journal article·2023-07-28Open access

The Flexural Strength Prediction of Carbon Fiber/Epoxy Composite Using Artificial Neural Network Approach

Veena Phunpeng, Karunamit Saensuriwong, Thongchart Kerdphol, Pichitra Uangpairoj

Materials· Volume 16· Issue 15

Abstract

There is a developing demand for natural resources because of the growing population. Alternative materials have been developed to address these shortages, concentrating on characteristics such as durability and lightness. By researching composite materials, natural materials can be replaced. It is vital to consider the mechanical properties of composite materials when selecting them for a specific application. This study aims to measure the flexural strength of carbon fiber/epoxy composites. However, the cost of forming these composites is relatively high, given the expense of composite materials. Consequently, this study seeks to reduce molding costs by predicting flexural strength. Conducting many tests for each case is costly; therefore, it is necessary to discover an economical method. To accomplish this, the flexural strength of carbon fiber/epoxy composites was investigated using an artificial neural network (ANN) technique to reduce the expense of material testing. The output parameter investigated was flexural strength, while input parameters included ply orientation, manufacturing, width, thickness, and graphite filler percentage. The scope alternative was determined by identifying the values of variables that substantially affect the flexural strength. The prediction of flexural strength was deemed acceptable if the mean squared error (MSE) value was less than 0.001, and the coefficient of determination (R2) was greater than or equal to 0.95. The obtained results demonstrated an MSE of 0.003039 and an R2 value of 0.95274, indicating a low prediction error and high prediction accuracy for all flexural strength data. Thus, the outcomes of this study provide accurate predictions of flexural strength in the composite materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites · Fire Detection and Safety Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Institute of Engineering, Suranaree University of Technology, 111 Maha Witthayalai Rd., Suranaree Sub-District, Mueang Nakhon Ratchasima District, Nakhon Ratchasima 30000, Thailand

Department of Electrical Engineering, Faculty of Engineering, Kasetsart University, 50 Ngamwongwan Rd., Chatuchak, Bangkok 10900, Thailand

Funding

Suranaree University of Technology, Thailand Science Research and Innovation (TSRI) · NRIIS

References (50)

Show source-provided references
1. Organic-inorganic nanocomposites with completely defined interfacial interactions10.1002/1521-4095(200106)13:11<800::AID-ADMA800>3.0.CO;2-G ↗
2. Novel nanocomposites based on epoxy resin/epoxy-functionalized polydimethylsiloxane reinforced with POSS10.1016/j.compositesb.2015.01.043 ↗
3. Bio-based Epoxy Resins from Epoxidized Plant Oils and Their Shape Memory Behaviors10.1007/s11746-016-2907-5 ↗
4. Adhesive properties of poly (methyl silsesquioxanes)/bio-based epoxy nanocomposites10.1007/s13726-020-00849-x ↗
5. Composite materials for biomedical applications: A review
6. Mechanical properties of carbon/glass fiber reinforced epoxy hybrid polymer composites
7. Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement10.1016/j.scriptamat.2006.12.038 ↗
8. Mechanical and thermal properties improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates10.1177/0954008313507961 ↗
9. Analysis and Performance of Fiber Composites
10. Effect of carbon fiber orientation and helix angle on CFRP cutting characteristics by end-milling10.20965/ijat.2013.p0292 ↗
11. Optimal design of composite plates with discrete variable stiffness10.1016/j.compstruct.2012.11.015 ↗
12. Strain-based delamination prediction in fatigue loaded CFRP coupon specimens by deep learning and static loading data10.1016/j.compositesb.2022.110020 ↗
13. Mechanical properties of carbon/glass fiber reinforced polymer plates with sandwich structure exposed to freezing-thawing environment: Effects of water immersion, bending loading and fiber hybrid mode10.1080/15376494.2021.2024927 ↗
14. A review of non-destructive testing methods of composite materials10.1016/j.prostr.2016.02.008 ↗
15. From aviation to aviation: Environmental and financial viability of closed-loop recycling of carbon fibre composite10.1016/j.compositesb.2020.108362 ↗
16. Mixed finite element formulations for strain-gradient elasticity problems using the FEniCS environment10.1016/j.finel.2014.11.002 ↗
17. Pelleg, J. (2013). Mechanical Properties of Materials, Springer.10.1007/978-94-007-4342-7 ↗
18. Low thermal cycling effects on mechanical properties of laminated composite materials10.1016/j.mechmat.2016.01.012 ↗
19. Effects of variation in autoclave pressure, temperature, and vacuum-application time on porosity and mechanical properties of a carbon fiber/epoxy composite
20. Phunpeng, V., Saensuriwong, K., and Kerdphol, T. (2022). Comparative Manufacturing of Hybrid Composites with Waste Graphite Fillers for UAVs. Materials, 15.10.3390/ma15196840 ↗
21. Experimental manufacturing of glass fiber composites considering flexural behaviour10.12928/si.v19i2.21658 ↗
22. Laboratory Study of Polypropylene-Based Honeycomb Core for Sandwich Composites10.12928/si.v19i2.21659 ↗
23. Leather-like composite materials prepared from natural rubber and two leather wastes: Wet blue leather and finished leather10.1177/00952443221130472 ↗
24. Production of carbon black acrylic composite as an electrophotographic toner using emulsion aggregation method: Investigation the effect of agitation rate10.1016/j.compositesb.2013.08.076 ↗
25. Small-signal analysis of multiple virtual synchronous machines to enhance frequency stability of grid-connected high renewables10.1049/gtd2.12101 ↗
26. Phunpeng, V., and Kerdphol, T. (2021, January 20–23). Comparative study of Sugeno and Mamdani fuzzy inference systems for virtual inertia emulation. Proceedings of the 8th Annual IEEE PES/IAS PowerAfrica, Nairobi, Kenya.10.1109/PowerAfrica52236.2021.9543337 ↗
27. Fatigue life prediction of composite materials using polynomial classifiers and recurrent neural networks10.1016/j.compstruct.2005.08.012 ↗
28. Artificial neural networks in spectrum fatigue life prediction of composite materials10.1016/j.ijfatigue.2006.03.004 ↗
29. Predicting properties of High Performance Concrete containing composite cementitious materials using Artificial Neural Networks10.1016/j.autcon.2011.11.011 ↗
30. Application of Artificial Neural Networks to predict fibre orientation in long fibre compression moulded composite materials10.1016/j.compscitech.2020.108034 ↗
31. Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning10.1016/j.cma.2019.01.005 ↗
32. Dropout Prediction in MOOCs: Using Deep Learning for Personalized Intervention10.1177/0735633118757015 ↗
33. A deep learning approach to network intrusion detection using deep autoencoder
34. Deep Learning Approach for Intelligent Intrusion Detection System10.1109/ACCESS.2019.2895334 ↗
35. Sentiment analysis using deep learning approaches: An overview10.1007/s11432-018-9941-6 ↗
36. Optimal filler content for cotton fiber/PP composite based on mechanical properties using artificial neural network10.1016/j.compstruct.2020.112654 ↗
37. Development and strength prediction of sustainable concrete having binary and ternary cementitious blends and incorporating recycled aggregates from demolished UAE buildings: Experimental and machine learning-based studies10.1016/j.conbuildmat.2023.131278 ↗
38. Effects of fishing rope strength on the severity of large whale entanglements10.1111/cobi.12590 ↗
39. Abushanab, A., Wakjira, T.G., and Alnahhal, W. (2023). Machine Learning-Based Flexural Capacity Prediction of Corroded RC Beams with an Efficient and User-Friendly Tool. Sustainability, 15.10.3390/su15064824 ↗
40. Impact of correlation of plug load data, occupancy rates and local weather conditions on electricity consumption in a building using four back-propagation neural network models10.1016/j.scs.2020.102321 ↗
41. Feng, J., Wang, W., and Li, J. (2018). An LM-BP neural network approach to estimate monthly-mean daily global solar radiation using MODIS atmospheric products. Energies, 11.10.3390/en11123510 ↗
42. Christou, V., Arjmand, A., Dimopoulos, D., Varvarousis, D., Tsoulos, I., Tzallas, A.T., Gogos, C., Tsipouras, M.G., Glavas, E., and Ploumis, A. (2022). Automatic Hemiplegia Type Detection (Right or Left) Using the Levenberg-Marquardt Backpropagation Method. Information, 13.10.3390/info13020101 ↗
43. (1970). Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (Standard No. ASTM D790-02).
44. Application of multiple linear regression, central composite design, and ANFIS models in dye concentration measurement and prediction using plastic optical fiber sensor10.1016/j.measurement.2015.06.019 ↗
45. Pudza, M.Y., Abidin, Z.Z., Rashid, S.A., Yasin, F.M., Noor, A.S.M., and Issa, M.A. (2019). Sustainable synthesis processes for carbon dots through response surface methodology and artificial neural network. Processes, 7.10.3390/pr7100704 ↗
46. FAI: Fast, accurate, and intelligent approach and prediction tool for flexural capacity of FRP-RC beams based on super-learner machine learning model10.1016/j.mtcomm.2022.104461 ↗
47. Pasupa, K. (2020). Advance Intelligence Systems: Theory, Algorithms, and Applications, King Mongkut’s Institute of Technology Ladkrabang.
48. Comparison of Mechanical Properties of Epoxy Composites Reinforced with Stitched Glass and Carbon Fabrics: Characterization of Mechanical Anisotropy in Composites and Investigation on the Interaction Between Fiber and Epoxy Matrix
49. Mechanical properties of carbon fiber/epoxy composites: Effects of number of plies, fiber contents, and angle-ply layers10.1002/pen.23820 ↗
50. Effect of fiber orientation on carbon/epoxy and glass/epoxy composites subjected to shear and bending10.4028/www.scientific.net/SSP.267.103 ↗