journal article·2017-08-22Open access

Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating

Anping Dong, Baoping Li, Yanling Lu, Guoliang Zhu, Hui Xing, Da Shu, Baode Sun, Jun Wang

Materials· Volume 10· Issue 8

Abstract

The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner is the same as Zn-Mg binary phase diagram, suggesting Al in the Zn-Mg (ZM) coatings mainly concentrates on the interfacial layer between the coating and steel substrate. The microstructure of continuously hot-dip galvanizing ZM coatings with 0.20 wt % Al containing 1.0–3.0 wt % Mg was investigated using tunneling electron microscopy (TEM). The morphology of Zn in the coating changes from bulk to strip and finally to mesh-like, and the MgZn2 changes from rod-like to mesh-like with the Mg content increasing. Al in the ZM coatings mainly segregates at the Fe2Al5 inhibition layer and the Mg added to the Zn bath makes this inhibition layer thinner and uneven. Compared to GI coating, the time of the first red rust appears increases by more than two-fold and expansion rate of red rust reduces by more than four-fold in terms of salt spray experiment. The ZM coating containing 2.0 wt % Mg has the best corrosion resistance. The enhanced corrosion resistance of ZM coatings mainly depends on different corrosion products.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Shanghai Key Lab of Advanced High-temperature Materials and Precision Forming, Shanghai 200240, China

Hechi Industry and Information Committee, Hechi 547000, China

Department of Nuclear Materials Science and Engineering, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China

State Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China

References (30)

Show source-provided references
1. Corrosion behaviour of Zn-Al-Mg coated steel sheet in sodium chloride-containing environment10.1016/j.corsci.2009.06.019 ↗
2. Corrosion resistance of zinc-magnesium coated steel10.1016/j.corsci.2007.03.032 ↗
3. Corrosion mechanism of model zinc-magnesium alloys in atmospheric conditions10.1016/j.corsci.2008.06.008 ↗
4. Corrosion products of hot-dip Zn-6%Al-3%Mg coated steel sheet subjected to atmospheric exposure10.2355/tetsutohagane1955.89.1_166 ↗
5. Corrosion performance of Zn-Al-Mg coatings in open and confined zones in conditions simulating automotive applications10.1002/maco.200905425 ↗
6. Corrosion resistance of hot dip Zn-Mg galvanized steel sheet10.2355/tetsutohagane1955.89.1_174 ↗
7. Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn-Mg coating on steel10.1016/j.corsci.2009.03.005 ↗
8. Zn-Al-Mg coatings: Thermodynamic analysis and microstructure related properties
9. Effects of Mg additions on surface morphology and corrosion resistance of hot-dipped Zn coatings10.4028/www.scientific.net/DDF.273-276.300 ↗
10. Nomura, H., Kimata, Y., and Kanai, H. (, January January). Corrosion resistance of prepainted Zn-11%Al-3%Mg-0.2%Si coated steel sheet. Proceedings of the Galvatech 2004 Conference, Chicago, IL, USA.
11. Chemistry of corrosion products on Zn-Al-Mg alloy coated steel10.1016/j.corsci.2010.05.044 ↗
12. The effect of magnesium additions on the microstructure and cut edge corrosion resistance of zinc aluminium alloy galvanised steel10.1016/j.corsci.2008.02.005 ↗
13. Morphology and crystal orientation on corrosion resistance of Mg thin films formed by PVD method onto Zn electroplated substrate10.1016/j.surfcoat.2008.06.149 ↗
14. Innovative steel strip coatings by means of PVD in a continuous pilot line: Process technology and coating development
15. Morphology and properties of hot dip Zn-Mg and Zn-Mg-Al alloy coatings on steel sheet10.1016/j.surfcoat.2010.10.006 ↗
16. Improvement in the corrosion resistance of zinc-plated steel by electrodeposition of magnesium from a molten salt10.2355/isijinternational.36.714 ↗
17. Inhibition of anodic dissolution of zinc-plated steel by electrodeposition of magnesium from a molten salt10.2355/isijinternational.37.55 ↗
18. Self-healing ability of zinc-plated steel coated with magnesium electrodeposited from a molten salt. Materials Transactions
19. Effects of aluminium in the Zn coating on electrode life in welding galvanized steel sheet10.1080/09507119609549057 ↗
20. Steel cathodic protection afforded by zinc, aluminium and zinc/aluminium alloy coatings in the atmosphere10.1016/j.surfcoat.2004.04.023 ↗
21. A thermodynamic description of the Al-Mg-Zn system10.1007/s11661-997-0104-8 ↗
22. Investigation of the corrosion behaviors of continuously hot-dip galvanizing Zn-Mg coating10.1016/j.surfcoat.2012.03.079 ↗
23. Comment on Mg-Zn (magnesium-zinc)10.1007/BF02667700 ↗
24. Effect of strip temperature on the formation of an Fe2Al5 inhibition layer during hot-dip galvanizing10.1016/j.scriptamat.2008.12.033 ↗
25. Effect of alloying element segregation on the work of adhesion of metallic coating on metallic substrate: Application to zinc coatings on steel substrates10.1016/j.surfcoat.2011.04.014 ↗
26. Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel10.1016/j.actamat.2012.02.003 ↗
27. Understanding corrosion via corrosion product characterization: II. Role of alloying elements in improving the corrosion resistance of Zn-Al-Mg coatings on steel10.1016/j.corsci.2011.03.016 ↗
28. In situ monitoring of the microstructural corrosion mechanisms of zinc-magnesium-aluminium alloys using time lapse microscopy10.1016/j.corsci.2011.02.043 ↗
29. Corrosion behaviour of magnesium/aluminium alloys in 3.5 wt % NaCl10.1016/j.corsci.2007.11.005 ↗
30. Air permeability of the artificially synthesized Zn-Al-Mg alloy rusts10.1016/j.corsci.2006.12.008 ↗