journal article·2016-12

Influence of continuity on punching resistance at edge columns

Luis Fernando S. Soares, Robert Lars Vollum

Magazine of Concrete Research· Volume 68· Issue 23
Publisher page

Abstract

The paper considers punching failure at edge columns of reinforced concrete flat slabs without shear reinforcement and unbalanced moments about an axis parallel to the slab edge. Edge column punching shear tests have been carried out on a variety of isolated and continuous specimens. The influence of eccentricity and continuity on punching resistance is assessed using existing experimental data, non-linear finite-element analysis and the critical shear crack theory as implemented in fib Model Code 2010 (MC2010). Relating punching resistance to the elastic unbalanced moment as done in MC2010 levels I to III is shown to be overly conservative for continuous slabs. The ACI 318 and Eurocode 2 practice of making the design punching resistance independent of the unbalanced moment is reviewed and shown to be reasonable, particularly for continuous slabs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Imperial College London, London, UK

CNPq – Science Without Borders, Brasília, Brazil

Department of Civil and Environmental Engineering, Imperial College London, London, UK (corresponding author: )

References (27)

Show source-provided references
1. Chen WF · 1982
2. El-Salakawy EF · Canadian Journal of Civil Engineering · 1998 · 27 · 33810.1139/l99-062 ↗
3. 10.1061/(ASCE)0733-9445(2008)134:5(859)10.1061/(ASCE)0733-9445(2008)134:5(859) ↗
4. Ghali A · ACI Structural Journal · 2015 · 112 · 50510.14359/51687707 ↗
5. Hawkins NM · 1974
6. Hordijk DA (1991) Local Approach to Fatigue of Concrete. PhD thesis, Delft University of Technology, Delft, The Netherlands.
7. ISE (The Institution of Structural Engineers) · 2006
8. MacGregor JG · 2005
9. Moehle J · ACI Structural Journal · 1988 · 85 · 89
10. Mortin JD · ACI Structural Journal · 1991 · 88 · 191
11. Muttoni A · ACI Structural Journal · 2008 · 105 · 440
12. Rangan BV · ACI Structural Journal · 1990 · 87 · 623
13. Regan PE (1981) Behaviour of Reinforced Concrete Flat Slabs. Ciria, London, UK, Ciria Report 89.
14. Regan PE · 1993
15. Regan PE · 1999
16. Regan PE, Walker PR and Zakaria KAA (1979) Test of Reinforced Concrete Flat Slabs. School of the Environment Polytechnic of Central London, London, UK, CIRIA Project RP 220
17. Sherif A, Emara MB, Hassanein A and Abul Magd S (2005) Effect of the Column Dimensions on the Punching Shear Strength of Edge Column–Slab Connections. American Concrete Institute, Farmington Hills, MI, USA, ACI Special Publication 232, Punching Shear in Reinforced Concrete Slabs, pp. 175–192.
18. Sherif AG · 2000 · 235
19. Sherif AG · ACI Structural Journal · 2000 · 97 · 455
20. 10.1680/macr.14.0043210.1680/macr.14.00432 ↗
21. 10.1680/iicep.1974.405410.1680/iicep.1974.4054 ↗
22. The Concrete Society (2007) Guide to the Design and Construction of Reinforced Concrete Flat Slabs. The Concrete Society, Camberley, UK, Technical Report 64.
23. Thorenfeldt E · 1987
24. TNO Diana · 2014
25. 10.1061/(ASCE)0733-9445(1993)119:12(3590)10.1061/(ASCE)0733-9445(1993)119:12(3590) ↗
26. Wood RH · Concrete · 1968 · 2 · 69
27. Zaghlool ERF (1971) Strength and Behavior of Corner and Edge Column–Slab Connections in Reinforced Concrete Flat Plates. PhD thesis, Department of Civil Engineering, University of Calgary, Calgary, Canada.