (1997) C1202: Standard test method for resistance of concrete to rapid freezing and thawing. ASTM International, West Conshohocken, PA, USA.
13. ASTM (2012) C1202: Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. ASTM International, West Conshohocken, PA, USA.
14. ASTM (2017) C1202: Standard test method for potential alkali reactivity of aggregates (mortar-bar method). ASTM International, West Conshohocken, PA, USA.
15. ASTM (2023) C1293: Standard test method for determination of length change of concrete due to alkali-silica reaction. ASTM International, West Conshohocken, PA, USA.
16. Banthia N · ACI Materials Journal · 2007 · 104 · 70
17. 10.1617/s11527-009-9562-310.1617/s11527-009-9562-3 ↗
18. 10.1016/0262-5075(81)90049-X10.1016/0262-5075(81)90049-X ↗
19. 10.1016/S0045-7825(00)80002-X10.1016/S0045-7825(00)80002-X ↗
20. 10.1680/macr.2005.57.8.43310.1680/macr.2005.57.8.433 ↗
21. 10.3151/jact.4.42310.3151/jact.4.423 ↗
22. 10.15554/pcij.09011999.60.7110.15554/pcij.09011999.60.71 ↗
23. 10.1617/s11527-014-0348-x10.1617/s11527-014-0348-x ↗
24. 10.2749/101686613X1362734710043710.2749/101686613X13627347100437 ↗
25. 10.1590/s1983-4195201700040001110.1590/s1983-41952017000400011 ↗
26. 10.1617/s11527-009-9527-610.1617/s11527-009-9527-6 ↗
27. 10.1016/j.compstruct.2018.06.02910.1016/j.compstruct.2018.06.029 ↗
28. Chanvillard G · Advanced Cement Based Materials · 1996 · 4 · 28
29. 10.1007/s11595-013-0679-410.1007/s11595-013-0679-4 ↗
30. 10.1016/j.cemconcomp.2011.03.00910.1016/j.cemconcomp.2011.03.009 ↗
31. 10.3390/ma1001006310.3390/ma10010063 ↗
32. 10.1061/(ASCE)MT.1943-5533.000000110.1061/(ASCE)MT.1943-5533.0000001 ↗
33. 10.1016/j.cemconres.2013.10.00210.1016/j.cemconres.2013.10.002 ↗
34. 10.1016/S0045-7825(00)00233-410.1016/S0045-7825(00)00233-4 ↗
35. Eide MB and Hisdal J-M (2012), Ultra High Performance Fibre Reinforced Concrete (UHPFRC) – State of the art: FA 2 Competitive constructions : SP 2.2 Ductile high strength concrete.
36. 10.1016/j.matdes.2009.04.02410.1016/j.matdes.2009.04.024 ↗
37. 10.1007/BF0242818810.1007/BF02428188 ↗
38. Ezeldin A · ACI Materials Journal · 1989 · 86 · 515
39. 10.1016/j.engfracmech.2006.01.02310.1016/j.engfracmech.2006.01.023 ↗
40. Fehling E (2009) Gärtnerplatz - Bridge over River Fulda in Kassel - Multispan Hybrid UHPC - Steel Bridge - 2. Advantages of UHPC for Bridge Construction First UHPC bridge projects in Germany, 1–9.
41. 10.1140/epjst/e2012-01590-610.1140/epjst/e2012-01590-6 ↗
42. 10.1016/0022-5096(93)90044-G10.1016/0022-5096(93)90044-G ↗
43. 10.1016/j.acme.2013.06.00210.1016/j.acme.2013.06.002 ↗
44. Graybeal BA (2009) Structural Behavior of a Prototype UHPC Pi-Girder. TechBrief of FHWA 06 (2009): 1–4.
45. 10.1061/(ASCE)0899-1561(2007)19:10(848)10.1061/(ASCE)0899-1561(2007)19:10(848) ↗
46. 10.1007/s11431-015-5769-410.1007/s11431-015-5769-4 ↗
47. Gumuliauskas A · 2007
48. 10.1111/j.1747-1567.1989.tb00982.x10.1111/j.1747-1567.1989.tb00982.x ↗
49. Henrik Bache H · 1987
50. 10.1016/0008-8846(95)00174-310.1016/0008-8846(95)00174-3 ↗
51. 10.1061/(ASCE)0733-9445(1990)116:3(585)10.1061/(ASCE)0733-9445(1990)116:3(585) ↗
52. 10.1016/j.cemconres.2011.05.00910.1016/j.cemconres.2011.05.009 ↗
53. 10.1016/j.conbuildmat.2011.07.00310.1016/j.conbuildmat.2011.07.003 ↗
54. 10.1515/SECM.2002.10.6.39710.1515/SECM.2002.10.6.397 ↗
55. 10.1680/macr.11.0019010.1680/macr.11.00190 ↗
56. Kazemi S · ACI Materials Journal · 2012 · 109 · 675
57. 10.1016/j.conbuildmat.2013.10.05410.1016/j.conbuildmat.2013.10.054 ↗
58. 10.1016/j.compstruct.2018.05.08010.1016/j.compstruct.2018.05.080 ↗
59. 10.1007/978-94-007-2436-5_110.1007/978-94-007-2436-5_1 ↗
60. Kumar BN · Journal on Structural Engineering · 2015 · 4 · 1
61. 10.1016/S0167-6636(00)00031-410.1016/S0167-6636(00)00031-4 ↗
62. 10.1016/j.cemconres.2010.05.00510.1016/j.cemconres.2010.05.005 ↗
63. 10.1007/BF0247955810.1007/BF02479558 ↗
64. 10.1520/STP11662S10.1520/STP11662S ↗
65. 10.1016/j.conbuildmat.2010.03.00910.1016/j.conbuildmat.2010.03.009 ↗
66. 10.1016/0010-4361(90)90005-H10.1016/0010-4361(90)90005-H ↗
67. 10.1016/j.proeng.2013.09.00410.1016/j.proeng.2013.09.004 ↗
68. 10.2495/HPSM10008110.2495/HPSM100081 ↗
69. 10.1016/j.conbuildmat.2013.07.06110.1016/j.conbuildmat.2013.07.061 ↗
70. 10.1016/j.conbuildmat.2016.05.03410.1016/j.conbuildmat.2016.05.034 ↗
71. Maya Duque LF · Materials and Structures · 2017 · 50 · 110.1617/s11527-016-0914-5 ↗
72. Mishra S · Iranian Journal of Science and Technology, Transactions of Civil Engineering · 2018 · 43 · 37110.1007/s40996-018-0196-y ↗
73. Moore BP · 2012
74. 10.1016/S0013-7944(02)00124-810.1016/S0013-7944(02)00124-8 ↗
75. 10.1016/j.conbuildmat.2018.11.24110.1016/j.conbuildmat.2018.11.241 ↗
76. 10.1016/j.compositesb.2013.10.07210.1016/j.compositesb.2013.10.072 ↗
77. Othman H · ACI Structural Journal · 2016 · 113 · 132510.14359/51689157 ↗
78. 10.1680/macr.12.0006910.1680/macr.12.00069 ↗
79. 10.1007/978-94-007-2436-510.1007/978-94-007-2436-5 ↗
80. 10.1016/j.cemconcomp.2013.12.01210.1016/j.cemconcomp.2013.12.012 ↗
81. 10.1016/j.conbuildmat.2016.08.02710.1016/j.conbuildmat.2016.08.027 ↗
82. 10.1016/j.compstruct.2016.12.02210.1016/j.compstruct.2016.12.022 ↗
83. Phani SS · Journal on Structural Engineering · 2015 · 4 · 10
84. 10.1016/0008-8846(96)00138-X10.1016/0008-8846(96)00138-X ↗
85. 10.3151/jact.8.9710.3151/jact.8.97 ↗
86. 10.1016/j.cemconres.2016.07.00310.1016/j.cemconres.2016.07.003 ↗
87. 10.1016/j.conbuildmat.2016.03.14810.1016/j.conbuildmat.2016.03.148 ↗
88. Qasrawi H · Design and Sustainability of Structural Concrete in the Middle East with Emphasis on High-Rise Buildings · 2007 · 227
89. 10.1061/(ASCE)ST.1943-541X.000170110.1061/(ASCE)ST.1943-541X.0001701 ↗
90. 10.1002/suco.20170004310.1002/suco.201700043 ↗
91. 10.1016/j.conbuildmat.2018.10.06710.1016/j.conbuildmat.2018.10.067 ↗
92. 10.1016/S0008-8846(03)00108-X10.1016/S0008-8846(03)00108-X ↗
93. Ragab KS · International Journal of Civil & Structural Engineering · 2015 · 5 · 227
94. 10.1016/j.cemconcomp.2019.10342210.1016/j.cemconcomp.2019.103422 ↗
95. Reddy MS · Journal on Civil Engineering · 2014 · 4 · 20
96. 10.1016/j.jmps.2007.08.00310.1016/j.jmps.2007.08.003 ↗
97. 10.1016/0008-8846(95)00144-210.1016/0008-8846(95)00144-2 ↗
98. Roque PE, Kim N, Kim B and Lopp G (2009) Durability of Fiber-Reinforced Concrete in Florida Environments. University of Florida, Gainesville, FL, USA.
99. 10.1243/146442005X1019310.1243/146442005X10193 ↗
100. 10.1016/j.cemconres.2004.05.04310.1016/j.cemconres.2004.05.043 ↗