Permeability of high-performance concrete incorporating presoaked lightweight aggregates for internal curing
Source abstract
Abstract
This paper presents an experimental study on the effect of presoaked lightweight aggregates (LWAs) for internal curing on water permeability, water absorption and resistance of concrete to chloride-ion penetration in comparison with those of a control concrete and a concrete with shrinkage reducing admixture (SRA) of similar water/cement ratios (w/c). In general, the concretes with LWA particles had initial water absorption, sorptivity and water permeability similar to or lower than those of the control concrete and the concrete with SRA. The charges passed, chloride migration coefficient and chloride diffusion coefficient of such concretes were in the same order as those of the control concrete and the concrete with SRA. However, the incorporation of the LWAs for internal curing reduced unit weight, compressive strength and elastic modulus of the concrete. Comparing the LWAs of different sizes for internal curing, finer particles were more efficient in reducing the shrinkage and generally resulted in less reduction in the unit weight, compressive strength, and elastic modulus. However, the increase in the more porous crushed LW particles in concrete seems to increase the penetration of chloride ions in the concrete. The concrete with SRA had initial water absorption, sorptivity, water permeability and resistance to chloride ion penetration comparable with those of the control concrete. The use of SRA in concrete does not affect the elastic modulus of the concrete, except for a minor influence on the compressive strength of the concrete.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National University of Singapore
References (35)
Show source-provided references
1. AASHTO (American Association of State Highway and Transportation Officials) · 2002
2. ASTM · 2006
3. ASTM · 2006
4. ASTM · 2006
5. ASTM · 2006
6. Balayssac JP . Relations entre performances mecaniques, microstrucutre et durabilité des bétons. PhD thesis, 1992, INSA, Toulouse.
7. 10.3151/jact.4.42310.3151/jact.4.423 ↗
8. Bentz DP · 195
9. Bentz DP · Concrete International · 2005 · 27 · 35
10. Berke NS · 2003
11. BSI · 1983
12. BSI · 1988
13. BSI · 2000
14. BSI · 2000
15. BSI · 2000
16. Buyle-Bodin F · Materials and Structures/Materiaux et Constructions · 2002 · 35 · 504
17. Frederiksen JM
18. 10.1680/macr.1989.41.147.5110.1680/macr.1989.41.147.51 ↗
19. Hoff GC · 2003
20. Hooton RD · 1995 · 388
21. 10.1007/BF0248208810.1007/BF02482088 ↗
22. Lam H · 2005 · 210
23. 10.1680/macr.2003.55.6.50710.1680/macr.2003.55.6.507 ↗
24. 10.1016/S0008-8846(01)00664-010.1016/S0008-8846(01)00664-0 ↗
25. Lura P . Autogenous Deformation and Internal Curing of Concrete. PhD thesis, 2003, Delft University of Technology, Delft, Netherlands.
26. 10.1007/BF0248647310.1007/BF02486473 ↗
27. Neville AM · 1995
28. NT BUILD · 1999
29. Otsuki N · ACI Materials Journal · 1992 · 89 · 587
30. Pease BJ · 2005
31. 10.1007/BF0248635410.1007/BF02486354 ↗
32. Philleo R · 1991
33. Riding KA · ACI Materials Journal · 2008 · 105 · 390
34. Shah SP · ACI Materials Journal · 1992 · 89 · 289
35. Valenta O · 1970