Greener Nanocomposite Polyurethane Foam Based on Sustainable Polyol and Natural Fillers: Investigation of Chemico-Physical and Mechanical Properties
Source abstract
Abstract
Nowadays, the chemical industry is looking for sustainable chemicals to synthesize nanocomposite bio-based polyurethane foams, PUs, with the aim to replace the conventional petrochemical precursors. Some possibilities to increase the environmental sustainability in the synthesis of nanocomposite PUs include the use of chemicals and additives derived from renewable sources (such as vegetable oils or biomass wastes), which comprise increasingly wider base raw materials. Generally, sustainable PUs exhibit chemico-physical, mechanical and functional properties, which are not comparable with those of PUs produced from petrochemical precursors. In order to enhance the performances, as well as the bio-based aspect, the addition in the polyurethane formulation of renewable or natural fillers can be considered. Among these, walnut shells and cellulose are very popular wood-based waste, and due to their chemical composition, carbohydrate, protein and/or fatty acid, can be used as reactive fillers in the synthesis of Pus. Diatomite, as a natural inorganic nanoporous filler, can also be evaluated to improve mechanical and thermal insulation properties of rigid PUs. In this respect, sustainable nanocomposite rigid PU foams are synthesized by using a cardanol-based Mannich polyol, MDI (Methylene diphenyl isocyanate) as an isocyanate source, catalysts and surfactant to regulate the polymerization and blowing reactions, H2O as a sustainable blowing agent and a suitable amount (5 wt%) of ultramilled walnut shell, cellulose and diatomite as filler. The effect of these fillers on the chemico-physical, morphological, mechanical and functional performances on PU foams has been analyzed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer composites and self-healing · Lignin and Wood Chemistry · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Polymers, Composites and Biomaterials-CNR, 80055 Portici (NA), Italy
AEP Polymers Srl, 34149 Basovizza, Trieste, Italy
Institute for Chemical Science and Technologies -CNR, 20133 Milano, Italy
Funding
H2020-BBI-JTI-2017(BIO BASED INDUSTRIES PP9
References (44)
Show source-provided references
1. Anastas, P.T., and Warner, J.C. (1998). Green Chemistry, Theory and Practice, Oxford University Press.
2. A Sustainable Process for the Production of Varnishes Based on Pelargonic Acid Esters10.1002/aocs.12200 ↗
3. Life-cycle assessment and techno-economic analysis of the utilization of bio-oil components for the production of three chemicals10.1039/C8GC01181H ↗
4. Chemicals from lignocellulosic biomass: Opportunities, perspectives, and potential of biorefinery systems10.1002/bbb.297 ↗
5. Cheng, H.N., Gross, R.A., and Smith, P.B. (2018). Green Polymer Chemistry: New Products, Processes, and Applications, American Chemical Society.10.1021/bk-2018-1310 ↗
6. A comprehensive review on biodiesel as an alternative energy resource and its characteristics10.1016/j.rser.2012.01.003 ↗
7. Polyurethane types, synthesis and applications—A review10.1039/C6RA14525F ↗
8. Polyurethane networks based on polycaprolactone and hyperbranched polyester: Structural, thermal and mechanical investigation10.1016/j.porgcoat.2019.105305 ↗
9. Bio-based routes to synthesize cyclic carbonates and polyamines precursors of non–isocyanate polyurethanes: A review10.1016/j.eurpolymj.2019.06.032 ↗
10. Synthesis and characterization of sustainable polyurethane foams based on polyhydroxyls with different terminal groups10.1016/j.polymer.2018.06.077 ↗
11. Hydration-induced reinforcement of rigid polyurethane-cement foams: Mechanical and functional properties10.1007/s10853-012-6642-5 ↗
12. Polyurethane-silica hybrid foam by sol-gel approach: Chemical and functional properties10.1016/j.polymer.2014.10.017 ↗
13. Rigid Polyurethane Foams from Cardanol: Synthesis, Structural Characterization, and Evaluation of Polyol and Foam Properties10.1021/sc300079z ↗
14. Synthesis, Structure, and Properties of Novel Polyols from Cardanol and Developed Polyurethanes10.1021/ie0488750 ↗
15. Effect of hard segments content on the properties, structure and biodegradation of non-isocyanate polyurethane10.1177/0967391118809196 ↗
16. A perspective approach to sustainable routes for non-isocyanate polyurethanes10.1016/j.eurpolymj.2016.11.027 ↗
17. From the Synthesis of Biobased Cyclic Carbonate to Polyhydroxyurethanes: A Promising Route towards Renewable Non-Isocyanate Polyurethanes10.1002/cssc.201900737 ↗
18. Queirós, C.S.G.P., Cardoso, S., Lourenço, A., Ferreira, J., Miranda, I., Lourenço, M.J.V., and Pereira, H. (2019). Characterization of walnut, almond, and pine nut shells regarding chemical composition and extract composition. Biomass Convers. Biorefin., 1–14.10.1007/s13399-019-00424-2 ↗
19. Cellulose: Fascinating Biopolymer and Sustainable Raw Material10.1002/anie.200460587 ↗
20. Diatom silica, an emerging biomaterial for energy conversion and storage10.1039/C7TA02045G ↗
21. Plyushch, A., Zhai, T., Xia, H., Santillo, C., Verdolotti, L., Lavorgna, M., and Kuzhir, P. (2019). Ultra-light reduced graphene oxide based aerogel/foam absorber of microwave radiation. Materials, 12.10.3390/ma12020213 ↗
22. Permeation grouting of a fine-grained pyroclastic soil10.1680/grim.2006.10.4.135 ↗
23. A 2-dimensional small-angle X-ray scattering study of the microphase-separated morphology exhibited by thermoplastic polyurethanes and its response to deformation10.1016/j.polymer.2004.05.032 ↗
24. Urea hard segment morphology in flexible polyurethane foam10.1002/(SICI)1099-0488(199803)36:4<573::AID-POLB4>3.0.CO;2-Q ↗
25. Small-angle X-ray scattering studies of microdomain structure in segmented polyurethane elastomers10.1002/pol.1983.180210814 ↗
26. A Synchrotron SAXS Study of Structure Development Kinetics during the Reactive Processing of Flexible Polyurethane Foam10.1021/ma00097a024 ↗
27. The Influence of Hard-Segments on Two-Phase Structure and Shape Memory Properties of PCL-Based Segmented Polyurethanes10.1002/polb.20974 ↗
28. Thermoplastic polyurethane films reinforced with carbon nanotubes: The effect of processing on the structure and mechanical properties10.1016/j.eurpolymj.2012.11.008 ↗
29. Processing of polyurethane/carbon nanotubes composites using novel minimixer10.1179/174328910X12777566997496 ↗
30. Hyperbranched polyester as a crosslinker in polyurethane formation: Real-time monitoring using in situ FTIR10.1007/s00289-016-1629-z ↗
31. Probing the urea hard domain connectivity in segmented, non-chain extended polyureas using hydrogen-bond screening agents10.1016/j.polymer.2007.10.046 ↗
32. High bio-content polyurethane (PU) foam made from bio-polyol and cellulose nanocrystals (CNCs) via microwave liquefaction10.1016/j.matdes.2017.10.058 ↗
33. Capasso, I., Liguori, B., Verdolotti, L., Caputo, D., Lavorgna, M., Tervoort, E., and Studart, A.R. (2020). Process strategy to fabricate a hierarchical porosity gradient in diatomite-based foams by 3D printing. Sci. Rep.10.1038/s41598-019-55582-0 ↗
34. On revealing the effect of alkaline lignin and ammonium polyphosphate additives on fire retardant properties of sustainable zein-based composites10.1016/j.polymdegradstab.2016.10.001 ↗
35. Dielectric Properties of Sustainable Nanocomposites based on Zein Protein and Lignin as biodegradable insulators10.1002/adfm.201605142 ↗
36. Peculiarities in the structure—Properties relationship of epoxy-silica hybrids with highly organic siloxane domains10.1016/j.polymer.2015.03.012 ↗
37. Gibson, L.J., and Ashby, M.F. (2001). Cellular Solids—Structure and Properties, Cambridge University Press. [2nd ed.].
38. The mechanical properties of cellular solids10.1007/BF02645546 ↗
39. The mechanics of two-dimensional cellular materials10.1098/rspa.1982.0087 ↗
40. Polyurethane composites synthesized using natural oil-based polyols and sisal fibers10.7569/JRM.2017.634163 ↗
41. Rigid polyurethane foams with halogen-free flame retardants: Thermal insulation, mechanical, and flame retardant properties
42. Basalt waste management in the production of highly effective porous polyurethane composites for thermal insulating applications10.1016/j.polymertesting.2019.02.008 ↗
43. Fractionation and oxypropylation of corn-stover lignin for the production of biobased rigid polyurethane foam10.1016/j.indcrop.2019.111887 ↗
44. Tannin-Based Biofoams-A Review10.32604/jrm.2019.06511 ↗