The Effect of Ultrasonic Peening Treatment on Fatigue Performance of Welded Joints
Source abstract
Abstract
Ultrasonic peening treatment (UPT) as a method of severe plastic deformation was used to treat cruciform welded joints of Q345 steel. The application of UPT achieves material surface nanocrystallization of the peening zone, reduces stress concentration, and produces residual compressive stresses at the welded toe. Micro-structure, hardness, stress relief, S-N curve, and the fatigue fracture mechanism of cruciform welded joint of Q345 steel, both before and after UPT, were analyzed in detail. The main results show that: stress concentration and residual tensile stress are the main reasons to reduce fatigue strength of cruciform welded joints. The fatigue life of cruciform welded joints is improved for surface hardening, compressive stress, and grain refinement by UPT. Residual compressive stress caused by UPT is released with the increase of fatigue life. A very significant fatigue strength improvement happens when UPT is replenished repeatedly after a certain number of cycles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun 130025, China
School of Mechanical Science and Engineering, Jilin University, Changchun 130025, China
References (24)
Show source-provided references
1. Evaluation of fatigue strength improvement by CFRP laminates and shot peening onto the tension flanges joining corrugated steel webs10.3390/ma8085248 ↗
2. Fatigue behaviour of G20Mn5QT cast steel and butt welds with Q345B steel10.1007/s13296-016-3020-1 ↗
3. A structural stress-based critical plane method for multiaxial fatigue life estimation in welded joints10.1111/ffe.12369 ↗
4. A new proposal for assessment of the fatigue strength of steel butt-welded joints improved by peening (HFMI) under constant amplitude tensile loading10.1111/ffe.12377 ↗
5. Development of high frequency tungsten inert gas welding method10.1016/j.matdes.2012.07.054 ↗
6. Fatigue resistance of welded details enhanced by ultrasonic impact treatment (UIT)10.1016/S0142-1123(03)00151-8 ↗
7. Assessment of improvement techniques effect on fatigue behaviour of friction stir welded aerospace aluminium alloys10.1016/j.proeng.2010.03.173 ↗
8. Fatigue Behaviour of Welded Joints, Repaired by Hammer Peening10.1111/j.1460-2695.2004.00777.x ↗
9. Investigation of the fatigue behaviour of the welded joints treated by TIG dressing and ultrasonic peening under variable-amplitude load10.1016/j.ijfatigue.2004.05.009 ↗
10. Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures10.1016/j.ijfatigue.2003.08.020 ↗
11. Fatigue of steel fillet welds hammer peened under load
12. Fatigue behavior of welded joint spray fused by nickel-base alloy powder10.1016/j.jmatprotec.2011.06.025 ↗
13. Fatigue behaviour of friction stir-welded joints repaired by grinding10.1007/s11665-014-0875-1 ↗
14. Study of the Fatigue Behaviour in Welded Joints of Stainless Steels Treated by Weld Toe Grinding and Subjected to Salt Water Corrosion10.1016/j.ijfatigue.2007.04.011 ↗
15. Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys10.1179/026708408X334087 ↗
16. A Review of Fatigue Behavior in Nanocrystalline Metals10.1007/s11340-009-9301-2 ↗
17. Effect of surface nanocrystallization method on fatigue strength of TA210.4028/www.scientific.net/MSF.620-622.545 ↗
18. Fatigue behavior of notched steel specimens with nanocrystallized surface obtained by severe shot peening10.1016/j.matdes.2012.09.025 ↗
19. Nitriding duration reduction without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of surface nano-crystallization by prior severe shot peening10.1016/j.matdes.2013.10.015 ↗
20. Influence of shot peening and hard chromium electroplating on the fatigue strength of 7050-T7451 aluminum alloy10.1016/j.ijfatigue.2006.10.003 ↗
21. Analysis of the S–N curves of welded joints enhanced by ultrasonic peening treatment10.1016/j.matdes.2010.06.030 ↗
22. A review of ultrasonic peening treatment10.1016/j.matdes.2015.08.102 ↗
23. Influence of re-ultrasonic impact treatment on fatigue behaviors of S690QL welded joints10.1016/j.ijfatigue.2014.03.024 ↗
24. Optimization of the fatigue resistance of AISI304 stainless steel by ultrasonic impact treatment10.1016/j.ijfatigue.2013.12.003 ↗