journal article·2018-09-25Open access

Evaluation of the Rosemary Extract Effect on the Properties of Polylactic Acid-Based Materials

Raluca Nicoleta Darie-Niţă, Cornelia Vasile, Elena Stoleru, Daniela Pamfil, Traian Zaharescu, Liliana Tarţău, Niţă Tudorachi, Mihai Adrian Brebu, Gina Mihaela Pricope, Raluca Petronela Dumitriu, Karol Leluk

Materials· Volume 11· Issue 10

Abstract

New multifunctional materials containing additives derived from natural resources as powdered rosemary ethanolic extract were obtained by melt mixing and processed in good conditions without degradation and loss of additives. Incorporation of powdered rosemary ethanolic extract (R) into poly(lactic acid) (PLA) improved elongation at break, rheological properties, antibacterial and antioxidant activities, in addition to the biocompatibility. The good accordance between results of the chemiluminescence method and radical scavenging activity determination by chemical method evidenced the increased thermoxidative stability of the PLA biocomposites with respect to neat PLA, with R acting as an antioxidant. PLA/R biocomposites also showed low permeability to gases and migration rates of the bioactive compounds and could be considered as high-performance materials for food packaging. In vitro biocompatibility based on the determination of surface properties demonstrated a good hydrophilicity, better spreading and division of fibroblasts, and increased platelet cohesion. The implantation of PLA/R pellets, was proven to possess a good in vivo biocompatibility, and resulted in similar changes in blood parameters and biochemical responses with the control group, suggesting that these PLA-based materials demonstrate very desirable properties as potential biomaterials, useful in human medicine for tissue engineering, wound management, orthopedic devices, scaffolds, drug delivery systems, etc. Therefore, PLA/R-based materials show promising properties for applications both in food packaging and as bioactive biomaterials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Microplastics and Plastic Pollution · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Physical Chemistry of Polymers, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi, Romania

National Institute for Electrical Engineering (INCDIE ICPE CA), 313 Splaiul Unirii, P.O. Box 149, 030138 Bucharest, Romania

Grigore T. Popa University of Medicine and Pharmacy Iasi, 16 University Street, 700115 Iasi, Romania

Veterinary and Food Safety Laboratory, Department of Food Safety, 700115 Iasi, Romania

Institute of Environmental Protection Engineering, Wroclaw University of Technology, Plac Grunwaldzki 9, 50-377 Wroclaw, Poland

Funding

EEA Financial Mechanism 2009–2014

References (87)

Show source-provided references
1. Antimicrobial additives for poly(lactic acid) materials and their applications: Current state and perspectives10.1007/s00253-018-9220-1 ↗
2. Antibacterial activity of ethanolic extract and compounds from fruits of Tectona grandis (Verbenaceae)10.1186/s12906-015-0790-5 ↗
3. Alara, O.R., Abdurahman, N.H., and Olalere, O.A. (2017). Ethanolic extraction of flavonoids, phenolics and antioxidants from vernonia amygdalina leaf using two-level factorial design. J. King Saud Univ. Sci., in press.
4. Antioxidative activity of summer savory (Satureja hortensis L.) and rosemary (Rosemarinus officinalis L.) in minced, cooked pork meat10.1007/BF01231071 ↗
5. Antioxidant activities of rosemary (Rosmarinus officinalis L.) extract, blackseed (Nigella sativa L.) essential oil, carnosic acid, rosmarinic acid and sesamol10.1016/j.foodchem.2008.01.058 ↗
6. Rosmarinus Officinalis Leaves as a Natural Source of Bioactive Compounds10.3390/ijms151120585 ↗
7. Rosemary and oxygen scavenger in active packaging for prevention of high-pressure induced lipid oxidation in pork patties10.1016/j.fpsl.2016.01.002 ↗
8. Antioxidative activity and phenolic composition of pilot-plant and commercial extracts of sage and rosemary10.1007/BF02518121 ↗
9. Scientific Opinion of the Panel on Food Additives, Flavourings, Processing aids and materials in contact with food on a request from the commission on the use of rosemary extracts as a food additive
10. Cytotoxic, genotoxic and antimicrobial activity of caffeic and rosmarinic acids and their lithium, sodium and potassium salts as potential anticancer compounds10.1016/j.advms.2017.07.003 ↗
11. Carnosol, an antioxidant in rosemary, suppresses inducible nitric oxide synthase through down-regulating nuclear factor-κB in mouse macrophages10.1093/carcin/23.6.983 ↗
12. Antioxidant activity of rosemary (Rosmarinus officinalis L.) essential oil and its hepatoprotective potential10.1186/1472-6882-14-225 ↗
13. Effect of PEG on PLA/PEG blend and its nanocomposites: A study of thermo-mechanical and morphological characterization10.1002/pc.22660 ↗
14. Arrieta, M.P., Samper, M.D., Aldas, M., and López, J. (2017). On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications. Materials, 10.10.3390/ma10091008 ↗
15. Polymer additives and solubility parameters10.1016/j.porgcoat.2004.05.003 ↗
16. Evaluation of some eco-friendly plasticizers for PLA films processing10.1002/app.43223 ↗
17. Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor10.1016/j.polymer.2006.04.013 ↗
18. Tayebi, L., and Moharamzadeh, K. (2018). Hydrogels in craniofacial tissue engineering. Biomaterials for Oral and Dental Tissue Engineering, Woodhead Publishing Elsevier Ltd.10.1016/B978-0-08-100961-1.00001-3 ↗
19. Properties and medical applications of polylactic acid: A review10.3144/expresspolymlett.2015.42 ↗
20. Biomedical Applications of Poly(Lactic Acid)
21. Polylactic Acid in Medicine10.1080/03602559.2014.979507 ↗
22. Recent applications of polylactic acid in pharmaceutical and medical industries
23. Commission regulation (EU) no. 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food
24. Migration of antimicrobial agents from starch-based films into a food simulant10.1016/j.lwt.2012.08.023 ↗
25. Release of thymol from poly(lactic acid)-based antimicrobial films containing kenaf fibres as natural filler10.1016/j.lwt.2015.11.011 ↗
26. Diffusivity of propolis compounds in polylactic acid polymer for the development of antimicrobial packaging films10.1016/j.jfoodeng.2009.12.028 ↗
27. Effect of rosemary extract on the radiation stability of UHMWPE
28. Tannins in wood-comparison of different estimation methods10.1021/jf00089a026 ↗
29. The determination of flavonoid contents in mulberry and their scavenging effect on superoxide radicals10.1016/S0308-8146(98)00102-2 ↗
30. Antioxidant activities of hot water extracts from various spices10.3390/ijms12064120 ↗
31. Solute diffusion through degradable semicrystalline polyethylene glycol/poly(l-lactide) copolymers10.1007/BF00587889 ↗
32. Commission directive 97/48/EC of 29 July 1997 amending for the second time council directive 82/711/EEC laying down the basic rules necessary for testing migration of the constituents of plastic materials and articles intended to come into contact with foodstuffs (97/48/EC)
33. Lipid Oxidation in Oil-in-Water Emulsions: Impact of Molecular Environment on Chemical Reactions in Heterogeneous Food Systems10.1111/j.1365-2621.2000.tb10596.x ↗
34. Storage method, drying processes and extraction procedures strongly affect the phenolic fraction of rosemary leaves: An HPLC/DAD/MS study10.1016/j.talanta.2011.03.050 ↗
35. Degradation study of carnosic acid, carnosol, rosmarinic acid, and rosemary extract (Rosmarinus officinalis L.) assessed using HPLC10.1021/jf302179c ↗
36. A simple equation for the description of solute release. III. Coupling of diffusion and relaxation10.1016/0378-5173(89)90306-2 ↗
37. Analysis of Fickian and non-Fickian drug release from polymers
38. Stability of a chitosan layer deposited onto a polyethylene surface10.1002/app.39329 ↗
39. Plasma-activated fibrinogen coatings onto poly(vinylidene fluoride) surface for improving biocompatibility with tissues10.1177/0883911515595236 ↗
40. Vasile, C., and Pascu, M.C. (2007). Contact angle method. Surface Properties of Polymers, Research Signpost. [1st ed.].
41. Vasile, C., and Pascu, M.C. (2007). Surface properties of polymers. Surface Properties of Polymers, Research Signpost. [1st ed.].
42. Bracco, G., and Holst, B. (2013). Contact angle and wetting properties. Surface Science Techniques, Springer.10.1007/978-3-642-34243-1 ↗
43. Complex poly(lactic acid)-based biomaterial for urinary catheters: II. Biocompatibility10.1680/jbibn.15.00012 ↗
44. Interfacial Lifshitz-Van der Waals and polar interactions in macroscopic systems10.1021/cr00088a006 ↗
45. Surface modifications of some nanocomposites containing starch10.1088/0022-3727/41/17/175407 ↗
46. Biomaterials based on new polyurethane and hydrolyzed collagen, k-elastin, hyaluronic acid and chondroitin sulphate10.1016/j.ijbiomac.2010.08.013 ↗
47. Biocidal activity of cellulose materials for medical implants10.1002/app.41932 ↗
48. Surface characterization of biopolyurethanes based on cellulose derivatives10.1007/s10856-008-3626-8 ↗
49. Interpenetring blood-biomaterial interactions from surface free energy and work of adhesion
50. Surface properties and compatibility with blood of new quaternized polysulfones10.4236/jbnb.2011.22015 ↗
51. Hodgson, E. (2004). A Textbook of Modern Toxicology, John Wiley & Sons. [3rd ed.].10.1002/0471646776 ↗
52. Acute systemic toxicity-prospects for tiered testing strategies10.1016/S0887-2333(03)00143-7 ↗
53. Boutrand, J.P. (2012). Practical approach to blood compatibility assessments: General considerations and standards. Biocompatibility and Performance of Medical Devices, Woodhead Publishing Ltd.. [1st ed.].10.1533/9780857096456 ↗
54. Lupuşoru, C.E. (2001). Imunofarmacologie, ALFA. [1st ed.].
55. Peacman, M. (2011). Clinical & Experimental Immunology, Wiley Library, British Society of Immunology.
56. Ethical guidelines for investigations of experimental pain in conscious animals10.1016/0304-3959(83)90201-4 ↗
57. (2018, August 01). Protocole D’amendement à la Convention Européenne sur la Protection des Animaux Vertébrés Utilisés à des Fins Expérimentales ou à D’autres Fins Scientifiques. (In French).
58. Combined effect of poly(hydroxybutyrate) and plasticizers on polylactic acid properties for film intended for food packaging10.1007/s10924-014-0654-y ↗
59. Antioxidant activity of rosemary extracts in solution and embedded in polymeric systems10.1515/chempap-2015-0024 ↗
60. (2018, August 01). Beauchamp Spectroscopy Tables. Available online: http://www.cpp.edu/~psbeauchamp/pdf/spec_ir_nmr_spectra_tables.pdf.
61. Morphology, biodegradability, mechanical, and thermal properties of nanocomposite films based on PLA and plasticized PLA10.1002/app.30772 ↗
62. Li, D., Jiang, Y., Lv, S., Liu, X., Gu, J., Chen, Q., and Zhang, Y. (2018). Preparation of plasticized poly (lactic acid) and its influence on the properties of composite materials. PLoS ONE, 13.10.1371/journal.pone.0193520 ↗
63. Zeid, A.M. (2015). Preparation and Evaluation of Polylactic Acid Antioxidant Packaging Films Containing Thyme, Rosemary and Oregano Essential Oils. [Master’s Thesis, The American University in Cairo (AUC)].
64. Rheological properties of cosmetic compositions containing rosemary and grapefruit pulp and seeds extracts
65. ATR-FTIR Study of thyme and rosemary oils extracted by supercritical carbon dioxide
66. Effects of tin on poly(l-lactic acid) pyrolysis10.1016/S0141-3910(03)00152-6 ↗
67. Tsuge, S., Ohtani, H., and Watanabe, C. (2011). Pyrolysis—GC/MS Data Book of Synthetic Polymers: Pyrograms, Thermograms and MS of Pyrolyzates, Elsevier.
68. Thermal degradation behavior and gas phase flame retardant mechanism of polylactide/PCPP blend10.1002/app.40480 ↗
69. UV initiated oxidation and chemiluminescence from aromatic-aliphatic copolyesters and polylactic acid10.1016/j.polymdegradstab.2013.09.016 ↗
70. Degradation of poly(l-lactic acid)10.1016/S0141-3910(01)00030-1 ↗
71. Volatile products and new polymer structures formed on 60Co γ-radiolysis of poly(lactic acid) and poly(glycolic acid)10.1016/S0141-3910(97)00050-5 ↗
72. Chemical and photochemical behaviour of phenolic antioxidants in polymer stabilization: A state of the art report, part II10.1016/0141-3910(93)90130-B ↗
73. Vasile, C., Sivertsvik, M., Miteluţ, A.C., Brebu, M.A., Stoleru, E., Rosnes, J.T., Tănase, E.E., Khan, W., Pamfil, D., and Cornea, C.P. (2017). Comparative analysis of the composition and active property evaluation of certain essential oils to assess their potential applications in active food packaging. Materials, 10.10.3390/ma10010045 ↗
74. Chemiluminescence study on irradiated low-density polyethylene containing various photo-stabilisers10.1016/j.polymdegradstab.2003.12.004 ↗
75. Łopusiewicz, Ł., Jędra, F., and Mizielińska, M. (2018). New poly(lactic acid) active packaging composite films incorporated with fungal melanin. Polymers, 10.10.3390/polym10040386 ↗
76. Characterization of an antioxidant polylactic acid (PLA) film prepared with α-tocopherol, BHT and polyethylene glycol using film cast extruder10.1016/j.jfoodeng.2010.04.005 ↗
77. (2018, August 01). Bacillus Cereus, Available online: https://www.foodsafety.gov/poisoning/causes/bacteriaviruses/bcereus/index.html.
78. Bacillus cereus, a volatile human pathogen10.1128/CMR.00073-09 ↗
79. Evaluation of Antibacterial Activity of Alcoholic Extract of Rosemary Leaves against Pathogenic Strains
80. Gas Permeation Properties of Poly(Lactic Acid). (R826733)10.1016/S0376-7388(01)00446-X ↗
81. Morphological, thermal and oxygen barrier properties plasticized film polylactic acid
82. (2018, May 08). Intermolecular Forces in Action: Surface Tension, Viscosity, and Capillary Action. Available online: https://chem.libretexts.org/Textbook_Maps/General_Chemistry_Textbook_Maps/Map%3A_A_Molecular_Approach_(Tro)/11%3A_Liquids%2C_Solids%2C_and_Intermolecular_Forces/11.04%3A_Intermolecular_Forces_in_Action%3A_Surface_Tension%2C_Viscosity%2C_and_Capillary_Action#title.
83. Interaction of fibroblasts and polymer surfaces: Relationship between surface free energy and fibroblast spreading10.1002/jbm.820170508 ↗
84. On the influence of flow conditions and wettability on blood material interactions10.1016/S0142-9612(03)00380-6 ↗
85. Biomaterials for blood-contacting applications10.1016/0142-9612(94)90026-4 ↗
86. The Impact of Contact Angle on the Biocompatibility of Biomaterials10.1097/OPX.0b013e3181da863e ↗
87. Tailorable polyelectrolyte protein complex based on poly(aspartic acid) and bovine serum albumin10.1080/15685551.2016.1187436 ↗