journal article·2013-11-21Open access

Comparative Analysis of the Oxygen Supply and Viability of Human Osteoblasts in Three-Dimensional Titanium Scaffolds Produced by Laser-Beam or Electron-Beam Melting

Anika Jonitz-Heincke, Jan Wieding, Christoph Schulze, Doris Hansmann, Rainer Bader

Materials· Volume 6· Issue 11

Abstract

Synthetic materials for bone replacement must ensure a sufficient mechanical stability and an adequate cell proliferation within the structures. Hereby, titanium materials are suitable for producing patient-individual porous bone scaffolds by using generative techniques. In this in vitro study, the viability of human osteoblasts was investigated in porous 3D Ti6Al4V scaffolds, which were produced by electron-beam (EBM) or laser-beam melting (LBM). For each examination, two cylindrical scaffolds (30 mm × 10 mm in size, 700 µm × 700 µm macropores) were placed on each other and seeded with cells. The oxygen consumption and the acidification in the center of the structures were investigated by means of microsensors. Additionally, the synthesis of pro-collagen type 1 was analyzed. On the LBM titanium scaffolds, vital bone cells were detected in the center and in the periphery after 8 days of cultivation. In the EBM titanium constructs, however, vital cells were only visible in the center. During the cultivation period, the cells increasingly produced procollagen type 1 in both scaffolds. In comparison to the periphery, the oxygen content in the center of the scaffolds slightly decreased. Furthermore, a slight acidification of the medium was detectable. Compared to LBM, the EBM titanium scaffolds showed a less favorable behavior with regard to cell seeding.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomechanics and Implant Technology Research Laboratory, Department of Orthopaedics, University Medicine Rostock, Doberaner Strasse 142, Rostock 18057, Germany

Department of Orthopaedic Surgery, Armed Forces Hospital Westerstede, Lange Str. 38, Westerstede 26655, Germany

References (28)

Show source-provided references
1. Bone substitution materials. Current status and prospects
2. Bridging posttraumatic bony defects. Established and new methods10.1007/s00113-006-1152-z ↗
3. Tissue engineering of bone. Integration and migration of human mesenchymal stem cells in colonized contructs in a murine model10.1007/s00132-004-0740-2 ↗
4. Problems at the donor site in autologous bone transplantation
5. Numerical evaluation of reduction of stress shielding between implant devices and bone10.1590/S1516-14392011005000043 ↗
6. Titanium-based biomaterials for preventing stress shielding between implant devices and bone10.1155/2011/836587 ↗
7. Bone ingrowth in porous titanium implants produced by 3D fiber deposition10.1016/j.biomaterials.2007.02.020 ↗
8. The effect of structural design on mechanical properties and cellular response of additive manufactured titanium scaffolds10.3390/ma5081336 ↗
9. Titanium scaffolds for osteointegration: mechanical, in vitro and corrosion behaviour10.1007/s10856-006-0052-7 ↗
10. Wieding, J., Fritsche, A., Heinl, P., Korner, C., Cornelsen, M., Seitz, H., Mittelmeier, W., and Bader, R. (2013). Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium under different loading conditions. J. Appl Biomater. Funct. Mater.10.5301/JABFM.2013.10832 ↗
11. The osteoblastic differentiation of dental pulp stem cells and bone formation on different titanium surface textures10.1016/j.biomaterials.2010.01.056 ↗
12. Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming10.1016/j.biomaterials.2005.07.041 ↗
13. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
14. Tissue engineering von Knochen- und Knorpelgewebe: D.ie Bedeutung von Sauerstoff und Hypoxie10.1515/BIOMAT.2004.5.1.34 ↗
15. The roles of hypoxia in the in vitro engineering of tissues10.1089/ten.2006.0417 ↗
16. Oxygen gradients in tissue-engineered PEGT/PBT cartilaginous constructs: Measurement and modeling10.1002/bit.20038 ↗
17. Hypoxia in static and dynamic 3D culture systems for tissue engineering of bone10.1089/ten.tea.2007.0231 ↗
18. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
19. Engineering principles of clinical cell-based tissue engineering10.2106/00004623-200407000-00029 ↗
20. Migration capacity and viability of human primary osteoblasts in synthetic three-dimensional bone scaffolds made of tricalciumphosphate10.3390/ma4071249 ↗
21. Evaluation of titanium alloys fabricated using rapid prototyping technologies-electron beam cutting and laser beam melting10.3390/ma4101776 ↗
22. Vanadate induces p53 transactivation through hydrogen peroxide and causes apoptosis10.1074/jbc.M005366200 ↗
23. Zhang, Z., Huang, C., Li, J., Leonard, S.S., Lanciotti, R., Butterworth, L., and Shi, X. (2001). Vanadate-induced cell growth regulation and the role of reactive oxygen species. Arch. Biochem Biophys., 311–320.10.1006/abbi.2001.2464 ↗
24. Williams, D.F. (1981). Biocompatibility of Clinical Implant. Materials I, CRC Press.
25. Response of human endothelial cells to oxidative stress on Ti6Al4V alloy10.1016/j.biomaterials.2006.09.033 ↗
26. The potential role of human osteoblasts for periprosthetic osteolysis following exposure to wear particles
27. Hypoxia regulates PGE(2) release and EP1 receptor expression in osteoblastic cells10.1002/jcp.21017 ↗
28. Hypoxia inhibits the growth, differentiation and bone-forming capacity of rat osteoblasts10.1016/j.yexcr.2006.02.007 ↗