journal article·2024-08-27Open access

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Chang-Rong Song, Si-Yu Zhang, Lin Liu, Hong-Yu Yang, Jie Kang, Jia Meng, Chang-Jie Luo, Cheng-Gang Wang, Kuang Cao, Jian Qiao, Shi-Li Shu, Ming Zhu, Feng Qiu, Qi-Chuan Jiang

Materials· Volume 17· Issue 17

Abstract

Al-Mg alloys are widely used as important engineering structural materials in aerospace engineering, transportation systems, and structural constructions due to their low density, high specific strength, corrosion resistance, welding capability, fatigue strength, and cost-effectiveness. However, the conventional Al-Mg alloys can no longer fully satisfy the demands of practical production due to difficulties caused by many defects. The high strength of Al-Mg alloys as non-heat treatment precipitation-strengthened alloys is achieved primarily by solid solution strengthening along with work hardening rather than precipitation strengthening. Therefore, severe plastic deformation (SPD) techniques can be often used to produce ultrafine-grained structures to fabricate ultra-high strength aluminum alloys. However, this approach often achieves the strengthening of material at the cost of reduced ductility. This paper comprehensively summarizes the various approaches of ultrafine/nanocrystalline materials for enhancing their plasticity, elaborates on the creation of a bimodal microstructure within the alloy, and discusses the formation of a nanotwin microstructure within the alloy and the incorporation of dispersed nanoparticles. The mechanisms underlying both the strengthening and toughening during large plastic deformation in aluminum alloys are summarized, and the future research direction of high-performance ultrafine crystalline and nanocrystalline Al-Mg aluminum alloys is prospected.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Automobile Materials, Ministry of Education and Department of Materials Science and Engineering, Jilin University, Renmin Street No. 5988, Changchun 130025, China

United Automotive Electronic Systems Limited Company, Rongqiao Street No. 555, Pudong New Area, Shanghai 201206, China

Jilin Liyuan Precision Manufacturing Co., Ltd., No. 5729, Xi’ning Road, Economic Development Zone, Liaoyuan 136299, China

Department and Test Center, FAW—Volkswagen Automotive Co., Ltd., Changchun 130011, China

Cansinga Technology Co., Ltd., Building D, Central Avenue, Bao’an District, Shenzhen 518101, China

Technology Research and Development Casting & Forging Research Institute, FAW Foundry Co., Ltd., Crossing of Hexie Street & Bingwu Road Automotive Industry Development Zone, Changchun 130013, China

Jiangsu Dalishen Aluminum Industry Co., Ltd., No. 8 Shengchang West Road, Economic Development Zone, Zhenjiang 212314, China

School of Mechatronic Engineering and Automation, Foshan University, No. 33 Guangyun Road, Nanhai District, Foshan 528231, China

School of Mechanical and Aerospace Engineering, Jilin University, Renmin Street No. 5988, Changchun 130025, China

Zhenjiang Xianfeng Automotive Parts Co., Ltd., Dantu High Tech Industrial Park, Zhenjiang 212000, China

Funding

Science and Technology Development Program of Jilin Province, China · undergraduate Innovation Fund of Jilin University, China

References (100+)

Show source-provided references
1. Application of modern aluminum alloys to aircraft10.1016/0376-0421(95)00004-6 ↗
2. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
3. Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation10.1016/j.actamat.2007.06.043 ↗
4. Solute-defect interactions in Al-Mg alloys from diffusive variational Gaussian calculations10.1103/PhysRevB.90.174102 ↗
5. Impurity effect of Mg on the generalized planar fault energy of Al10.1007/s10853-016-9834-6 ↗
6. Effect of pre-deformation on the microstructures and properties of 2219 aluminum alloy during aging treatment10.1016/j.jallcom.2016.12.006 ↗
7. Controlling the textures of the Al alloy sheet via dissimilar channel angular pressing10.1016/j.msea.2004.11.058 ↗
8. Scaling up of equal-channel angular pressing and its effect on mechanical properties, microstructure, and hot workability of AA 606110.1016/j.msea.2005.08.023 ↗
9. Effect of hot and cold deformation on the β fiber rolling texture in continuous cast AA 5052 aluminum alloy10.1016/j.scriptamat.2005.02.031 ↗
10. Effect of hot and cold deformation on the recrystallization texture of continuous cast AA 5052 aluminum alloy10.1016/j.scriptamat.2005.07.040 ↗
11. Effect of cold rolling on microstructure and material properties of 5052 alloy sheet produced by continuous casting10.1016/j.msea.2005.12.008 ↗
12. Lowe, T.C., Zhu, Y.T., Semiatin, S.L., and Berg, D.R. (2000). Overview and Outlook for Materials Processed by Severe Plastic Deformation. Investigations and Applications of Severe Plastic Deformation, Springer.10.1007/978-94-011-4062-1_45 ↗
13. Structure and properties of ultrafine-grained materials produced by severe plastic deformation10.1016/0921-5093(93)90717-S ↗
14. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
15. Commercialization of Nanostructured Metals Produced by Severe Plastic Deformation Processing10.1002/adem.200310076 ↗
16. Nanostructured materials: Basic concepts and microstructure10.1016/S1359-6454(99)00285-2 ↗
17. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
18. Development of a multi-pass facility for equal-channel angular pressing to high total strains10.1016/S0921-5093(99)00744-3 ↗
19. Gleiter, H. (1991). Nanocrystalline Materials. Advanced Structural and Functional Materials, Springer.10.1007/978-3-642-49261-7_1 ↗
20. Sabirov, I., Enikeev, N.A., Murashkin, M.Y., and Valiev, R.Z. (2015). Nanostructures in Materials Subjected to Severe Plastic Deformation. Bulk Nanostruct Mater with Multifunct Prop, Springer.10.1007/978-3-319-19599-5_2 ↗
21. Deformation twinning in bulk nanocrystalline metals: Experimental observations10.1007/s11837-008-0120-1 ↗
22. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
23. Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review10.1016/j.jallcom.2024.174667 ↗
24. Nanocrystalline materials—Current research and future directions10.1023/A:1011026900989 ↗
25. Evaluation of the tribological properties of an Al–Mg–Si alloy processed by severe plastic deformation10.1016/j.wear.2010.12.082 ↗
26. 7—Severe plastic deformation and the production of nanostructured alloys by machining10.1533/9780857091123.1.178 ↗
27. Microstructure and strengthening mechanism of Al-1.5% Mg single-phase alloy by recovery annealing
28. Microstructure and tensile properties of bulk nanostructured Al-5083/SiCp composites prepared by cryomilling10.1016/j.msea.2005.07.056 ↗
29. Cryomilling: An environment friendly approach of preparation large quantity ultra refined pure aluminium nanoparticles10.1016/j.jmrt.2017.05.017 ↗
30. An improved thermo-mechanical treatment of high-strength Al–Zn–Mg–Cu alloy for effective grain refinement and ductility modification10.1016/j.jmatprotec.2016.08.027 ↗
31. Three strategies to achieve uniform tensile deformation in a nanostructured metal10.1016/j.actamat.2003.12.022 ↗
32. Annealing behaviour of ultrafine-grained aluminium10.1080/14786435.2013.856526 ↗
33. Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions10.1016/S0921-5093(98)01136-8 ↗
34. Excellent high strain rate superplasticity of Al-Mg-Sc-Zr alloy sheet produced by an improved asymmetrical rolling process10.1016/j.jallcom.2017.04.273 ↗
35. Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloy10.1016/j.msea.2012.01.041 ↗
36. High strain rate superplasticity in an Al–Mg–Sc–Zr alloy processed via simple rolling10.1016/j.msea.2017.01.091 ↗
37. Effect of Sc and Zr additions on grain stability and superplasticity of the simple thermal–mechanical processed Al–Zn–Mg alloy sheet10.1016/j.msea.2015.09.049 ↗
38. Superplastic behavior and microstructure evolution of a new Al-Mg-Sc-Zr alloy subjected to a simple thermomechanical processing10.1016/j.msea.2016.05.086 ↗
39. Superplasticity of friction-stir welded Al–Mg–Sc sheets with ultrafine-grained microstructure10.1016/j.msea.2015.09.106 ↗
40. Grain Boundary Segregation in UFG Alloys Processed by Severe Plastic Deformation10.1002/adem.201200060 ↗
41. Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys10.1080/21663831.2019.1601644 ↗
42. Stability criteria for nanocrystalline alloys10.1016/j.actamat.2017.03.029 ↗
43. Microstructure, superplasticity, and mechanical properties of Al–Mg–Er–Zr alloys10.1016/j.matchar.2022.111825 ↗
44. Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion10.1016/j.matchar.2017.11.023 ↗
45. Examining the microhardness evolution and thermal stability of an Al–Mg–Sc alloy processed by high-pressure torsion at a high temperature10.1016/j.jmrt.2017.05.008 ↗
46. Using high-pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
47. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
48. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
49. Microstructure behavior of Al–Mg–Sc alloy processed by ECAP at elevated temperature10.1016/j.actamat.2007.10.029 ↗
50. On achieving ultra-high strength and improved wear resistance in Al–Zn–Mg alloy via ECAP10.1016/j.triboint.2021.107188 ↗
51. EBSD study of the microstructure texture evolution in an Al–Si–Cu alloy processed by route, A ECAP10.1016/j.jallcom.2020.157651 ↗
52. Thermal Stability and S-Phase Evolution in Ultrafine-Grained Al−Mg−Li Alloy Produced by Equal-Channel Angular Pressing10.1002/adem.202100181 ↗
53. Structure and Properties of Al Mg alloy Processed by Equal Channel Angular pressing at different channel angles—90o, 120o10.1016/j.matpr.2018.06.558 ↗
54. Influence of the Accumulative Roll. Bonding Process Severity on the Microstructure and Superplastic Behaviour of 7075 Al Alloy10.1016/j.jmst.2016.06.004 ↗
55. Novel ultra-high straining process for bulk materials—Development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
56. Effect of stacking fault energy on nanostructure formation under accumulative roll bonding (ARB) process10.1016/j.msea.2013.04.090 ↗
57. Extreme grain refinement by severe plastic deformation: A wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
58. Grain refinement of Mg–Al–Zn alloys via accumulative roll bonding10.1016/j.scriptamat.2004.07.028 ↗
59. Effect of concurrent accumulative roll bonding (ARB) process and various heat treatment on the microstructure, texture and mechanical properties of AA1050 sheets10.1016/j.jmrt.2022.03.001 ↗
60. Fatigue-induced microstructure evolution and ratcheting behavior of ultrafine-grained (UFG) pure aluminum processed by accumulative roll bonding (ARB)10.1016/j.matchar.2022.112578 ↗
61. Formation of nanograined structure and decomposition of supersaturated solid solution during high pressure torsion of Al–Zn and Al–Mg alloys10.1016/j.actamat.2004.06.006 ↗
62. Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion10.1016/j.msea.2004.11.007 ↗
63. Kumar, H., Devade, K., Pratap Singh, D., Mohan Giri, J., Kumar, M., and Arun, V. (Mater. Today Proc., 2023). Severe plastic deformation: A state of art, Mater. Today Proc., in press.10.1016/j.matpr.2023.02.194 ↗
64. Nano-structuring of a high entropy alloy by severe plastic deformation: Experiments and crystal plasticity simulations10.1016/j.actamat.2023.118814 ↗
65. The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion10.1016/j.actamat.2008.06.036 ↗
66. Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion10.1016/j.scriptamat.2018.09.033 ↗
67. Structure and mechanical properties of nanostructured Al–Mg alloys processed by severe plastic deformation10.1007/s10853-012-7133-4 ↗
68. Concurrent strengthening of ultrafine-grained age-hardenable Al-Mg alloy by means of high-pressure torsion and spinodal decomposition10.1016/j.actamat.2017.04.002 ↗
69. Corrosion behavior of Al–3Mg–0.2Sc alloy processed by high-pressure torsion and thermal treated10.1016/j.jmrt.2022.03.054 ↗
70. Microstructure evolution and dislocation configurations in nanostructured Al–Mg alloys processed by high pressure torsion10.1016/S1003-6326(14)63542-1 ↗
71. Using Severe Plastic Deformation to Produce Nanostructured Materials with Superior Properties10.1146/annurev-matsci-081720-123248 ↗
72. Microstructural characteristics of an ultrafine grain metal processed with equal-channel angular pressing10.1016/S1044-5803(96)00131-3 ↗
73. A numerical modelling and investigations of flow stress and grain refinement during equal-channel angular pressing10.1016/S1359-6462(01)00796-5 ↗
74. Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness10.1016/j.actamat.2005.07.010 ↗
75. Grain boundary statistics in nano-structured iron produced by high pressure torsion10.1016/j.msea.2004.08.071 ↗
76. Influence of temperature and hydrostatic pressure during equal-channel angular pressing on the microstructure of commercial-purity Ti10.1016/j.msea.2004.01.137 ↗
77. Shear bands in cyclically deformed ultrafine grained copper processed by ECAP10.1016/j.msea.2003.12.087 ↗
78. The effect of equal-channel angular pressing on the structure and mechanical behavior of Ti–6Al–4V alloy10.1016/j.msea.2004.02.093 ↗
79. The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion10.1016/S1359-6454(03)00419-1 ↗
80. Equal channel angular extrusion: From macromechanics to structure formation10.1016/S0921-5093(99)00248-8 ↗
81. Slip line solutions, deformation mode and loading history during equal channel angular extrusion10.1016/S0921-5093(02)00258-7 ↗
82. Engineering and commercialization of equal channel angular extrusion (ECAE)10.1016/S0921-5093(04)00934-7 ↗
83. Mechanics of continuous equal-channel angular extrusion10.1016/j.jmatprotec.2009.11.001 ↗
84. Effect of ECAP on microstructure, mechanical and tribological properties of aluminum and brass alloys: A review10.1016/j.matpr.2020.02.497 ↗
85. Microstructure evolution, mechanical property response and strengthening mechanism induced by compositional effects in Al–6 Mg alloys10.1016/j.matdes.2022.110849 ↗
86. Microstructure and mechanical properties of severely deformed Al-Mg-Sc-Zr alloy and their evolution during annealing10.1016/j.msea.2018.12.063 ↗
87. Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
88. High ductility bulk nanostructured Al–Mg binary alloy processed by equal channel angular pressing and inter-pass annealing10.1016/j.scriptamat.2015.04.018 ↗
89. Microstructure and mechanical properties of Al–xMg alloys processed by room temperature ECAP10.1016/j.msea.2012.03.012 ↗
90. Ultrafine-grained microstructures evolving during severe plastic deformation10.1007/s11837-000-0129-6 ↗
91. The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE10.1016/S1359-6454(99)00388-2 ↗
92. The process of grain refinement in equal-channel angular pressing10.1016/S1359-6454(97)00494-1 ↗
93. Optimizing the rotation conditions for grain refinement in equal-channel angular pressing10.1007/s11661-998-0027-z ↗
94. Influence of pressing temperature on microstructural development in equal-channel angular pressing10.1016/S0921-5093(00)00836-4 ↗
95. Effect of pressing temperature on microstructure and tensile behavior of low carbon steels processed by equal channel angular pressing10.1016/S0921-5093(01)01395-8 ↗
96. Effects of equal channel angular pressing temperature on deformation structures of pure Ti10.1016/S0921-5093(02)00318-0 ↗
97. Influence of pressing speed on microstructural development in equal-channel angular pressing10.1007/s11661-999-0009-9 ↗
98. Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing10.1016/S1359-6454(02)00200-8 ↗
99. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗
100. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗