Effect of Laser Rescanning on the Characteristics and Residual Stress of Selective Laser Melted Titanium Ti6Al4V Alloy
Source abstract
Abstract
The titanium Ti6Al4V alloy has excellent properties, and is one of the most important and widely used metal materials in the field of modern high-tech. Selective laser melting (SLM) is an ideal process for the rapid prototyping of Ti6Al4V alloy components with complex structures, but the performances need to be further improved. In this paper, the relative density, hardness, and microstructure under different scanning conditions were first analyzed in order to clarify the role of rescanning process in improving the performances. Then, the effects of different scanning strategies on the residual stress were analyzed. The results show that the strategy of partition rescanning has the most significant effect on residual stress. Finally, the SLM experiments of aviation nozzle rings were carried out. The results show that the average residual stress of the Re-SLMed sample was reduced from 322 MPa to 254 MPa.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Jiangnan University, Wuxi 214122, China
Funding
the Ministry of Education’s Joint Fund for Pre-Research Project
References (30)
Show source-provided references
1. Fatigue crack growth behaviour in Ti6Al4V alloy specimens produced by selective laser melting10.1007/s10704-019-00417-2 ↗
2. Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes10.1016/j.msea.2017.06.016 ↗
3. The effect of strain rate on stress corrosion performance of Ti6Al4V alloy produced by additive manufacturing process10.1016/j.jmrt.2020.02.035 ↗
4. Effect of heat treatment on the corrosion resistance behavior of selective laser melted Ti6Al4V ELI10.1016/j.surfcoat.2020.125955 ↗
5. Han, J., Wu, M., and Duan, W. (2020). A Proposed Scan Strategy Used on SLM Inner Structure Part. Materials, 13.10.3390/ma13040937 ↗
6. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
7. Investigations on residual stresses and deformations in selective laser melting10.1007/s11740-009-0192-y ↗
8. Experimental comparison of residual stresses for a thermomechanical model for the simulation of selective laser melting
9. The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts10.1007/s11661-018-4653-9 ↗
10. Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review10.1016/j.ijmachtools.2018.01.003 ↗
11. Residual Stress within Metallic Model Made by Selective Laser Melting Process10.1016/S0007-8506(07)60677-5 ↗
12. Improvement of the bridge curvature method to assess residual stresses in selective laser melting
13. Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 606110.1016/j.ijheatmasstransfer.2014.09.014 ↗
14. In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V10.1016/j.msea.2017.04.033 ↗
15. Influence of Laser Processing Strategy and Remelting on Surface Structure and Porosity Development during Selective Laser Melting of a Metallic Material10.1007/s11661-019-05348-0 ↗
16. Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting10.1007/s00170-018-03272-y ↗
17. Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction10.1007/s00170-017-0697-z ↗
18. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts10.1108/13552541111156450 ↗
19. Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy10.1016/j.matchar.2019.02.010 ↗
20. Selective laser remelting of an additive layer manufacturing process on AlSi10Mg10.1016/j.rinp.2018.12.018 ↗
21. Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy10.1016/j.matchar.2018.03.033 ↗
22. Effect of rescanning cycles on the characteristics of selective laser melting of Ti6Al4V10.1016/j.optlastec.2019.105890 ↗
23. Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V10.1016/j.msea.2017.11.103 ↗
24. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
25. History of residual stresses during the production phases of AlSi10Mg parts processed by powder bed additive manufacturing technology10.1080/17452759.2017.1310439 ↗
26. Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation
27. Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) Alloy10.1007/PL00021868 ↗
28. Zhao, Z., Li, L., Bai, P., Jin, Y., Wu, L., Li, J., Guan, R.-G., and Qu, H.-Q. (2018). The Heat Treatment Influence on the Microstructure and Hardness of TC4 Titanium Alloy Manufactured via Selective Laser Melting. Materials, 11.10.3390/ma11081318 ↗
29. Phase transformations during cooling in α+β titanium alloys10.1016/S0921-5093(97)00802-2 ↗
30. Effect of overlap rate and pattern on residual stress in selective laser melting10.1016/j.ijmachtools.2019.103433 ↗