journal article·2018-11-13Open access

Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing

Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Rumiana Kotsilkova, Sonia Tabakova, Radost Ivanova, Polya Angelova, Verislav Angelov, Evgeni Ivanov, Rosa Di Maio, Clara Silvestre, Darya Meisak, Alesia Paddubskaya, Polina Kuzhir

Materials· Volume 11· Issue 11

Abstract

The limitation of poor mechanical stability and difficulties in printing electrically conductive components can be overcome owing to the recent introduction of nanotechnology into the field of additive manufacturing (AM) and the consequent development of nonconventional polymer nanocomposites suitable for 3D printing. In the present work, different weight percentages (up to 6 wt % in total) of carbon-based nanostructures—multiwalled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNPs), and a combination of both fillers (MWCNTs/GNPs)—were incorporated into poly(lactic) acid (PLA, Ingeo™) in an attempt to overcome several limitations of conventional 3D manufacturing based on insulating materials. Solution blending and melt mixing were the two fabrication methods adopted for preparation of the samples under test. A comparison of the morphological, rheological, and electrical properties of the resulting nanocomposites was carried out. Moreover, for the same weight concentrations, the influence of physical and geometrical features (i.e., functionalization and aspect ratio) of the embedded fillers was also investigated. Rheological methods were applied to control the quality of fillers dispersion in PLA matrix. The rheological percolation threshold was considered as reference in order to evaluate the internal structure of nanodispersions. TEM visualization, combined with rheological characterizations, was used for efficient control of the nanofiller dispersion. DC characterization revealed that lower electrical percolation thresholds and higher values of electrical conductivity were achieved using fillers with a larger aspect ratio and melt mixing, respectively. Moreover, given the possibility of obtaining complex and appropriate shapes for electromagnetic compatibility (EC) applications, electromagnetic (EM) response of the nanocomposites at the highest filler concentration was investigated in GHz and THz regions. It was found that the electromagnetic shielding efficiency (EMI) of nanocomposites strongly depended on the aspect ratio of the nanofillers, whereas the type of processing technique did not have a significant effect. Therefore, a careful choice of methods and materials must be made to address the final application for which these materials and further 3D printed architectures are designed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Information and Electrical Engineering and Applied Mathematics, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano (SA), Italy

Institute of Mechanics, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Block 4, 1113 Sofia, Bulgaria

Research and Development of Nanomaterials and Nanotechnologies (NanoTech Lab Ltd.), Acad. G. Bonchev Str. Block 1, 1113 Sofia, Bulgaria

Institute of Polymers, Composites and Biopolymers, CNR, Via Campi Flegrei 34 Olivetti, 80078 Pozzuoli (NA), Italy

Institute for Nuclear Problems of Belarusian State University, Bobruiskaya 11, 220030 Minsk, Belarus

36 Lenin Prospekt, Tomsk State University, Tomsk 634050, Russia

Funding

H2020 Marie Skłodowska-Curie Actions

References (42)

Show source-provided references
1. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
2. Lasers and materials in selective laser sintering10.1108/01445150310698652 ↗
3. Solvent-Cast Three-Dimensional Printing of Multifunctional Microsystems10.1002/smll.201300975 ↗
4. Ultraviolet-Assisted Direct-Write Fabrication of Carbon Nanotube/Polymer Nanocomposite10.1002/adma.200902192 ↗
5. Micro-stereolithography of polymeric and ceramic microstructure10.1016/S0924-4247(99)00189-2 ↗
6. Progress in additive manufacturing and rapid prototyping10.1016/S0007-8506(07)63240-5 ↗
7. Wong, K.V., and Hernandez, A. (2012). A review of additive manufacturing. ISRN Mech. Eng., 208760.10.5402/2012/208760 ↗
8. 3D printing of polymer matrix composites: A review and prospective10.1016/j.compositesb.2016.11.034 ↗
9. Inkjet printable nanosilver suspensions for enhanced sintering quality in rapid manufacturing10.1088/0957-4484/18/18/185701 ↗
10. Size effect on the melting of gold particle10.1103/PhysRevA.13.2287 ↗
11. Effect of carbon nanotube and functionalized liquid rubber on mechanical and electrical properties of epoxy adhesives for aircraft structures10.1016/j.compositesb.2017.07.021 ↗
12. Development of epoxy mixtures for application in aeronautics and aerospace10.1039/C3RA48031C ↗
13. Material issues in additive manufacturing: A review10.1016/j.jmapro.2016.11.006 ↗
14. Crump, S.S. (1994). Apparatus and Method for Creating Three-Dimensional Objects. (No. 5,340,433), U.S. Patent.
15. Three dimensional (3D) printed electrodes for interdigitated supercapacitors10.1016/j.elecom.2014.01.013 ↗
16. Helical 3D-Printed Metal Electrodes as Custom-Shaped 3D Platform for Electrochemical Devices10.1002/adfm.201503902 ↗
17. Conformal printing of electrically small antennas on three-dimensional surfaces10.1002/adma.201003734 ↗
18. 3D printing of a multifunctional nanocomposite helical liquid sensor10.1039/C5NR00278H ↗
19. Bustillos, J., Montero, D., Nautiyal, P., Loganathan, A., Boesl, B., and Agarwal, A. (2017). Integration of Graphene in Poly(Lactic) Acid by 3D Printing to Develop Creep and Wear-Resistant Hierarchical Nanocomposites. Polym. Compos., 1–12.10.1002/pc.24422 ↗
20. Electrically conductive filament for 3D-printed circuits and sensors10.1016/j.apmt.2017.07.001 ↗
21. Effect of FDM Process on Adhesive Strength of Polylactic Acid (PLA) Filament10.4028/www.scientific.net/KEM.667.181 ↗
22. Mechanical characterization of 3D-printed polymers
23. 3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling10.1016/j.apmt.2017.04.003 ↗
24. Fully carbon metasurface: Absorbing coating in microwaves10.1063/1.4982232 ↗
25. Poly (lactic acid) composites with poly (lactic acid)-modified carbon nanotubes10.1002/pola.26778 ↗
26. Promising PLA-functionalized MWCNT composites to use in nanotechnology10.1002/pc.23504 ↗
27. Utracki, L.A. (2004). Clay-Containing Polymer Nanocomposites, Rapra Technology.
28. Kotsilkova, R. (2007). Thermosetting Nanocomposites for Engineering Application, Smithers Rapra Technology.
29. Percolation thresholds in the three-dimensional sticks system10.1103/PhysRevLett.52.1465 ↗
30. Numerical investigation on the influence factors of the electrical properties of carbon nano tubes-filled composites10.1063/1.4811523 ↗
31. A simulation study on the combined effects of nanotube shape and shear flow on the electrical percolation thresholds of carbon nanotube/polymer composites10.1063/1.3573668 ↗
32. The effect of filler aspect ratio on the electromagnetic properties of carbon-nanofibers reinforced composites10.1063/1.4928317 ↗
33. Low Percolation Threshold in Nanocomposites Based on Oxidized Single Wall Carbon Nanotubes and Poly(butylene terephthalate)10.1021/ma049440r ↗
34. Morphology and properties of electrically and rheologically percolated PLA/PCL/CNT nanocomposites10.1002/app.45265 ↗
35. Selective Localization of Multiwalled Carbon Nanotubes in Poly (ε-caprolactone)/Polylactide Blend10.1021/bm801183f ↗
36. A morphological and structural approach to evaluate the electromagnetic performances of composites based on random networks of carbon nanotubes
37. Electrical, dielectric, and electromagnetic shielding properties of polypropylene-graphite composites10.1002/app.29702 ↗
38. Giant Dielectric Permittivity Nanocomposites: Realizing True Potential of Pristine Carbon Nanotubes in Polyvinylidene Fluoride Matrix through an Enhanced Interfacial Interaction10.1021/jp1117163 ↗
39. Electromagnetic properties of polyurethane template-based carbon foams in Ka-band10.1088/0031-8949/90/9/094019 ↗
40. Electromagnetic and Thermal properties of 3D Printed Multilayered Nano-carbon / Poly(lactic) Acid Structures10.1063/1.4945576 ↗
41. Electromagnetic shielding efficiency in Ka-band: Carbon foam versus epoxy/CNT composites10.1117/1.JNP.6.061715 ↗
42. The role of finite size effects in the microwave and sub-terahertz electromagnetic response of multiwall carbon nanotube based composite: Theory and interpretation of experiment10.1103/PhysRevB.88.045436 ↗