journal article·2015-04-28Open access

Low-Pressure H2, NH3 Microwave Plasma Treatment of Polytetrafluoroethylene (PTFE) Powders: Chemical, Thermal and Wettability Analysis

Harald Hunke, Navneet Soin, Tahir Shah, Erich Kramer, Alfons Pascual, Mallampalli Karuna, Elias Siores

Materials· Volume 8· Issue 5

Abstract

Functionalization of Polytetrafluoroethylene (PTFE) powders of ~6 μm particle size is carried out using low-pressure 2.45 GHz H2, NH3 microwave plasmas for various durations (2.5, 10 h) to chemically modify their surface and alter their surface energy. The X-ray Photoelectron Spectroscopy (XPS) analyses reveal that plasma treatment leads to significant defluorination (F/C atomic ratio of 1.13 and 1.30 for 10 h NH3 and H2 plasma treatments, respectively vs. 1.86 for pristine PTFE), along with the incorporation of functional polar moieties on the surface, resulting in enhanced wettability. Analysis of temperature dependent XPS revealed a loss of surface moieties above 200 °C, however, the functional groups are not completely removable even at higher temperatures (>300 °C), thus enabling the use of plasma treated PTFE powders as potential tribological fillers in high temperature engineering polymers. Ageing studies carried over a period of 12 months revealed that while the surface changes degenerate over time, again, they are not completely reversible. These functionalised PTFE powders can be further used for applications into smart, high performance materials such as tribological fillers for engineering polymers and bio-medical, bio-material applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Materials Research & Innovation (IMRI), University of Bolton, Deane Road, Bolton BL3 5AB, UK

Institute of Polymer Engineering, University of Applied Sciences (UAS), Northwestern Switzerland, 5210 Windisch, Switzerland

Center for Lipid Research, Indian Institute of Chemical Technology (IICT), Hyderabad 500007, India

References (35)

Show source-provided references
1. Chemical surface treatment of poly(tetrafluoroethylene) powder10.1002/apmc.1993.052090102 ↗
2. Surface modification of poly(tetrafluoroethylene) with pulsed hydrogen plasma10.1002/app.2249 ↗
3. Ebnesajjad, S., and Khaladkar, P. (2008). Fluoroplastics, Elsevier Science.
4. Functionalization of irradiated PTFE micropowder with methacryl- or hydroxy groups for chemical coupling of PTFE with different matrix polymers10.1002/app.22885 ↗
5. Insertion of sulfur-containing functional groups into polytetrafluoroethylene (PTFE) by low pressure plasma treatment10.1016/S0257-8972(99)00140-1 ↗
6. Ammonia plasma treatment of PTFE under known plasma conditions10.1002/(SICI)1096-9918(199611)24:12<821::AID-SIA189>3.0.CO;2-B ↗
7. Wettability and surface chemistry of irradiated PTFE10.1002/apmc.1990.051800114 ↗
8. Radiation degradation of fluoropolymers: Carboxylated fluoropolymers from radiation degradation in presence of air10.1002/app.1993.070481111 ↗
9. Surface modification of poly(tetrafluoroethylene) film by chemical etching, plasma, and ion beam treatments10.1002/1097-4628(20000829)77:9<1913::AID-APP7>3.0.CO;2-# ↗
10. Diener electronic GmbH + Co. KG. Plasma Technology. Available online: http://www.plasmasurfacetechnology.eu/media/Plasmatechnik_en_web.pdf.
11. ESCA study of polymer surfaces treated by plasma10.1002/pol.1977.170150420 ↗
12. Influence of plasma pre-treatment of Polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of Polyethersulfone (PESU)-PTFE composites10.1016/j.wear.2015.03.004 ↗
13. Modification of fluoropolymers by means of electron beam irradiation10.1016/S0969-806X(99)00407-7 ↗
14. Chemical modification of poly(tetrafluoroethylene) micropowder - basis for special lubricant additives10.1002/ls.1209 ↗
15. Change in charging characteristics of polymer powder by plasma treatment10.1016/S0304-3886(01)00033-X ↗
16. Application of plasmochemical processes in treatment of properties of macromolecular materials. II. Surface treatment of polypropylene by oxygen-nitrogen plasma in the fluidized bed
17. Cordian, A. (2005). Plasma Surface Modification of Polymer Powders in a Downer Reactor, ETH.
18. Surface modification of polyethylene powder by nitrogen and ammonia low pressure plasma in a fluidized bed reactor10.1016/j.reactfunctpolym.2004.06.003 ↗
19. Short-time plasma surface modification of polymer powders in a down flowing tube reactor10.1016/j.surfcoat.2005.01.123 ↗
20. Short-time plasma surface modification of HDPE powder in a Plasma Downer Reactor—process, wettability improvement and ageing effects10.1016/j.apsusc.2005.02.099 ↗
21. Plasma surface modification of polymer powders with application to thermal energy storage10.1002/app.1986.070310313 ↗
22. Katrin, R. (2001). Plasmamodifizierung von Polyethylen. [Ph.D. Thesis, Martin-Luther-Universität].
23. Atmospheric pressure plasma treatment of polymeric powders10.1016/j.surfcoat.2013.02.006 ↗
24. The dynamics of capillary flow10.1103/PhysRev.17.273 ↗
25. Plasma modification of PTFE surfaces. Part I: Surfaces immediately following plasma treatment10.1002/sia.1065 ↗
26. Stability and ageing of plasma treated poly(tetrafluoroethylene) surfaces10.1016/S0927-7765(01)00333-2 ↗
27. Plasma modification of PTFE surfaces. Part II: Plasma-treated surfaces following storage in air or PBS10.1002/sia.1066 ↗
28. Surface characterization of plasma-treated PTFE surfaces: an OES, XPS and contact angle study10.1002/sia.1829 ↗
29. Effects of plasma power and reaction gases on the surface properties of ePTFE materials during a plasma modification process10.1016/j.surfcoat.2012.05.014 ↗
30. Effect of X-ray flux on polytetrafluoroethylene in X-ray photoelectron spectroscopy10.1116/1.571362 ↗
31. A study of atmospheric pressure plasma discharges for surface functionalization of PTFE used in biomedical applications10.1088/0022-3727/39/16/S03 ↗
32. Chemical surface modification on polytetrafluoroethylene films by vacuum ultraviolet excimer lamp irradiation in ammonia gas atmosphere10.1063/1.116269 ↗
33. Electron beam facility in polymer research: Radiation induced functionalization of polytetrafluoroethylene10.1016/S0168-583X(97)00937-3 ↗
34. Study on the influence of PTFE particle size on the polymer thermal behavior: I. Melting10.1023/A:1019924209771 ↗
35. Oxygen plasma surface treatment of polymer powder in a fluidized bed reactor10.1016/S0927-7757(97)00109-X ↗