journal article·2022-03

Safety factor for the Eurocode 2 punching resistance model

Jaroslav Halvonik, Lucia Majtánová, Maria Minarova

Magazine of Concrete Research· Volume 74· Issue 5
Publisher page

Abstract

This paper deals with an evaluation of the generalised partial safety factor for resistance properties by using a statistical determination of a resistance model for predicting the punching capacity. The factor takes the material, model and geometric uncertainties into account. The Eurocode 2 design model for the assessment of the punching resistance without shear reinforcement was statistically analysed using an extensive database of experimental tests. The correction factor b of the model and the coefficient of variation of the model errors were evaluated according to Annex D of EN 1990. The statistical parameters of the basic variables in the resistance functions were assumed according to the recommendations of the Joint Committee on Structural Safety Probabilistic Model Code. The comparison of the safety factors obtained with the material safety factor currently used reveals that the current factor 1.50 underestimates the values obtained for the design model analysed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Fire effects on concrete materials · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University Professor, Faculty of Civil Engineering, Slovak University of Technology, Bratislava, Slovakia (corresponding author: )

Senior Assistant, Faculty of Civil Engineering, Slovak University of Technology, Bratislava, Slovakia

Associate Professor, Faculty of Civil Engineering, Slovak University of Technology, Bratislava, Slovakia

References (23)

Show source-provided references
1. ACI (American Concrete Institute) · 2008
2. Bartlett FM · ACI Materials Journal · 1996 · 93 · 158
3. 10.1016/j.engstruct.2015.03.04310.1016/j.engstruct.2015.03.043 ↗
4. Belletti B · Magazine · 2019 · 71 · 1083
5. CEN (European Committee for Standardization) (2002) EN 1990: Eurocode: basis of structural design. CEN, Brussels, Belgium.
6. CEN (2004) EN 1992-1-1: Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings. CEN, Brussels, Belgium.
7. CEN (2013) EN 206: Concrete – specification, performance, production and conformity. CEN, Brussels, Belgium.
8. Derogar S · Structural Engineering & Mechanics · 2018 · 66 · 203
9. 10.1016/j.engstruct.2014.12.03210.1016/j.engstruct.2014.12.032 ↗
10. fib (Fédération Internationale du Béton) · 2018
11. 10.1016/j.engstruct.2019.03.05510.1016/j.engstruct.2019.03.055 ↗
12. 10.1016/j.probengmech.2015.09.00810.1016/j.probengmech.2015.09.008 ↗
13. JCSS (Joint Committee on Structural Safety) (2001) Probabilistic Model Code: Part III – resistance models. See https://www.jcss-lc.org/jcss-probabilistic-model-code/ (accessed 27/01/2021).
14. Kani GNJ · ACI Journal · 1964 · 61 · 441
15. König G · CEB Bulletin, Model Uncertainties · 1995 · 224 · 49
16. Nowak A · 2011 · 1
17. Ospina CE · Network for Earthquake Engineering Simulation (database) Dataset · 2012
18. 10.2174/187483680130701007410.2174/1874836801307010074 ↗
19. Regan PE (1987) Shear resistance of members without shear reinforcement; proposal for CEB Model Code MC90. Polytechnic of Central London, London, UK.
20. Tanner P · Hormigón y Acero · 2007 · 58 · 59
21. Thorenfeldt E · Nord Betong · 1986 · 1 · 3
22. Walraven J, Mancini G, Narayanan RS and Spehl P (2008) Commentary Eurocode 2. European Concrete Platform ASBL, Brussels, Belgium.
23. Zsutty T · ACI Journal · 1968 · 65 · 943