journal article·2017-05-08Open access

A New Energy-Critical Plane Damage Parameter for Multiaxial Fatigue Life Prediction of Turbine Blades

Zheng-Yong Yu, Shun-Peng Zhu, Qiang Liu, Yunhan Liu

Materials· Volume 10· Issue 5

Abstract

As one of fracture critical components of an aircraft engine, accurate life prediction of a turbine blade to disk attachment is significant for ensuring the engine structural integrity and reliability. Fatigue failure of a turbine blade is often caused under multiaxial cyclic loadings at high temperatures. In this paper, considering different failure types, a new energy-critical plane damage parameter is proposed for multiaxial fatigue life prediction, and no extra fitted material constants will be needed for practical applications. Moreover, three multiaxial models with maximum damage parameters on the critical plane are evaluated under tension-compression and tension-torsion loadings. Experimental data of GH4169 under proportional and non-proportional fatigue loadings and a case study of a turbine disk-blade contact system are introduced for model validation. Results show that model predictions by Wang-Brown (WB) and Fatemi-Socie (FS) models with maximum damage parameters are conservative and acceptable. For the turbine disk-blade contact system, both of the proposed damage parameters and Smith-Watson-Topper (SWT) model show reasonably acceptable correlations with its field number of flight cycles. However, life estimations of the turbine blade reveal that the definition of the maximum damage parameter is not reasonable for the WB model but effective for both the FS and SWT models.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Probabilistic and Robust Engineering Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for System Reliability & Safety, University of Electronic Science and Technology of China, Chengdu 611731, China

References (56)

Show source-provided references
1. An investigation of fatigue failures of turbine blades in a gas turbine engine by mechanical analysis10.1016/S1350-6307(01)00005-X ↗
2. Failure analysis of two sets of aircraft blades10.1016/j.engfailanal.2008.10.015 ↗
3. Creep-fatigue life prediction and interaction diagram in nickel-based GH4169 superalloy at 650 °C based on cycle-by-cycle concept10.1016/j.ijfatigue.2016.11.021 ↗
4. The effects of inhomogeneous microstructure and loading waveform on creep-fatigue behaviour in a forged and precipitation hardened nickel-based superalloy10.1016/j.ijfatigue.2017.01.002 ↗
5. A unified criterion for fatigue-creep life prediction of high temperature components10.1177/0954410016641448 ↗
6. Combined fatigue experiments on full scale turbine components10.1108/00022661311294085 ↗
7. Experimental investigation of fatigue crack growth behavior of GH2036 under combined high and low cycle fatigue10.1016/j.ijfatigue.2015.10.027 ↗
8. Sinclair, G.B., and Cormier, N.G. (1999, January 7–10). Contact stresses in dovetail attachments: Finite element modeling. Proceedings of the ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, IN, USA.
9. Tao, C., Zhong, P., and Li, R.Z. (2000). Failure Analysis and Prevention for Rotor in Aero-Engine, National Defence Industry Press.
10. Probabilistic physics of failure-based framework for fatigue life prediction of aircraft gas turbine discs under uncertainty10.1016/j.ress.2015.10.002 ↗
11. A generalized energy-based fatigue-creep damage parameter for life prediction of turbine disk alloys10.1016/j.engfracmech.2012.04.021 ↗
12. Failure analysis of Ti6Al4V gas turbine compressor blades10.1016/j.engfailanal.2007.11.018 ↗
13. A fracture mechanics life prediction methodology applied to dovetail fretting10.1016/j.triboint.2006.02.006 ↗
14. Power-exponent function model for low-cycle fatigue life prediction and its applications–Part II: Life prediction of turbine blades under creep-fatigue interaction10.1016/j.ijfatigue.2006.03.005 ↗
15. A Critical plane to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
16. A path-independent parameter for fatigue under proportional and non-proportional loading10.1111/j.1460-2695.1993.tb00739.x ↗
17. Pineau, A., Cailletaud, G., and Lindley, T.C. (1996). Multiaxial random load fatigue: Life prediction techniques and experiments. Multiaxial Fatigue and Design, ESIS 21, Mechanical Engineering.
18. A stress-strain function for the fatigue of metals
19. A theory for fatigue under multiaxial stress-strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
20. Multiaxial fatigue life prediction for titanium alloy TC4 under proportional and nonproportional loading10.1016/j.ijfatigue.2013.08.028 ↗
21. Evaluation of multiaxial fatigue life prediction criteria for PEEK10.1016/j.tafmec.2014.07.012 ↗
22. Multiaxial effects on LCF behaviour and fatigue failure of AZ31B magnesium extrusion10.1016/j.ijfatigue.2014.01.025 ↗
23. A fatigue model for sensitive materials to non-proportional loadings10.1016/j.ijfatigue.2015.06.009 ↗
24. Jiang, Y., and Sehitoglu, H. (1992). Fatigue and Stress Analysis of Rolling Contact, College of Engineering, University of Illinois at Urbana-Champaign.
25. Fatigue of 7075-T651 aluminum alloy10.1016/j.ijfatigue.2007.07.005 ↗
26. Ince, A. (2017). A mean stress correction model for tensile and compressive mean stress fatigue loadings. Fatigue Fract. Eng. Mater. Struct., in press.10.1111/ffe.12553 ↗
27. Zhu, S.P., Lei, Q., and Wang, Q.Y. (2017). Mean stress and ratcheting corrections in fatigue life prediction of metals. Fatigue Fract. Eng. Mater. Struct., in press.10.1111/ffe.12569 ↗
28. Zhu, S.P., Lei, Q., and Huang, H.Z. (2016). Mean stress effect correction in strain energy-based fatigue life prediction of metals. Int. J. Damage Mech., in press.10.1177/1056789516651920 ↗
29. A generalized fatigue damage parameter for multiaxial fatigue life prediction under proportional and non-proportional loadings10.1016/j.ijfatigue.2013.10.007 ↗
30. Probabilistic formulation of the multiaxial fatigue damage of Liu10.1016/j.ijfatigue.2010.10.003 ↗
31. Generalized probabilistic model allowing for various fatigue damage variables10.1016/j.ijfatigue.2017.03.031 ↗
32. A probabilistic analysis of Miner’s law for different loading conditions10.12989/sem.2016.60.1.071 ↗
33. Castillo, E., and Alfonso, F.-C. (2009). A Unified Statistical Methodology for Modeling Fatigue Damage, Springer Science & Business Media.
34. Probabilistic modeling of damage accumulation for time-dependent fatigue reliability analysis of railway axle steels10.1177/0954409713496772 ↗
35. A probabilistic model for the high cycle fatigue behaviour of cast aluminium alloys subject to complex loads10.1016/j.ijfatigue.2012.08.004 ↗
36. Bonnand, V., Chaboche, J.L., and Cherouali, H. (2010, January 7–9). Investigation of multiaxial fatigue in the prospect of turbine disc applications: Part II-Fatigue criteria analysis and formulation of a new combined one. Proceedings of the ICMFF9, Parma, Italy.
37. Effect of hardness on multiaxial fatigue behaviour and some simple approximations for steels10.1111/j.1460-2695.2009.01369.x ↗
38. Bannantine, J.A., and Socie, D.F. (1989, January 3–6). A variable amplitude multiaxial fatigue life prediction method. Proceedings of the Third International Conference on Biaxial/Multiaxial Fatigue, Stuttgart, Germany.
39. Fatigue life under non-Gaussian random loading from various models10.1016/j.ijfatigue.2003.08.017 ↗
40. Wei, H., and Liu, Y. (2017). A critical plane-energy model for multiaxial fatigue life prediction. Fatigue Fract. Eng. Mater. Struct., in press.10.1111/ffe.12614 ↗
41. Kandil, F.A., Brown, M.W., and Miller, K.J. (1982). Biaxial low-cycle fatigue failure of 316 stainless steel at elevated temperatures. Mechanical Behaviour and Nuclear Applications of Stainless Steel at Elevated Temperatures, Maney Pub.
42. Liu, K.C. (1993). A method based on virtual strain-energy parameters for multiaxial fatigue life prediction. Advances in Multiaxial Fatigue, ASTM International.10.1520/STP24796S ↗
43. A multiaxial fatigue strain energy density parameter related to the critical fracture plane10.1111/j.1460-2695.1995.tb00140.x ↗
44. Mean stress effects in multiaxial fatigue10.1111/j.1460-2695.1995.tb00901.x ↗
45. Chu, C.C., Conle, F.A., and Bonnen, J.J.F. (1993). Multiaxial stress-strain modeling and fatigue life prediction of SAE axle shafts. Advances in Multiaxial Fatigue, ASTM International.10.1520/STP24794S ↗
46. Ramberg, W., and Osgood, W.R. (1943). Description of Stress-Strain Curves by Three Parameters.
47. Constitutive equations for cyclic plasticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
48. Zhao, G.P., and Zhao, B.K. (2002). China Aeronautical Materials Handbook.
49. Multiaxial fatigue damage parameter and life prediction under low cycle loading for GH4169 alloy and other structural materials10.1016/j.ijfatigue.2009.12.007 ↗
50. Multiaxial high-cycle fatigue criteria and life prediction: Application to gas turbine blade10.1016/j.ijfatigue.2016.06.024 ↗
51. Multiaxial fatigue life prediction for various metallic materials based on the critical plane approach10.1016/j.ijfatigue.2010.07.003 ↗
52. The Modified Manson-Coffin Curve Method to estimate fatigue lifetime under complex constant and variable amplitude multiaxial fatigue loading10.1016/j.ijfatigue.2015.10.005 ↗
53. Castro, F., and Jiang, Y. (2017). Fatigue of extruded AZ31B magnesium alloy under stress-and strain-controlled conditions including step loading. Mech. Mater., in press.10.1016/j.mechmat.2017.03.002 ↗
54. Comparison of fretting fatigue crack nucleation experiments to multiaxial fatigue theory life predictions
55. Fracture mechanisms and life assessment under high strain-biaxial cyclic loading of type 304 stainless steel10.1111/j.1460-2695.1989.tb00515.x ↗
56. Socie, D., and Marquis, G. (1999). Multiaxial Fatigue, Society of Automotive Engineers.10.4271/R-234 ↗