Influence of bagasse ash and recycled concrete aggregate on hardened properties of high-strength concrete
Source abstract
Abstract
This research aimed to use of bagasse ash as a cement replacement in high-strength recycled aggregate concrete (HS-RAC). Crushed limestone was replaced with 100% recycled concrete aggregate (RCA) and the ground bagasse ash (GBA) was used to partially replace ordinary Portland cement (OPC) at 20, 35 and 50%wt of binder to cast HS-RAC. The results indicated that the replacing of crushed limestone with RCA had a negative impact on the properties of the concrete. Increasing the amount of GBA in HS-RAC resulted in a decrease in density and an increase in the volume of permeable pore space. The concrete mixtures prepared with 20%wt GBA replacement of OPC promoted greater the compressive strength than the conventional concrete (CT concrete) at 90 days or more. HS-RAC with GBA (up to 50%) was more durable in terms of chloride ion penetration resistance, although it had lower compressive strength than the CT concrete.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. 1. Sata, V.; Jaturapitakkul, C.; Kiattikomol, K. (2007) Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete. Constr. Build. Mater. 21 [7], 1589–1598.10.1016/j.conbuildmat.2005.09.011 ↗
2. 2. Nath, P.; Sarker, P. (2011) Effect of Fly Ash on the Durability Properties of High Strength Concrete. Procedia Eng. 14, 1149–1156.10.1016/j.proeng.2011.07.144 ↗
3. 3. Tangchirapat, W.; Jaturapitakkul, C.; Chindaprasirt, P. (2009) Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete. Constr. Build. Mater. 23 [7], 2641–2646.10.1016/j.conbuildmat.2009.01.008 ↗
4. 4. Katz, A. (2003) Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cement Concrete Res. 33 [5], 703–711.10.1016/S0008-8846(02)01033-5 ↗
5. 5. Prince, M.J.R.; Singh, B. (2013) Bond behaviour of deformed steel bars embedded in recycled aggregate concrete. Constr. Build. Mater. 49, 852–862. .10.1016/j.conbuildmat.2013.08.031 ↗
6. 6. Evangelista, L.; de Brito, J. (2010) Durability performance of concrete made with fine recycled concrete aggregates. Cem. Concr. Comp. 32 [1], 9–14.10.1016/j.cemconcomp.2009.09.005 ↗
7. 2. Haitao, Y.; Shizhu, T. (2015) Preparation and properties of high-strength recycled concrete in cold areas. Mater. Construcc. 65 [318], e050.10.3989/mc.2015.03214 ↗
8. 8. Srubar Iii, W.V. (2015) Stochastic service-life modeling of chloride-induced corrosion in recycled-aggregate concrete. Cem. Concr. Comp. 55, 103–111.10.1016/j.cemconcomp.2014.09.003 ↗
9. 9. Fernández-Ledesma, E.; Jiménez, J.R.; Ayuso, J.; Corinaldesi, V.; Iglesias-Godino, F.J. (2016) A proposal for the maximum use of recycled concrete sand in masonry mortar design. Mater. Construcc. 66 [321] e075.10.3989/mc.2016.08414 ↗
10. 10. González-Taboada, I.; González-Fonteboa, B.; Martínez-Abella, F.; Carro-López, D. (2016) Study of recycled concrete aggregate quality and its relationship with recycled concrete compressive strength using database analysis. Mater. Construcc. 66 [323], e089.10.3989/mc.2016.06415 ↗
11. 11. Padmini, A.K.; Ramamurthy, K.; Mathews, M.S. (2009) Influence of parent concrete on the properties of recycled aggregate concrete. Constr. Build. Mater. 23 [2], 829–836.10.1016/j.conbuildmat.2008.03.006 ↗
12. 12. Purushothaman, R.; Amirthavalli, R.R.; Karan, L. (2015) Influence of Treatment Methods on the Strength and Performance Characteristics of Recycled Aggregate Concrete. J. Mater. Civ. Eng. 27 [5], 04014168.10.1061/(ASCE)MT.1943-5533.0001128 ↗
13. 13. Sánchez-Roldán, Z.; Martín-Morales, M.; Valverde-Palacios, I.; Valverde-Espinosa, I.; Zamorano, M. (2016) Study of potential advantages of pre-soaking on the properties of pre-cast concrete made with recycled coarse aggregate. Mater. Construcc. 66 [321], e076.10.3989/mc.2016.01715 ↗
14. 14. Tam, V.W.Y.; Gao, X.F.; Tam, C.M. (2006) Comparing performance of modified two-stage mixing approach for producing recycled aggregate concrete. Mag Concrete. Res. 58 [7], 477–484.10.1680/macr.2006.58.7.477 ↗
15. 15. Limbachiya, M.; Meddah, M.S.; Ouchagour, Y. (2012) Use of recycled concrete aggregate in fly-ash concrete. Constr. Build. Mater. 27 [1], 439–449.
16. 16. Kroehong, W.; Damrongwiriyanupap, N.; Sinsiri, T.; Jaturapitakkul, C. (2016) The Effect of Palm Oil Fuel Ash as a Supplementary Cementitious Material on Chloride Penetration and Microstructure of Blended Cement Paste. Arab. J. Sci. Eng. 41 [12], 4799–4808.10.1007/s13369-016-2143-1 ↗
17. 17. Chindaprasirt, P.; Chotithanorm, C.; Cao, H.T.; Sirivivatnanon, V. (2007) Influence of fly ash fineness on the chloride penetration of concrete. Constr. Build. Mater. 21 [2], 356–361.10.1016/j.conbuildmat.2005.08.010 ↗
18. 18. Gastaldini, A.L.G.; da Silva, M.P.; Zamberlan, F.B.; Mostardeiro Neto, C.Z. (2014) Total shrinkage, chloride penetration, and compressive strength of concretes that contain clear-colored rice husk ash. Constr. Build. Mater. 54, 369–377.10.1016/j.conbuildmat.2013.12.044 ↗
19. 19. Awal, A.S.M.A.; Shehu, I.A. (2013) Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash. Fuel. 105, 728–731.10.1016/j.fuel.2012.10.020 ↗
20. 20. Chalee, W.; Ausapanit, P.; Jaturapitakkul, C. (2010) Utilization of fly ash concrete in marine environment for long term design life analysis. Mater. Des. 31 [3], 1242–1249.10.1016/j.matdes.2009.09.024 ↗
21. 21. Cordeiro, G.C.; Toledo Filho, R.D.; Tavares, L.M.; Fairbairn, E.M.R. (2008) Pozzolanic activity and filler effect of sugar cane bagasse ash in Portland cement and lime mortars. Cement. Concrete. Comp. 30 [5], 410–418.10.1016/j.cemconcomp.2008.01.001 ↗
22. 22. Martirena Hernández, J.F.; Middendorf, B.; Gehrke, M.; Budelmann, H. (1998) Use of wastes of the sugar industry as pozzolana in lime-pozzolana binders: study of the reaction. Cement. Concrete. Res. 28 [11], 1525–1536.10.1016/S0008-8846(98)00130-6 ↗
23. 23. Chusilp, N.; Jaturapitakkul, C.; Kiattikomol, K. (2009) Utilization of bagasse ash as a pozzolanic material in concrete. Constr. Build. Mater. 23 [11], 3352–3358.10.1016/j.conbuildmat.2009.06.030 ↗
24. 24. Rukzon, S.; Chindaprasirt, P. (2012) Utilization of bagasse ash in high-strength concrete. Mater. Des. 34, 45–50.10.1016/j.matdes.2011.07.045 ↗
25. 25. Chusilp, N.; Jaturapitakkul, C.; Kiattikomol, K. (2009) Effects of LOI of ground bagasse ash on the compressive strength and sulfate resistance of mortars. Constr. Build. Mater. 23 [12], 3523–3531.10.1016/j.conbuildmat.2009.06.046 ↗
26. 26. Rerkpiboon, A.; Tangchirapat, W.; Jaturapitakkul, C. (2015) Strength, chloride resistance, and expansion of concretes containing ground bagasse ash. Constr. Build. Mater. 101, Part 1, 983–989.10.1016/j.conbuildmat.2015.10.140 ↗
27. 13. ASTM C33/C33M. (2013) Standard specification for concrete aggregates. ASTM International. West Conshohocken. PA.
28. 14. ASTM C494/C494M. (2013) Standard specification for chemical admixtures for concrete. ASTM International. West Conshohocken. PA.
29. 15. ASTM C642. (2013) Standard test method for density, absorption, and voids in hardened concrete. ASTM International. West Conshohocken. PA.
30. 16. ASTM C39/C39M. (2015) Standard test method for compressive strength of cylindrical concrete specimens. ASTM International. West Conshohocken. PA.
31. 17. NT Build 492. (1999) Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady-state migration experiments. Nordtest Building Method. Espoo. FL.
32. 18. AASHTO TP64-03. (2007) Standard method of test for predicting chloride penetration of hydraulic cement concrete by the rapid migration procedure. American Association of State Highway and Transportation Officials, Washington, D.C.
33. 33. Otsuki, N.; Miyazato, S.I.; Yodsudjai, W. (2003) Influence of Recycled Aggregate on Interfacial Transition Zone, Strength, Chloride Penetration and Carbonation of Concrete. J. Mater. Civ. Eng. 15 [5], 443–451.10.1061/(ASCE)0899-1561(2003)15:5(443) ↗
34. 34. Safiuddin, M.; Alengaram, U.J.; Rahman, M.M.; Salam, M.A.; Jumaat, M.Z. (2013) Use of recycled concrete aggregate in concrete: a review. J. Civ. Eng. Manag. 19 [6], 796–810.10.3846/13923730.2013.799093 ↗
35. 35. Khoshkenari, A.G.; Shafigh, P.; Moghimi, M.; Mahmud, H.B. (2014) The role of 0–2 mm fine recycled concrete aggregate on the compressive and splitting tensile strengths of recycled concrete aggregate concrete. Mater. Des. 64, 345–354.10.1016/j.matdes.2014.07.048 ↗
36. 36. Siddique, R.; Singh, K.; Kunal; Singh, M.; Corinaldesi, V.; Rajor, A. (2016) Properties of bacterial rice husk ash concrete. Constr. Build. Mater. 121, 112–119.10.1016/j.conbuildmat.2016.05.146 ↗
37. 37. Wongkeo, W.; Thongsanitgarn, P.; Ngamjarurojana, A.; Chaipanich, A. (2014) Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume. Mater. Des. 64, 261–269.10.1016/j.matdes.2014.07.042 ↗
38. 38. Li, T.; Xiao, J.; Zhu, C. (2016) Hydration process modeling of ITZ between new and old cement paste. Constr. Build. Mater. 109, 120–127.10.1016/j.conbuildmat.2016.01.053 ↗
39. 39. Kong, D.; Lei, T.; Zheng, J.; Ma, C.; Jiang, J.; Jiang, J. (2010) Effect and mechanism of surface-coating pozzalanics materials around aggregate on properties and ITZ microstructure of recycled aggregate concrete. Constr. Build. Mater. 24 [5], 701–708.10.1016/j.conbuildmat.2009.10.038 ↗
40. 40. Poon, C.S.; Shui, Z.H.; Lam, L. (2004) Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates. Constr. Build. Mater. 18 [6], 461–468.10.1016/j.conbuildmat.2004.03.005 ↗
41. 41. López Gayarre, F.; López-Colina Pérez, C.; Serrano López, M.A.; Domingo Cabo, A. (2014) The effect of curing conditions on the compressive strength of recycled aggregate concrete. Constr. Build. Mater. 53, 260–266.10.1016/j.conbuildmat.2013.11.112 ↗
42. 42. Ajdukiewicz, A.; Kliszczewicz, A. (2002) Influence of recycled aggregates on mechanical properties of HS/HPC. Cement. Concrete. Comp. 24 [2], 269–279.10.1016/S0958-9465(01)00012-9 ↗
43. 43. Lam, L.; Wong, Y.L.; Poon, C.S. (2000) Degree of hydration and gel/space ratio of high-volume fly ash/cement systems. Cement Concrete Res. 30 [5], 747–756.10.1016/S0008-8846(00)00213-1 ↗
44. 24. ?avija, B.; Lukovic´, M.; Schlangen, E. (2014) Lattice modeling of rapid chloride migration in concrete. Cement Concrete Res. 61–62, 49–63.
45. 45. Jensen, H.U.; Pratt, P.L. (1989) The binding of chloride ions by pozzolanic product in fly ash cement blends. Adv. Cem. Res. 2 [7], 121–129.10.1680/adcr.1989.2.7.121 ↗
46. 46. Sumranwanich, T.; Tangtermsirikul, S. (2004) A model for predicting time-dependent chloride binding capacity of cement-fly ash cementitious system. Mater. Struct. 37 [6], 387–396.10.1007/BF02479635 ↗
47. 47. Ying, J.; Xiao, J.; Meng, Q. (2016) On Probability Distribution of Chloride Diffusion Coefficient for Recycled Aggregate Concrete. Int. J. Concr. Struct. Mater. 10 [1], 61–73.10.1007/s40069-015-0123-6 ↗
48. 48. Jain, J.; Neithalath, N. (2011) Electrical impedance analysis based quantification of microstructural changes in concretes due to non-steady state chloride migration. Mater. Chem. Phys. 129 [1–2], 569–579.10.1016/j.matchemphys.2011.04.057 ↗
49. 25. ACI 363R. (2010) Report on high-strength concrete. American Concrete Institute. Farmington Hills. Michigan.