journal article·2021-12-22Open access

Predicting the Ultimate Axial Capacity of Uniaxially Loaded CFST Columns Using Multiphysics Artificial Intelligence

Sangeen Khan, Mohsin Ali Khan, Adeel Zafar, Muhammad Faisal Javed, Fahid Aslam, Muhammad Ali Musarat, Nikolai Ivanovich Vatin

Materials· Volume 15· Issue 1

Abstract

The object of this research is concrete-filled steel tubes (CFST). The article aimed to develop a prediction Multiphysics model for the circular CFST column by using the Artificial Neural Network (ANN), the Adaptive Neuro-Fuzzy Inference System (ANFIS) and the Gene Expression Program (GEP). The database for this study contains 1667 datapoints in which 702 are short CFST columns and 965 are long CFST columns. The input parameters are the geometric dimensions of the structural elements of the column and the mechanical properties of materials. The target parameters are the bearing capacity of columns, which determines their life cycle. A Multiphysics model was developed, and various statistical checks were applied using the three artificial intelligence techniques mentioned above. Parametric and sensitivity analyses were also performed on both short and long GEP models. The overall performance of the GEP model was better than the ANN and ANFIS models, and the prediction values of the GEP model were near actual values. The PI of the predicted Nst by GEP, ANN and ANFIS for training are 0.0416, 0.1423, and 0.1016, respectively, and for Nlg these values are 0.1169, 0.2990 and 0.1542, respectively. Corresponding OF values are 0.2300, 0.1200, and 0.090 for Nst, and 0.1000, 0.2700, and 0.1500 for Nlg. The superiority of the GEP method to the other techniques can be seen from the fact that the GEP technique provides suitable connections based on practical experimental work and does not rely on prior solutions. It is concluded that the GEP model can be used to predict the bearing capacity of circular CFST columns to avoid any laborious and time-consuming experimental work. It is also recommended that further research should be performed on the data to develop a prediction equation using other techniques such as Random Forest Regression and Multi Expression Program.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Health Monitoring Techniques · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Structural Engineering, Military College of Engineering (MCE), National University of Science and Technology (NUST), Islamabad 44000, Pakistan

Civil Engineering Department, CECOS University of IT and Emerging Science, Peshawar 25000, Pakistan

Department of Civil Engineering, COMSATS University Islamabad, Abbottabad Campus, Abbottabad 22060, Pakistan

Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia

Department of Civil and Environmental Engineering, University Teknologi PETRONAS, Bandar Seri Iskandar 32610, Malaysia

Peter the Great St. Petersburg Polytechnic University, 195291 St. Petersburg, Russia

References (100+)

Show source-provided references
1. Recent developments and fire design provisions for CFST columns and slim-floor beams10.1016/j.jcsr.2020.106159 ↗
2. Suizi, J., Wanlin, C., Zibin, L., Wei, D., and Yingnan, S. (2019). Experimental study on a prefabricated lightweight concrete-filled steel tubular framework composite slab structure subjected to reversed cyclic loading. Appl. Sci., 9.10.3390/app9061264 ↗
3. The effects of cross-sectional shapes on the axial performance of concrete-filled steel tube columns10.1016/j.jcsr.2020.106424 ↗
4. Shape effect on axially loaded high strength CFST stub columns10.1016/j.jcsr.2018.04.005 ↗
5. Analysis and design of eccentrically compressed ultra-high-strength slender CFST circular columns10.1016/j.istruc.2020.08.037 ↗
6. Concrete-filled steel tubular columns: Test database, design and calibration10.1016/j.jcsr.2019.02.024 ↗
7. Chinese, S. (2014). Technical Code for Concrete Filled Steel Tubular Structures.
8. AIJ (1997). Recommendations for Design and Construction of Concrete Filled Steel Tubular Structures, AIJ.
9. ANSI/AISC 360-05 (2016). Specification for Structural Steel Buildings, American Institute of Steel Construction.
10. Uy, B., Hicks, S.J., Kang, W.-H., Thai, H.-T., and Aslani, F. (August, January 30). The New Australia/New Zealand Standard on Composite Steel-Concrete Buildings. Proceedings of the 8th International Conference on Composite Construction in Steel and Concrete, Jackson, WY, USA. ASNZS2327.
11. European Committee for Standardization (2004). 1-1; Eurocode 4: Design of Composite Steel and Concrete Structures—Part 1-1: General Rules and Rules for Buildings, Europian Committee for Standardization.
12. Liew, J.R. (2015). Design Guide for Concrete Filled Tubular Members with High Strength Materials to Eurocode 4, Research Publishing.10.3850/978-981-09-3267-1 ↗
13. Behaviour and design of short high-strength steel welded box and concrete-filled tube (CFT) sections10.1016/j.engstruct.2017.06.016 ↗
14. Strength of slender concrete filled high strength steel box columns10.1016/j.jcsr.2004.05.002 ↗
15. Using statistical methods to determine the load-bearing capacity of rectangular CFST columns10.1051/matecconf/201823404002 ↗
16. Le, T.-T. (2020). Practical machine learning-based prediction model for axial capacity of square CFST columns. Mech. Adv. Mater. Struct., 1–16.
17. Mai, S.H., Seghier, M., Nguyen, P.L., Jafari-Asl, J., and Thai, D.-K. (2020). A hybrid model for predicting the axial compression capacity of square concrete-filled steel tubular columns. Eng. Comput., 1–18.10.1007/s00366-020-01104-w ↗
18. Performance evaluation of recycled aggregate concrete-filled steel tubes under different loading conditions: Database analysis and modelling10.1016/j.jobe.2020.101308 ↗
19. Nguyen, H.Q., Ly, H.-B., Tran, V.Q., Nguyen, T.-A., Le, T.-T., and Pham, B.T. (2020). Optimization of Artificial Intelligence System by Evolutionary Algorithm for Prediction of Axial Capacity of Rectangular Concrete Filled Steel Tubes under Compression. Materials, 13.10.3390/ma13051205 ↗
20. Estimation of axial load-carrying capacity of concrete-filled steel tubes using surrogate models10.1007/s00521-020-05214-w ↗
21. Luat, N.-V., Shin, J., and Lee, K. (2020). Hybrid BART-based models optimized by nature-inspired metaheuristics to predict ulti-mate axial capacity of CCFST columns. Eng. Comput., 1–30.10.1007/s00366-020-01115-7 ↗
22. Dao, D.V., Ly, H.-B., Vu, H.-L.T., Le, T.-T., and Pham, B.T. (2020). Investigation and optimization of the C-ANN structure in predicting the compressive strength of foamed concrete. Materials, 13.10.3390/ma13051072 ↗
23. Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors
24. A generalized method to predict the compressive strength of high-performance concrete by improved random forest algorithm10.1016/j.conbuildmat.2019.07.315 ↗
25. Compressive strength of fly-ash-based geopolymer concrete by gene expression programming and random forest10.1155/2021/6618407 ↗
26. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)
27. Feasibility of artificial neural network in civil engineering10.31142/ijtsrd22985 ↗
28. Applications of particle swarm optimization in geotechnical engineering: A comprehensive review10.1007/s10706-017-0356-z ↗
29. Genetic programming based formulation to predict compressive strength of high strength concrete
30. Ali Khan, M., Zafar, A., Akbar, A., Javed, M.F., and Mosavi, A.J.M. (2021). Application of Gene Expression Programming (GEP) for the prediction of compressive strength of geopolymer concrete. Materials, 14.10.31219/osf.io/bwm4k ↗
31. Nguyen, Q.H., Ly, H.-B., Tran, V.Q., Nguyen, T.-A., Phan, V.-H., Le, T.-T., and Pham, B. (2020). A novel hybrid model based on a feedforward neural network and one step secant algorithm for prediction of load-bearing capacity of rectangular concrete-filled steel tube columns. Molecules, 25.10.3390/molecules25153486 ↗
32. Prediction of fire resistance of concrete filled tubular steel columns using neural networks10.1016/S0379-7112(01)00065-0 ↗
33. Application of ANN to the design of CFST columns10.1016/j.istruc.2020.10.048 ↗
34. ANFIS-Based Accurate Estimation of the Confinement Effect for Concrete-Filled Steel Tubular (CFST)10.1007/s40815-020-00902-0 ↗
35. The prediction of ultimate pure bending moment of concrete-filled steel tubes by adaptive neuro-fuzzy inference system (ANFIS)10.1007/s00521-017-3108-3 ↗
36. Assessment of artificial neural network and genetic programming as predictive tools10.1016/j.advengsoft.2015.05.007 ↗
37. Javed, M.F., Farooq, F., Memon, S.A., Akbar, A., Khan, M.A., Aslam, F., Alyousef, R., Alabduljabbar, H., and Rehman, S.K.U. (2020). New prediction model for the ultimate axial capacity of concrete-filled steel tubes: An evolutionary approach. Crystals, 10.10.3390/cryst10090741 ↗
38. Ultimate axial strength of concrete-filled double skin steel tubular column sections10.1155/2019/6493037 ↗
39. Ultimate capacity prediction of axially loaded CFST short columns10.1007/s13296-016-3009-9 ↗
40. Genetic programming in civil engineering: Advent, applications and future trends10.1007/s10462-020-09894-7 ↗
41. Predictive modeling of swell-strength of expansive soils using artificial intelligence approaches: ANN, ANFIS and GEP10.1016/j.jenvman.2021.112420 ↗
42. Venkatesh, K., and Bind, Y.K. (2020). ANN and Neuro-Fuzzy Modeling for Shear Strength Characterization of Soils. Proc. Natl. Acad. Sci. India Sect. A Phys. Sci., 1–7.10.1007/s40010-020-00709-6 ↗
43. Evaluation of ANN and ANFIS modeling ability in the prediction of AISI 1050 steel machining performance10.1016/j.heliyon.2021.e06136 ↗
44. Statistical analysis and ANN modeling for predicting hydrological extremes under climate change scenarios: The example of a small Mediterranean agro-watershed10.1016/j.jenvman.2015.02.034 ↗
45. 10 Artificial Neural Networks in Geotechnical Engineering: Modeling and Application Issues10.1016/B978-0-12-398296-4.00010-6 ↗
46. New activation functions for single layer feedforward neural network10.1016/j.eswa.2020.113977 ↗
47. Xu, B., Huang, R., and Li, M. (2016). Revise saturated activation functions. arXiv, preprint.
48. New algebraic activation function for multi-layered feed forward neural networks10.1080/03772063.2016.1240633 ↗
49. Ramachandran, P., Zoph, B., and Le, Q.V. (2017). Searching for activation functions. arXiv, preprint.
50. Deep neural networks with multistate activation functions10.1155/2015/721367 ↗
51. Tang, Y.-J., Zhang, Q.-Y., and Lin, W. (2010, January 23–25). Artificial neural network based spectrum sensing method for cognitive radio. Proceedings of the 2010 6th International Conference on Wireless Communications Networking and Mobile Computing (WiCOM), Chengdu, China.
52. Experimental evaluation and ANN modeling of thermal conductivity of graphene oxide nanoplatelets/deionized water nanofluid10.1016/j.icheatmasstransfer.2016.06.003 ↗
53. Comparison of artificial neural network transfer functions abilities to simulate extreme runoff data
54. Using artificial neural network and genetics algorithm to estimate the resilient modulus for stabilized subgrade and propose new empirical formula10.1016/j.trgeo.2020.100358 ↗
55. A robust data mining approach for formulation of geotechnical engineering systems
56. Nosratabadi, S., Mosavi, A., Duan, P., Ghamisi, P., Filip, F., Band, S.S., Reuter, U., Gama, J., and Gandomi, A.H. (2020). Data science in economics: Comprehensive review of advanced machine learning and deep learning methods. Mathematics, 8.10.35542/osf.io/5dwrt ↗
57. Shahin, M.A. (2013). Artificial intelligence in geotechnical engineering: Applications, modeling aspects, and future directions. Metaheuristics in Water, Geotechnical and Transport Engineering, Curtin University.10.1016/B978-0-12-398296-4.00008-8 ↗
58. Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer10.1016/j.conbuildmat.2019.117266 ↗
59. Development of an intelligent system based on ANFIS model for predicting soil erosion10.1007/s12665-018-7348-z ↗
60. A comprehensive review on identification of the geomaterial constitutive model using the computational intelligence method10.1016/j.aei.2018.08.021 ↗
61. Gene expression programming for process parameter optimization during ultrafiltration of surfactant wastewater using hydrophilic polyethersulfone membrane10.1016/j.jenvman.2020.110444 ↗
62. Ferreira, C. (2002). Gene expression programming in problem solving. Soft Computing and Industry, Springer.10.1007/978-1-4471-0123-9_54 ↗
63. A new empirical formula for evaluating uniaxial compressive strength using the Schmidt hammer test10.1016/j.ijrmms.2019.104094 ↗
64. New prediction models for unconfined compressive strength of geopolymer stabilized soil using multi-gen genetic programming10.1016/j.measurement.2017.08.043 ↗
65. Ferreira, C. (2002, January 8–13). Mutation, Transposition, and Recombination: An Analysis of the Evolutionary Dynamics. Proceedings of the 6th Joint Conference on Information Sciences, Research Triangle Park, Raleigh, NC, USA.
66. Uniaxial compressive strength prediction through a new technique based on gene expression programming10.1007/s00521-017-2939-2 ↗
67. Vyas, R., Goel, P., and Tambe, S.S. (2015). Genetic programming applications in chemical sciences and engineering. Handbook of Genetic Programming Applications, Springer.10.1007/978-3-319-20883-1_5 ↗
68. Prediction of pavement roughness using a hybrid gene expression programming-neural network technique
69. Lam, D., and Goode, C. (2008, January 20–24). Concrete Filled Steel Tube Columns-Test compared with Eurocode4. Proceedings of the International Conference on Composite Construction in Steel and Concrete 2008, Devil’s Thumb Ranch, CO, USA.
70. Interpretation of concrete strength for nonstandard specimens10.1061/(ASCE)0899-1561(2002)14:2(151) ↗
71. Evolutionary artificial intelligence approach for performance prediction of bio-composites10.1016/j.conbuildmat.2021.123254 ↗
72. Maeda, T. (2018). How to Rationally Compare the Performances of Different Machine Learning Models?, PeerJ Preprints.10.7287/peerj.preprints.26714v1 ↗
73. Strength and dynamic elasticity modulus of rubberized concrete designed with ANFIS modeling and ultrasonic technique10.1016/j.conbuildmat.2019.117920 ↗
74. Ferreira, C. (2006). Gene Expression Programming: Mathematical Modeling by an Artificial Intelligence, Springer.
75. Design equations for prediction of pressuremeter soil deformation moduli utilizing expression programming systems10.1007/s00521-012-1144-6 ↗
76. Genetic representation and genetic neutrality in gene expression programming10.1142/S0219525902000626 ↗
77. Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming10.1016/j.jhazmat.2019.121322 ↗
78. Prediction of compressive and tensile strength of Gaziantep basalts via neural networks and gene expression programming10.1007/s00521-008-0208-0 ↗
79. Prediction of daily global solar radiation using different machine learning algorithms: Evaluation and comparison10.1016/j.rser.2020.110114 ↗
80. Estimating the refractive index of oxygenated and deoxygenated hemoglobin using genetic algorithm–support vector regression model10.1016/j.cmpb.2018.05.029 ↗
81. State-of-the-art review of soft computing applications in underground excavations10.1016/j.gsf.2019.12.003 ↗
82. Use of evolutionary computing for modelling some complex problems in geotechnical engineering10.1080/17486025.2014.921333 ↗
83. Nonlinear genetic-based models for prediction of flow number of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000154 ↗
84. Estimation of soil dispersivity using soft computing approaches10.1007/s00521-016-2320-x ↗
85. Sustainable use of fly-ash: Use of gene-expression programming (GEP) and multi-expression programming (MEP) for forecasting the compressive strength geopolymer concrete10.1016/j.asej.2021.03.018 ↗
86. Khan, M.A., Shah, M.I., Javed, M.F., Khan, M.I., Rasheed, S., El-Shorbagy, M., El-Zahar, E.R., and Malik, M. (2021). Application of random forest for modelling of surface water salinity. Ain Shams Eng. J., in press.
87. Artificial neural networks approach for swell pressure versus soil suction behaviour10.1139/T07-052 ↗
88. Aslam, F., Elkotb, M.A., Iqtidar, A., Khan, M.A., Javed, M.F., Usanova, K.I., Khan, M.I., Alamri, S., and Musarat, M.A. (2021). Compressive strength prediction of rice husk ash using multiphysics genetic expression programming. Ain Shams Eng. J., in press.10.1016/j.asej.2021.09.020 ↗
89. New formulations for mechanical properties of recycled aggregate concrete using gene expression programming10.1016/j.conbuildmat.2016.10.114 ↗
90. Mohammadzadeh, S., Kazemi, S.-F., Mosavi, A., Nasseralshariati, E., and Tah, J.H. (2019). Prediction of compression index of fine-grained soils using a gene expression programming model. Infrastructures, 4.10.3390/infrastructures4020026 ↗
91. Frank, I.E., and Todeschini, R. (1994). The Data Analysis Handbook, Elsevier.
92. Deep neural network with high-order neuron for the prediction of foamed concrete strength10.1111/mice.12422 ↗
93. Sustainable utilization of foundry waste: Forecasting mechanical properties of foundry sand based concrete using multi-expression programming10.1016/j.scitotenv.2021.146524 ↗
94. Lewis, C.D. (1982). Industrial and Business Forecasting Methods: A Practical Guide to Exponential Smoothing and Curve Fitting, Butterworth-Heinemann.
95. Comparing Forecasting Models in Tourism10.1177/1096348007309566 ↗
96. Empirical modeling of plate load test moduli of soil via gene expression pro-gramming10.1016/j.compgeo.2010.11.008 ↗
97. On some aspects of variable selection for partial least squares regression models10.1002/qsar.200710043 ↗
98. Surrogate based Global Sensitivity Analysis of ADM1-based Anaerobic Digestion Model10.1016/j.jenvman.2020.111456 ↗
99. Size effect in circular concrete-filled steel tubes with different diameter-to-thickness ratios under axial compression10.1016/j.engstruct.2017.08.022 ↗
100. Parametric study on the axial behaviour of concrete filled steel tube (CFST) columns