Impact resistance of steel-fibre-reinforced lightweight-aggregate concrete
Source abstract
Abstract
A series of drop-weight tests have been carried out to investigate the enforcing effect of steel fibres on impact resistance of lightweight-aggregate concrete (LWC) with the drop weight test method recommended by the American Concrete Institute (ACI) Committee 544. The tested specimens were prepared as discs with size of 152 × 64 mm and five levels of volume fraction of steel fibres as 0·0%, 0·5%, 1·0%, 1·5% and 2·0% respectively. The experimental results show that the impact resistance of LWC—that is, the number of blows to first visible crack as well as to failure—can be greatly improved by including steel fibres. Moreover, it is observed that with higher volume addition, a greater improvement of impact resistance will be achieved. In view of the variation in impact resistance test results, the two-parameter Weibull distribution was adopted to analyse the test data. It is proved that the probabilistic distribution of the blows to first crack and to failure of steel-fibre-reinforced lightweight-aggregate concrete (SFLWC) can be modelled well by two-parameter Weibull distribution. Lastly, the impact resistance formulae for SFLWC with each steel fibres addition are developed to facilitate the application.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dalian University of Technology
References (20)
Show source-provided references
1. 10.1016/0141-0296(95)00158-110.1016/0141-0296(95)00158-1 ↗
2. 10.1016/0141-0296(95)00160-310.1016/0141-0296(95)00160-3 ↗
3. 10.1016/S0958-9465(01)00046-410.1016/S0958-9465(01)00046-4 ↗
4. 10.1016/S0167-577X(03)00146-010.1016/S0167-577X(03)00146-0 ↗
5. 10.1016/S0008-8846(99)00179-910.1016/S0008-8846(99)00179-9 ↗
6. 10.1016/S0958-9465(02)00141-510.1016/S0958-9465(02)00141-5 ↗
7. Zhang M. H. · ACI Materials Journal · 1991 · 88 · 240
8. 10.1016/0008-8846(95)00198-010.1016/0008-8846(95)00198-0 ↗
9. 10.1016/S0360-1323(01)00109-310.1016/S0360-1323(01)00109-3 ↗
10. 10.1016/S0958-9465(03)00047-710.1016/S0958-9465(03)00047-7 ↗
11. 10.1016/S0958-9465(02)00016-110.1016/S0958-9465(02)00016-1 ↗
12. Suaris W. · 1984 · 247
13. ACI Committee 544 · ACI Materials Journal · 1988 · 85 · 583
14. 10.1016/j.cemconres.2004.07.02110.1016/j.cemconres.2004.07.021 ↗
15. 10.1016/S0008-8846(99)00052-610.1016/S0008-8846(99)00052-6 ↗
16. 10.1680/macr.2004.56.8.43710.1680/macr.2004.56.8.437 ↗
17. Schrader E. K. · ACI Journal · 1981 · 78 · 141
18. Soroushian P. · ACI Materials Journal · 1992 · 89 · 131
19. JGJ 51-2002 · 2002
20. Singh S. P. · ACI Materials Journal · 2000 · 96 · 658