journal article·2019-09-26Open access

Graphene Oxide and Graphene Reinforced PMMA Bone Cements: Evaluation of Thermal Properties and Biocompatibility

E. Paz, Y. Ballesteros, J. Abenojar, J.C. del Real, N.J. Dunne

Materials· Volume 12· Issue 19

Abstract

The incorporation of well-dispersed graphene oxide (GO) and graphene (G) has been demonstrated as a promising solution to improve the mechanical performance of polymethyl methacrylate (PMMA) bone cements in an attempt to enhance the long-term survival of the cemented orthopaedic implants. However, to move forward with the clinical application of graphene-based PMMA bone cements, it is necessary to ensure the incorporation of graphene-based powders do not negatively affect other fundamental properties (e.g., thermal properties and biocompatibility), which may compromise the clinical success of the implant. In this study, the effect of incorporating GO and G on thermal properties, biocompatibility, and antimicrobial activity of PMMA bone cement was investigated. Differential scanning calorimetry studies demonstrated that the extent of the polymerisation reaction, heat generation, thermal conductivity, or glass transition temperature were not significantly (p > 0.05) affected by the addition of the GO or G powders. The cell viability showed no significant difference (p > 0.05) in viability when MC3-T3 cells were exposed to the surface of G- or GO-PMMA bone cements in comparison to the control. In conclusion, this study demonstrated the incorporation of GO or G powder did not significantly influence the thermal properties or biocompatibility of PMMA bone cements, potentially allowing its clinical progression.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Graphene and Nanomaterials Applications · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Research in Technology /Mechanical Engineering Dept., Universidad Pontificia Comillas, Alberto Aguilera 25, 28015 Madrid, Spain

Materials Science and Engineering Department, IAAB, Materials Performance Group, Universidad Carlos III de Madrid, Av. Universidad 30, 28911 Leganes, Madrid, Spain

Centre for Medical Engineering Research, School of Mechanical and Manufacturing Engineering, Dublin City University, Stokes Building, Collins Avenue, Dublin 9, Ireland

School of Mechanical and Manufacturing Engineering, Dublin City University, Stokes Building, Collins Avenue, Dublin 9, Ireland

School of Pharmacy, Queen’s University Belfast, 97 Lisburn Road, Belfast BT9 7BL, UK

Trinity Centre for Bioengineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin 2, Ireland

Advanced Materials and Bioengineering Research Centre (AMBER), Royal College of Surgeons in Ireland and Trinity College Dublin, Dublin D02 YN77, Ireland

References (56)

Show source-provided references
1. Graphene oxide: a convenient carbocatalyst for facilitating oxidation and hydration reactions10.1002/anie.201002160 ↗
2. The rise of graphene10.1038/nmat1849 ↗
3. Application of carbon-based nanomaterials in sample preparation: A review10.1016/j.aca.2013.03.054 ↗
4. Graphene-based polymer nanocomposites10.1016/j.polymer.2010.11.042 ↗
5. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
6. Phonons and thermal transport in graphene and graphene-based materials10.1088/1361-6633/80/3/036502 ↗
7. Antibacterial activity of graphite, graphite oxide, graphene oxide, and reduced graphene oxide: membrane and oxidative stress10.1021/nn202451x ↗
8. Graphene nanocomposite for biomedical applications: fabrication, antimicrobial and cytotoxic investigations10.1088/0957-4484/23/39/395101 ↗
9. fracture toughness and failure mechanism of graphene based epoxy composites10.1016/j.compscitech.2014.03.014 ↗
10. The role of functional groups on graphene oxide in epoxy nanocomposites10.1016/j.polymer.2013.08.026 ↗
11. Graphene oxide versus graphene for optimisation of pmma bone cement for orthopaedic applications10.1016/j.msec.2017.03.269 ↗
12. Graphene and graphene oxide functionalisation with silanes for advanced dispersion and reinforcement of PMMA-based bone cements10.1016/j.msec.2019.109946 ↗
13. Curing characteristics of acrylic bone cement10.1023/A:1013670132001 ↗
14. Thermal aspects of self-curing polymethylmethacrylate10.1302/0301-620X.57B4.511 ↗
15. Thermally induced bone necrosis in rabbits: relation to implant failure in humans10.1097/00003086-198406000-00044 ↗
16. Numerical modelling of cement polymerisation and thermal bone necrosis
17. Effect of MWCNT addition on the thermal and rheological properties of polymethyl methacrylate bone cement10.1016/j.carbon.2011.02.063 ↗
18. Graphene oxide versus functionalized carbon nanotubes as a reinforcing agent in a PMMA/HA bone cement10.1039/c2nr30303e ↗
19. Augmentation of acrylic bone cement with multiwall carbon nanotubes10.1002/jbm.a.30651 ↗
20. Fabrication, mechanical properties, and biocompatibility of graphene-reinforced chitosan composites10.1021/bm100470q ↗
21. Assessment of the toxic potential of graphene family nanomaterials10.1016/j.jfda.2014.01.009 ↗
22. Cytotoxicity of graphene oxide and graphene in human erythrocytes and skin fibroblasts10.1021/am200428v ↗
23. Graphene-based materials biocompatibility: A review10.1016/j.colsurfb.2013.05.022 ↗
24. Singh, Z.S. (2016). Applications and toxicity of graphene family nanomaterials and their composites. Nanotechnol. Sci. Appl., 15.10.2147/NSA.S101818 ↗
25. Graphene-based antibacterial paper10.1021/nn101097v ↗
26. Antibacterial activity of graphene oxide nanosheets10.1166/sam.2012.1402 ↗
27. Antimicrobial properties of graphene oxide nanosheets: why size matters10.1021/acsnano.5b02067 ↗
28. Influence of multiwall carbon nanotube functionality and loading on mechanical properties of PMMA/MWCNT bone cements10.1007/s10856-009-3960-5 ↗
29. Epoxy composite reinforced with nano and micro sic particles: curing kinetics and mechanical properties10.1080/00218464.2012.660396 ↗
30. Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data10.1016/S0040-6031(99)00253-1 ↗
31. Measurement of the thermal conductivity of solid substances by DSC10.1016/0040-6031(85)85081-4 ↗
32. Measurement of thermal conductivity by differential scanning calorimetry10.1016/j.tca.2003.12.023 ↗
33. Residual monomer content in bone cements based on poly (methyl methacrylate)10.1002/1097-0126(200008)49:8<831::AID-PI462>3.0.CO;2-3 ↗
34. Isothermal and non-isothermal polymerization of a new bone cement10.1023/A:1008898712929 ↗
35. Polymerization of acrylic bone cement investigated by differential scanning calorimetry: effects of heating rate and TCP content10.1002/pen.11762 ↗
36. Effect of initiation chemistry on the fracture toughness, fatigue strength, and residual monomer content of a novel high-viscosity, two-solution acrylic bone cement10.1002/jbm.1257 ↗
37. Influence of the radiopacifier in an acrylic bone cement on its mechanical, thermal, and physical properties: barium sulfate-containing cement versus iodine-containing cement10.1002/jbm.b.30176 ↗
38. Isothermal and non-isothermal polymerization of methyl methacrylate in presence of multiple initiators10.1016/j.cej.2010.06.004 ↗
39. Thermal characteristics of curing acrylic bone cement10.1016/S1297-9562(01)90034-8 ↗
40. High-conversion polymerization. I. theory and application to methyl methacrylate10.1002/pol.1976.170140409 ↗
41. Kinetic analysis and characterization of an epoxy/cork adhesive10.1016/j.tca.2015.01.025 ↗
42. Active sites on graphene-based materials as metal-free catalysts10.1039/C7CS00156H ↗
43. Graphene oxide induced crosslinking and reinforcement of elastomers10.1016/j.compscitech.2017.03.006 ↗
44. Radical chain polymerization catalyzed by graphene oxide and cooperative hydrogen bonding10.1002/marc.201500573 ↗
45. Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites10.1016/j.compositesb.2017.03.047 ↗
46. Kinetics of curing process in carbon/epoxy nano-composites10.1088/1757-899X/369/1/012011 ↗
47. Polymerization kinetics of boron carbide/epoxy composites10.1016/j.tca.2013.10.030 ↗
48. Real-Time synchronous measurement of curing characteristics and polymerization stress in bone cements with a cantilever-beam based instrument10.1063/1.5025476 ↗
49. Valencia Zapata, M.E., Mina Hernandez, J.H., Grande Tovar, C.D., Valencia Llano, C.H., Diaz Escobar, J.A., Vazquez-Lasa, B., San Roman, J., and Rojo, L. (2019). Novel bioactive and antibacterial acrylic bone cement nanocomposites modified with graphene oxide and chitosan. Int. J. Mol. Sci., 20.10.3390/ijms20122938 ↗
50. Does graphene change Tg of nanocomposites?10.1021/ma501799z ↗
51. Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties10.1002/polb.21187 ↗
52. (2019, August 01). Graphene-based Nanocomposites as Highly Efficient Thermal Interface Materials. Available online: https://arxiv.org/abs/1201.0796.
53. Graphene/polymer nanocomposites10.1021/ma100572e ↗
54. Thermal and magnetic properties of nanostructured densified ferrimagnetic composites with graphene-graphite fillers10.1016/j.matdes.2017.01.018 ↗
55. Dual-functional graphene composites for electromagnetic shielding and thermal management10.1002/aelm.201800558 ↗
56. Evaluation of the in vitro biocompatibility of PMMA/High-load HA/Carbon nanostructures bone cement formulations10.1007/s10856-013-5030-2 ↗