article·2025-05-24Open access

Corrosion Resistance and Wear Behavior of Ni60/TiC and NbC Composite Coatings Prepared by Laser Cladding

Qiang Zhan, Fangyan Luo, Jiang Huang, Zhanshan Wang, Bin Ma, Chengpu Liu

Abstract

This research delves into the corrosion resistance and wear behavior of Ni60-based composite coatings strengthened by TiC and NbC particles, which are produced by laser cladding. Three distinct coatings were prepared: S1 (Ni60 + 20%TiC), S2 (Ni60 + 10%TiC + 10%NbC), and S3 (Ni60 + 20%NbC). Microstructural characterization revealed that the addition of TiC and NbC altered phase composition, inducing lattice distortion and promoting the formation of carbides such as Cr7C3, Ni3C, and Nb2C. The S2 coating exhibited the highest average microhardness (1045 HV) due to synergistic grain refinement and homogeneous carbide dispersion. Wear resistance followed the order S2 > S3 > S1, attributed to the optimized balance of hard-phase distribution and reduced abrasive wear. Electrochemical tests in 3.5 wt% NaCl solution demonstrated superior corrosion resistance for S3, characterized by the lowest corrosion current density (1.732 × 10−6 A/cm2) and a stable passivation film, facilitated by NbC-induced oxide formation. While S2 achieved peak mechanical performance, S3 excelled in corrosion resistance, highlighting the trade-off between carbide reinforcement and electrochemical stability. This work underscores the potential of tailoring dual-carbide systems in Ni60 coatings to enhance durability in harsh environments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.