Functionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing
Source abstract
Abstract
The modern medical industry successfully utilizes Laser Powder Bed Fusion (LPBF) to manufacture complex custom implants. Ti6Al4V is one of the most commonly used biocompatible alloys. In surgery practice, infection at the bone–implant interface is one of the key reasons for implant failure. Therefore, advanced implants with biocompatibility and antibacterial properties are required. Modification of Ti alloy with Cu, which in small concentrations is a proven non-toxic antibacterial agent, is an attractive way to manufacture implants with embedded antibacterial functionality. The possibility of achieving alloying in situ, during manufacturing, is a unique option of the LPBF technology. It provides unique opportunities to manufacture customized implant shapes and design new alloys. Nevertheless, optimal process parameters need to be established for the in situ alloyed materials to form dense parts with required mechanical properties. This research is dedicated to an investigation of Ti6Al4V (ELI)-1 at % Cu material, manufactured by LPBF from a mixture of Ti6Al4V (ELI) and pure Cu powders. The effect of process parameters on surface roughness, chemical composition and distribution of Cu was investigated. Chemical homogeneity was discussed in relation to differences in the viscosity and density of molten Cu and Ti6Al4V. Microstructure, mechanical properties, and fracture behavior of as-built 3D samples were analyzed and discussed. Pilot antibacterial functionalization testing of Ti6Al4V (ELI) in situ alloyed with 1 at % Cu showed promising results and notable reduction in the growth of pure cultures of Escherichia coli and Staphylococcus aureus.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering and Physics, Karlstad University, 651 88 Karlstad, Sweden
Department of Mechanical and Mechatronic Engineering, Central University of Technology, Free State, Private Bag X20539, Bloemfontein 9300, South Africa
Centre for Applied Food Security and –Biotechnology (CAFSaB), Central University of Technology, Free State, Private Bag X20539, Bloemfontein 9300, South Africa
References (30)
Show source-provided references
1. Biomedical titanium alloys with Young’s moduli close to that of cortical bone10.1093/rb/rbw016 ↗
2. Biocompatibility of advanced manufactured titanium implants—A review10.3390/ma7128168 ↗
3. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility10.1016/j.msec.2017.02.094 ↗
4. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review10.1016/j.pmatsci.2008.06.004 ↗
5. Antibacterial coating of implants in orthopaedics and trauma: A classification proposal in an evolving panorama10.1186/s13018-015-0294-5 ↗
6. Antibacterial mechanism of copper-bearing antibacterial stainless steel against E. coli
7. Antibacterial copper deposited onto and into the oxide layer of titanium implants
8. Prevention of pin tract infection with Titanium-Copper alloys10.1002/jbm.b.31412 ↗
9. Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks10.1108/13552541211218117 ↗
10. Peculiarities of single track formation from Ti6Al4V alloy at different laser power densities by SLM
11. Yadroitsev, I. (2009). Selective Laser Melting: Direct Manufacturing of 3D-objectsby Selective Laser Melting of Metal Powders, LAP Lambert Academic Publishing AG & Co. KG.
12. Hierarchical design principles of selective laser melting for high quality metallic objects10.1016/j.addma.2014.12.007 ↗
13. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
14. Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures10.1016/j.intermet.2013.11.012 ↗
15. In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders10.1016/j.msec.2016.02.033 ↗
16. Dadbakhsh, S., and Hao, L. (2014). Effect of layer thickness in selective laser melting on microstructure of Al/5 wt.% Fe2O3 powder consolidated parts. Sci. World J., 2014.10.1155/2014/106129 ↗
17. Validation of miniaturised tensile testing on DMLS TI6Al4V (ELI) specimens
18. Comparative study of mechanical properties using standard and micro-specimens of base materials Inconel 625, Inconel 718 and Ti-6Al-4V10.1016/j.jmrt.2013.03.003 ↗
19. Evaluation of antimicrobial effects of novel implant materials by testing the prevention of biofilm formation using a simple small scale medium-throughput growth inhibition assay10.1080/08927014.2012.671305 ↗
20. Antibacterial properties of Ti-6Al-4V-xCu alloys10.1016/j.jmst.2013.12.014 ↗
21. Microstructure, corrosion and tribological and antibacterial properties of Ti-Cu coated stainless steel10.1016/j.jmbbm.2015.06.004 ↗
22. Microstructure, antibacterial properties and wear resistance of plasma Cu-Ni surface modified titanium10.1016/j.surfcoat.2013.06.012 ↗
23. ASME (2002). Surface Texture, Surface Roughness, Waviness and Lay, American Society of Mechanical Engineers.
24. Selective laser melting of Ti6Al4V alloy for biomedical applications: temperature monitoring and microstructural evolution10.1016/j.jallcom.2013.08.183 ↗
25. Deformation behavior and microstructure of Ti6Al4V manufactured by SLM10.1016/j.phpro.2016.08.080 ↗
26. Yadroitsev, I., Krakhmalev, P., and Yadroitsava, I. (2017). Titanium alloys manufactured by in situ alloying during laser powder bed fusion. JOM, in press.10.1007/s11837-017-2600-7 ↗
27. Non-contact measurements of surface tension and viscosity of niobium, zirconium, and titanium using an electrostatic levitation furnace10.1023/A:1015459222027 ↗
28. Reference data for the density and viscosity of liquid copper and liquid tin10.1063/1.3467496 ↗
29. Preliminary study on the corrosion resistance, antibacterial activity and cytotoxicity of selective-laser-melted Ti6Al4V-xCu alloys10.1016/j.msec.2016.11.126 ↗
30. Strain specificity in antimicrobial activity of silver and copper nanoparticles10.1016/j.actbio.2007.11.006 ↗