The Potential Biomedical Application of NiCu Magnetic Nanoparticles
Source abstract
Abstract
Magnetic nanoparticles became increasingly interesting in recent years as a result of their tailorable size-dependent properties, which enable their use in a wide range of applications. One of their emerging applications is biomedicine; in particular, bimetallic nickel/copper magnetic nanoparticles (NiCu MNPs) are gaining momentum as a consequence of their unique properties that are suitable for biomedicine. These characteristics include stability in various chemical environments, proven biocompatibility with various cell types, and tunable magnetic properties that can be adjusted by changing synthesis parameters. Despite the obvious potential of NiCu MNPs for biomedical applications, the general interest in their use for this purpose is rather low. Nevertheless, the steadily increasing annual number of related papers shows that increasingly more researchers in the biomedical field are studying this interesting formulation. As with other MNPs, NiCu-based formulations were examined for their application in magnetic hyperthermia (MH) as one of their main potential uses in clinics. MH is a treatment method in which cancer tissue is selectively heated through the localization of MNPs at the target site in an alternating magnetic field (AMF). This heating destroys cancer cells only since they are less equipped to withstand temperatures above 43 °C, whereas this temperature is not critical for healthy tissue. Superparamagnetic particles (e.g., NiCu MNPs) generate heat by relaxation losses under an AMF. In addition to MH in cancer treatment, which might be their most beneficial potential use in biomedicine, the properties of NiCu MNPs can be leveraged for several other applications, such as controlled drug delivery and prolonged localization at a desired target site in the body. After a short introduction that covers the general properties of NiCu MNPs, this review explores different synthesis methods, along with their main advantages and disadvantages, potential surface modification approaches, and their potential in biomedical applications, such as MH, multimodal cancer therapy, MH implants, antibacterial activity, and dentistry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanoparticle-Based Drug Delivery · Characterization and Applications of Magnetic Nanoparticles · Gold and Silver Nanoparticles Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Chemistry and Chemical Engineering, University of Maribor, Smetanova ulica 17, SI-2000 Maribor, Slovenia
Faculty of Medicine, Institute of Biomedical Sciences, University of Maribor, Taborska ulica 8, SI-2000 Maribor, Slovenia
Department of Pharmacology, Faculty of Medicine, University of Maribor, Taborska ulica 8, SI-2000 Maribor, Slovenia
Funding
Javna Agencija za Raziskovalno Dejavnost RS
References (100+)
Show source-provided references
1. Advanced Nanomaterials in Multimodal Imaging: Design, Functionalization, and Biomedical Applications10.1155/2010/894303 ↗
2. The preparation of magnetic nanoparticles for applications in biomedicine10.1088/0022-3727/36/13/202 ↗
3. Magnetic Nanoparticles: Synthesis, Protection, Functionalization, and Application10.1002/anie.200602866 ↗
4. Magnetic nanoparticle design for medical applications10.1016/j.progsolidstchem.2005.11.010 ↗
5. Magnetic nanoparticles for cancer therapy10.1515/ntrev-2013-0011 ↗
6. Model films from native cellulose nanofibrils. Preparation, swelling, and surface interactions10.1021/bm701317k ↗
7. Properties of mixed lipid monolayers assembled on hydrophobic surfaces through vesicle adsorption10.1021/la060688e ↗
8. Cai, W. (2014). Magnetic Nanoparticles for Biomedical Applications: From Diagnosis to Treatment to Regeneration. Engineering in Translational Medicine, Springer.10.1007/978-1-4471-4372-7 ↗
9. The Chemistry of Contrast Agents in Medical Magnetic Resonance Imaging Edited by André E. Merbach and Éva Tóth (University of Lausanne). J. Wiley & Sons: Chichester, New York, Weinheim, Brisbane, Singapore, Toronto. 2001. xii + 472 pp. $160.00. ISBN: 0-471-60778-910.1021/ja0152963 ↗
10. Functionalisation of magnetic nanoparticles for applications in biomedicine10.1088/0022-3727/36/13/203 ↗
11. Functionalized nanomaterials: Their use as contrast agents in bioimaging: Mono- and multimodal approaches10.1515/ntrev-2012-0080 ↗
12. Nonpolymeric Coatings of Iron Oxide Colloids for Biological Use as Magnetic Resonance Imaging Contrast Agents10.1006/jcis.2001.7500 ↗
13. Magnetic nanoparticles: Surface effects and properties related to biomedicine applications10.3390/ijms141121266 ↗
14. Presentation of a new magnetic field therapy system for the treatment of human solid tumors with magnetic fluid hyperthermia10.1016/S0304-8853(00)01239-7 ↗
15. Magnetic Nanoparticles: New Perspectives in Drug Delivery10.2174/1381612823666170215104659 ↗
16. Novel drug delivery system based on NiCu nanoparticles for targeting various cells10.1007/s10971-017-4513-x ↗
17. Magnetic nanomaterials for hyperthermia-based therapy and controlled drug delivery10.1016/j.addr.2011.03.008 ↗
18. Multifunctional matrices for oral peptide delivery
19. Magnetic nanoparticles and targeted drug delivering10.1016/j.phrs.2010.01.014 ↗
20. Magnetic hyperthermia with magnetic nanoparticles: A status review10.2174/1568026614666140118203550 ↗
21. Magnetic fluid hyperthermia: Focus on superparamagnetic iron oxide nanoparticles10.1016/j.cis.2011.04.003 ↗
22. Magnetic nanoparticles in MR imaging and drug delivery10.1016/j.addr.2008.03.018 ↗
23. Magnetite Nanoparticles for Medical MR Imaging10.1016/S1369-7021(11)70163-8 ↗
24. Magnetic nanoparticles for environmental and biomedical applications: A review10.1016/j.partic.2016.06.001 ↗
25. Magnetic nanoparticles and nanocomposites for remote controlled therapies10.1016/j.jconrel.2015.09.039 ↗
26. Magnetic nanoparticles for gene and drug delivery
27. Magnetic nanoparticles: Applications in gene delivery and gene therapy
28. Magnetic Nanoparticles and Biosciences10.1007/s007060200047 ↗
29. Magnetorelaxometry of magnetic nanoparticles with fluxgate magnetometers for the analysis of biological targets10.1016/j.jmmm.2005.02.045 ↗
30. Magnetorelaxometry assisting biomedical applications of magnetic nanoparticles10.1007/s11095-011-0630-3 ↗
31. Antibacterial activity of magnetic iron oxide nanoparticles synthesized by laser ablation in liquid10.1016/j.msec.2015.04.047 ↗
32. Antibacterial Efficacy of Iron-Oxide Nanoparticles against Biofilms on Different Biomaterial Surfaces10.1155/2014/716080 ↗
33. Medical application of functionalized magnetic nanoparticles10.1263/jbb.100.1 ↗
34. Superparamagnetic iron oxide nanoparticle-based delivery systems for biotherapeutics10.1517/17425247.2013.747507 ↗
35. The application of magnetic nanoparticles in the treatment and monitoring of cancer and infectious diseases
36. Synthesis of copper–nickel nanoparticles prepared by mechanical milling for use in magnetic hyperthermia10.1016/j.jmmm.2011.04.004 ↗
37. Synthesis and characterization of Ni–Cu alloy nanoparticles with a tunable Curie temperature10.1016/j.jallcom.2015.06.067 ↗
38. Local radiofrequency-induced hyperthermia using CuNi nanoparticles with therapeutically suitable Curie temperature10.1016/j.jmmm.2006.11.199 ↗
39. Cytotoxicity Evaluation and Magnetic Characteristics of Mechano-thermally Synthesized CuNi Nanoparticles for Hyperthermia10.1007/s11665-015-1398-0 ↗
40. The synthesis and characterization of nickel–copper alloy nanoparticles with a narrow size distribution using sol–gel synthesis10.1016/j.matlet.2014.03.030 ↗
41. Preparation of ultra-fine copper–nickel bimetallic powders with hydrothermal–reduction method10.1016/j.matchemphys.2007.04.027 ↗
42. Preparation of Cu–Ni alloy nanocrystallites in water-in-oil microemulsions10.1016/j.jcis.2005.06.071 ↗
43. Physical limits of hyperthermia using magnetite fine particles10.1109/20.718537 ↗
44. Magnetic fluid hyperthermia (MFH): Cancer treatment with AC magnetic field induced excitation of biocompatible superparamagnetic nanoparticles10.1016/S0304-8853(99)00088-8 ↗
45. Biologically Targeted Magnetic Hyperthermia: Potential and Limitations10.3389/fphar.2018.00831 ↗
46. Andra, W., and Nowak, H. (2007). Magnetism in Medicine: A Handbook, Wiley-VCH. [2nd ed.].10.1002/9783527610174 ↗
47. Synthesis and characterization of polymer encapsulated Cu–Ni magnetic nanoparticles for hyperthermia applications10.1016/j.jmmm.2005.02.024 ↗
48. Physically synthesized Ni-Cu nanoparticles for magnetic hyperthermia10.1186/1477-044X-2-4 ↗
49. Corrosion analysis of NiCu and PdCo thermal seed alloys used as interstitial hyperthermia implants10.1016/S0142-9612(97)00102-6 ↗
50. Structural effects on the magnetic hyperthermia properties of iron oxide nanoparticles10.1016/j.pnsc.2016.09.004 ↗
51. Combining Bulk Temperature and Nanoheating Enables Advanced Magnetic Fluid Hyperthermia Efficacy on Pancreatic Tumor Cells10.1038/s41598-018-31553-9 ↗
52. Experimental estimation and analysis of variance of the measured loss power of magnetic nanoparticles10.1038/s41598-017-07088-w ↗
53. Nonharmonic Driving Fields for Enhancement of Nanoparticle Heating Efficiency in Magnetic Hyperthermia10.1103/PhysRevApplied.12.034041 ↗
54. Synthesis of Ni–Cu Particles by Hydrogen Reduction in Hot-compressed Water10.1246/cl.2006.50 ↗
55. Preparation of α-Fe2O3 nanoparticles by high-energy ball milling10.1016/j.physb.2006.07.043 ↗
56. Surfactant Assisted Ball Milling: A Simple Top down Approach for the Synthesis of Controlled Structure Nanoparticle10.4028/www.scientific.net/AMR.832.356 ↗
57. Cu–Ni materials prepared by mechanical milling: Their properties and electrocatalytic activity towards nitrate reduction in alkaline medium10.1016/j.jallcom.2006.06.023 ↗
58. Highly efficient silica coated CuNi bimetallic nanocatalyst from reverse microemulsion10.1016/j.jcis.2016.12.043 ↗
59. Bimetallic Cu–Ni nanoparticles of varying composition (CuNi3, CuNi, Cu3Ni)10.1016/j.colsurfa.2008.08.007 ↗
60. Stergar, J., Ban, I., Drofenik, M., Ferk, G., and Makovec, D. (2012). Synthesis and Characterization of Silica-Coated Cu1−xNix Nanoparticles, Institute of Electrical and Electronics Engineers.10.1109/TMAG.2011.2173168 ↗
61. Positive microemulsion synthesis and magnetic property of amorphous multicomponent Co-, Ni- and Cu-based alloy nanoparticles10.1016/j.colsurfa.2007.12.041 ↗
62. Sol-gel Encapsulation of Biomolecules and Cells for Medicinal Applications10.2174/1568026614666141229112734 ↗
63. Brinker, C.J., and Scherer, G.W. (1990). Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing, Academic Press.
64. Magnetic properties of Ni and Ni–Cu nanoparticles10.1002/pssb.201248152 ↗
65. Polyol synthesis, functionalisation, and biocompatibility studies of superparamagnetic iron oxide nanoparticles as potential MRI contrast agents10.1039/C5NR03867G ↗
66. Single Step Synthesis of Amino-Functionalized Magnetic Nanoparticles with Polyol Technique at Low Temperature10.5402/2011/483129 ↗
67. Selective Nucleation and Growth of Cu and Ni Core/Shell Nanoparticles10.1021/cm1004032 ↗
68. Synthesis and characterization of bimetallic Ni–Cu particles10.1016/S0022-4596(02)00163-9 ↗
69. Saji, V.S., and Cook, R. (2012). 5—Electrodeposition: The versatile technique for nanomaterials. Corrosion Protection and Control Using Nanomaterials, Woodhead Publishing.10.1533/9780857095800 ↗
70. Double template electrochemical deposition and characterization of NiCo and NiCu alloys nanoparticles and nanofilms10.1007/s10008-007-0332-2 ↗
71. Xu, R., and Xu, Y. (2017). Chapter 4—Hydrothermal and Solvothermal Syntheses. Modern Inorganic Synthetic Chemistry, Elsevier. [2nd ed.].
72. Preparation of ultra fine copper–nickel bimetallic powders for conductive thick film10.1016/j.intermet.2007.04.001 ↗
73. Properties of powders produced by electrical explosions of copper–nickel alloy wires10.1016/j.matlet.2006.11.047 ↗
74. Nickel and Nickel-Based Nanoalloy Thin Films from Alcohol-Assisted Chemical Vapor Deposition10.1021/cm902454w ↗
75. Composition-dependent sintering behaviour of chemically synthesised CuNi nanoparticles and their application in aerosol printing for preparation of conductive microstructures10.1007/s00396-012-2612-3 ↗
76. Characterization of Cu–Ni alloy electrodeposition and synthesis of nanoparticles by pulsed sonoelectrochemistry10.1016/j.matchemphys.2013.12.028 ↗
77. Cu–Ni nanoalloy phase diagram—Prediction and experiment10.1016/j.calphad.2013.11.004 ↗
78. Preparation and structural characterization of CuNi nanoalloys obtained by polymeric precursor method10.1016/j.matlet.2012.09.063 ↗
79. The synthesis and characterization of copper–nickel alloy nanoparticles with a therapeutic Curie point using the microemulsion method10.1016/j.jallcom.2013.04.130 ↗
80. NiCu magnetic nanoparticles: Review of synthesis methods, surface functionalization approaches, and biomedical applications10.1515/ntrev-2017-0193 ↗
81. Synthesis, Functionalization, and Biomedical Applications of Multifunctional Magnetic Nanoparticles10.1002/adma.201000260 ↗
82. Synthesis of Fe3O4/PMMA Nanocomposite Particles by Surface-Initiated ATRP and Characterization
83. In situ synthesis and magnetic studies of iron oxide nanoparticles in calcium-alginate matrix for biomedical applications10.1016/j.msec.2006.12.016 ↗
84. PEG-functionalized magnetic nanoparticles for drug delivery and magnetic resonance imaging applications10.1007/s11095-010-0260-1 ↗
85. Starch-Coated Superparamagnetic Nanoparticles as MR Contrast Agents10.1021/cm031104m ↗
86. Kinetics of adsorption of Saccharomyces cerevisiae mandelated dehydrogenase on magnetic Fe3O4–chitosan nanoparticles10.1016/j.colsurfa.2008.01.017 ↗
87. Synthesis and Characterization of Pullulan Acetate Coated Magnetic Nanoparticle for Hyperthermic Therapy10.1016/j.mspro.2015.06.017 ↗
88. Dextran and albumin derivatised iron oxide nanoparticles: Influence on fibroblasts in vitro10.1016/S0142-9612(03)00237-0 ↗
89. Encapsulation of Fe3O4 in gelatin nanoparticles: Effect of different parameters on size and stability of the colloidal dispersion10.1080/02652040701737697 ↗
90. Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications10.1016/j.biomaterials.2004.10.012 ↗
91. Water dispersible oleic acid-coated Fe3O4 nanoparticles for biomedical applications10.1016/j.jmmm.2014.10.137 ↗
92. Gold coated magnetic nanoparticles: From preparation to surface modification for analytical and biomedical applications10.1039/C6CC03225G ↗
93. Martínez-González, R., Estelrich, J., and Busquets, M.A. (2016). Liposomes Loaded with Hydrophobic Iron Oxide Nanoparticles: Suitable T2 Contrast Agents for MRI. Int. J. Mol. Sci., 17.10.3390/ijms17081209 ↗
94. Lipid-coated iron oxide nanoparticles for dual-modal imaging of hepatocellular carcinoma10.2147/IJN.S128525 ↗
95. Formulation of novel lipid-coated magnetic nanoparticles as the probe for in vivo imaging10.1186/1423-0127-16-86 ↗
96. Peptide conjugated magnetic nanoparticles for magnetically mediated energy delivery to lung cancer cells10.2217/nnm-2016-0050 ↗
97. Magnetic Nanoparticle−Peptide Conjugates for in Vitro and in Vivo Targeting and Extraction of Cancer Cells10.1021/ja801969b ↗
98. Polymer-Assisted Chain-like Organization of CuNi Alloy Nanoparticles: Solvent-Adoptable Pseudohomogeneous Catalysts for Alkyne–Azide Click Reactions with Magnetic Recyclability10.1021/jp5071874 ↗
99. Nanoparticles of Ni1−xCux alloys for enhanced heating in magnetic hyperthermia10.1016/j.jallcom.2019.02.148 ↗
100. CuxNi1−x alloy nanoparticles embedded SiO2 films: Synthesis and structure10.1007/s11051-010-0033-0 ↗