journal article·2016-01-26Open access

Electrochemical Properties of LLTO/Fluoropolymer-Shell Cellulose-Core Fibrous Membrane for Separator of High Performance Lithium-Ion Battery

Fenglin Huang, Wenting Liu, Peiying Li, Jinxia Ning, Qufu Wei

Materials· Volume 9· Issue 2

Abstract

A superfine Li0.33La0.557TiO3 (LLTO, 69.4 nm) was successfully synthesized by a facile solvent-thermal method to enhance the electrochemical properties of the lithium-ion battery separator. Co-axial nanofiber of cellulose and Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) was prepared by a co-axial electrospinning technique, in which the shell material was PVDF-HFP and the core was cellulose. LLTO superfine nanoparticles were incorporated into the shell of the PVDF-HFP. The core–shell composite nanofibrous membrane showed good wettability (16.5°, contact angle), high porosity (69.77%), and super electrolyte compatibility (497%, electrolyte uptake). It had a higher ionic conductivity (13.897 mS·cm−1) than those of pure polymer fibrous membrane and commercial separator. In addition, the rate capability (155.56 mAh·g−1) was also superior to the compared separator. These excellent performances endowed LLTO composite nanofibrous membrane as a promising separator for high-performance lithium-ion batteries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Eco-Textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China

References (28)

Show source-provided references
1. Preparation of advanced carbon anode materials from mesocarbon microbeads for use in high C-rate lithium ion batteries10.3390/ma8063550 ↗
2. Evaluation of a polymethylpentene fiber mat formed directly on an anode as a battery separator10.1016/j.memsci.2014.05.012 ↗
3. The high performances of SiO2/Al2O3-coated electrospun polyimide fibrous separator for lithium-ion battery10.1016/j.memsci.2015.06.016 ↗
4. Functional separator consisted of polyimide nonwoven fabrics and polyethylene coating layer for lithium-ion batteries10.1016/j.jpowsour.2015.08.008 ↗
5. Novel nanocomposite materials for advanced Li-ion rechargeable batteries10.3390/ma2031205 ↗
6. Polyethylene-supported polyvinylidene fluoride–cellulose acetate butyrate blended polymer electrolyte for lithium ion battery10.1016/j.jpowsour.2012.10.078 ↗
7. Cellulose/Polysulfonamide Composite Membrane as a High Performance Lithium-Ion Battery Separator10.1021/sc400370h ↗
8. A composite membrane based on a biocompatible cellulose as a host of gel polymer electrolyte for lithium ion batteries10.1016/j.jpowsour.2014.07.058 ↗
9. Effect of the degree of porosity on the performance of poly (vinylidene fluoride-trifluoroethylene)/poly (ethylene oxide) blend membranes for lithium-ion battery separators10.1016/j.ssi.2015.08.003 ↗
10. PVDF-HFP/ether-modified polysiloxane membranes obtained via airbrush spraying as active separators for application in lithium ion batteries10.1039/C5CC04424C ↗
11. Electrospun polyimide-composite separator for lithium-ion batteries10.1016/j.electacta.2015.04.142 ↗
12. Polymethylmethacrylate/Polyacrylonitrile Membranes via Centrifugal Spinning as Separator in Li-Ion Batteries10.3390/polym7040629 ↗
13. Coaxial Electrospun Cellulose-Core Fluoropolymer-Shell Fibrous Membrane from Recycled Cigarette Filter as Separator for High Performance Lithium-Ion Battery10.1021/acssuschemeng.5b00032 ↗
14. A Highly Thermostable Ceramic-Grafted Microporous Polyethylene Separator for Safer Lithium-Ion Batteries10.1021/acsami.5b07230 ↗
15. Layer-by-Layer Deposition of Organic-Inorganic Hybrid Multilayer on Microporous Polyethylene Separator to Enhance the Electrochemical Performance of Lithium-Ion Battery10.1021/acsami.5b05457 ↗
16. A High-Energy-Density Mixed-Aprotic-Aqueous Sodium-Air Cell with a Ceramic Separator and a Porous Carbon Electrode10.1149/2.0421507jes ↗
17. A rechargeable lithium-air battery using a lithium ion-conducting lanthanum lithium titanate ceramics as an electrolyte separator10.1016/j.jpowsour.2012.11.098 ↗
18. Stability of a Pyrrolidinium-Based Ionic Liquid in Li-O2 Cells10.1149/2.1131412jes ↗
19. Preparation and electrochemical characterization of ionic-conducting lithium lanthanum titanate oxide/polyacrylonitrile submicron composite fiber-based lithium-ion battery separators10.1016/j.jpowsour.2010.06.088 ↗
20. Electrospun Nanofiber-Based Anodes, Cathodes, and Separators for Advanced Lithium-Ion Batteries10.1080/15583724.2011.593390 ↗
21. Investigations on pure and Ag doped lithium lanthanum titanate (LLTO) nanocrystalline ceramic electrolytes for rechargeable lithium-ion batteries10.1016/j.ceramint.2012.07.011 ↗
22. Enhanced electrochemical performance of LiFePO4 coated with Li0.34La0.51TiO2.94 by rheological phase reaction method10.1016/j.mseb.2013.08.014 ↗
23. Lithium storage in perovskite lithium lanthanum titanate10.1016/j.elecom.2013.03.038 ↗
24. Interface reaction and its effect on the performance of a CO2 gas sensor based on Li0.35La0.55TiO3 electrolyte and Li2CO3 sensing electrode10.1016/j.snb.2013.02.104 ↗
25. Effect of sintering temperature on microstructure and transport properties of Li3xLa2/3−xTiO3 with different lithium contents10.1016/j.electacta.2010.06.031 ↗
26. Synthesis of Fine Powders of Li3x La2/3-x TiO3 Perovskite by a Polymerizable Precursor Method10.1021/cm049869x ↗
27. Sol–gel preparation and characterization of perovskite lanthanum lithium titanate10.1007/s10853-006-0683-6 ↗
28. Peculiarities of Li0.5La0.5TiO3 Formation During the Synthesis by Solid-State Reaction or Precipitation from Solutions10.1021/cm034820x ↗