journal article·2019-10-23Open access

Flame Spraying of Aluminum Coatings Reinforced with Particles of Carbonaceous Materials as an Alternative for Laser Cladding Technologies

Artur Czupryński

Materials· Volume 12· Issue 21

Abstract

The article presents results of the preliminary research of mechanical properties of flame-sprayed aluminum coatings reinforced with carbon materials made on the construction steel S235J0 substrate. For reinforcement the following carbon materials were used: carbon nanotubes Nanocyl NC 7000 (0.5 wt.% and 1 wt.%) and carburite (0.5 wt.%). The properties evaluation was made using metallographic macroscope and microscope, chemical composition, microhardness, abrasion and erosion resistance studies. The obtained results were compared with aluminum powder coatings (EN AW 1000 series). It was proved that the flame spraying of aluminum coatings reinforced with particles of carbonaceous materials can be an effective alternative for laser cladding technology. The preliminary test results will be successively extended by further experiments to contribute in the near future to develop innovative technologies, that can be implemented in the automotive industry for production of components with high strength, wear resistance, good thermal conductivity and low density, such as brake shoes, cylinder liners, piston rings and gears.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings · Tribology and Wear Analysis · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Welding Department, Faculty of Mechanical Engineering, Silesian University of Technology, ul. Konarskiego 18A, 44-100 Gliwice, Poland

References (46)

Show source-provided references
1. Composite materials after seventy years10.1007/s10853-006-6569-9 ↗
2. Metal-matrix composites for space applications10.1007/s11837-001-0139-z ↗
3. Metal-matrix composites for liquid rocket engines10.1007/s11837-001-0140-6 ↗
4. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
5. Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites10.1016/j.carbon.2006.02.038 ↗
6. Overview of trends in advanced composite research and applications in Japan10.1163/156855106776829383 ↗
7. Multiwall carbon nanotube elastomeric composites. A review10.1016/j.polymer.2007.06.046 ↗
8. CNT-reinforced ceramics and metals10.1016/S1369-7021(04)00508-5 ↗
9. A Finite Element Study of Crack Behavior for Carbon Nanotube Reinforced Bone Cement10.4236/wjm.2013.35A003 ↗
10. Carbon nanotube reinforced aluminum composite coating via cold spraying10.1016/j.surfcoat.2008.05.042 ↗
11. Structural transformations in carbon nanotubes during thermal spray processing10.1016/j.surfcoat.2009.02.013 ↗
12. Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing10.1016/j.jmatprotec.2011.03.007 ↗
13. Carbon nanotube evolution in aluminum matrix during composite fabrication process10.4028/www.scientific.net/MSF.690.294 ↗
14. Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes10.1016/j.matchar.2005.05.003 ↗
15. Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders10.1016/j.surfcoat.2008.12.004 ↗
16. A new technique for dispersion of carbon nanotube in a metal melt10.1016/j.msea.2010.05.005 ↗
17. Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites10.1016/j.msea.2010.03.049 ↗
18. Buckling analysis of multi-walled carbon nanotubes: A continuum model accounting for van der Waals interaction10.1016/j.jmps.2004.08.003 ↗
19. The effect of van der Waals-based interface cohesive law on carbon nanotube-reinforced composite materials10.1016/j.compscitech.2007.05.016 ↗
20. Statistical Modelling of the Particle Size Composition of an Alumina Matrix for No-Cement Self-Flowing Refractory Castables10.4028/www.scientific.net/MSF.514-516.604 ↗
21. Mechanical Characterization of Composites with Embedded Optical Fibers10.1177/0021998305050423 ↗
22. Properties of Al2O3/TiO2 and ZrO2/CaO flame-sprayed coatings10.17222/mit.2015.165 ↗
23. Testing of flame sprayed Al2O3 matrix coatings containing TiO210.1515/amm-2016-0224 ↗
24. Examining properties of arc sprayed nanostructured coatings
25. Adamiak, M., Czuprynski, A., Kopysc, A., Monica, Z., Olender, M., and Gwiazda, A. (2018). The Properties of Arc-Sprayed Aluminum Coatings on Armor-Grade Steel. Metals, 8.10.3390/met8020142 ↗
26. Mechanisms of hardness increase for composite surface layers during laser gas nitriding of the Ti6A14V alloy10.17222/mit.2016.106 ↗
27. Erosion wear resistance of Titanium-Matrix Composite Ti/TiN produced by diode-laser gas nitriding10.17222/mit.2015.160 ↗
28. Tribological characteristic of titanium alloy surface layers produced by diode laser gas nitriding10.1515/amm-2016-0094 ↗
29. Comparison of Titanium Metal Matrix Composite surface layers produced during laser gas nitriding of Ti6Al4V alloy by different types of lasers10.1515/amm-2016-0287 ↗
30. Titanium Matrix Composite Ti/TiN Produced by Diode Laser Gas Nitriding10.3390/met5010054 ↗
31. The study of properties of Ni-W2C and Co-W2C powders thermal sprayed deposits10.1016/j.jmatprotec.2005.02.198 ↗
32. Surface-layer’s structure of X40CrMoV5-1 steel remelted and/or WC alloyed with HPDL laser10.4028/www.scientific.net/MSF.437-438.69 ↗
33. The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders10.1016/j.jmatprotec.2005.04.050 ↗
34. Synthesis and characterization of plasma spray formed carbon nanotube reinforced aluminum composite10.1016/j.msea.2004.04.014 ↗
35. Thermal spraying (2018). Pre-Treatment of Surfaces of Metallic Parts and Components for Thermal Spraying, CEN. EN 13507.
36. (2017). Thermal Spraying—Zinc, Aluminium and Their Alloys—Part 1: Design Considerations and Quality Requirements for Corrosion Protection Systems, ISO. ISO 2063-1.
37. Experimental and theoretical studies on the droplet temperature behavior of R407C two-phase flashing spray10.1016/j.ijheatmasstransfer.2019.03.042 ↗
38. An experimental study on the spray and thermal characteristics of R134a two-phase flashing spray10.1016/j.ijheatmasstransfer.2012.04.021 ↗
39. (2005). Thermal Spraying—Characterization and Testing of Thermally Sprayed Coatings, ISO. ISO 14923.
40. (2018). Metallic Materials—Vickers Hardness Test—Part 1: Test Method, ISO. ISO 6507.
41. (2000). Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets, ASTM. ASTM G76-95.
42. (2000). Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus, ASTM. ASTM G65-00.
43. Thermal stability of carbon nanotubes probed by anchored tungsten nanoparticles10.1088/1468-6996/12/4/044605 ↗
44. Development of methods of carbon nanotubes input to weld pool
45. Lide, D.R. (2003). CRC Handbook of Chemistry and Physics, CRC Press. [85th ed.].
46. Gaskell, D.R. (2017). Introduction to the Thermodynamics of Materials, Taylor & Francis. [4th ed.].