Show source-provided references
1. Michalak, M., Sokołowski, P., Szala, M., Walczak, M., Łatka, L., Toma, F.L., and Björklund, S. (2021). Wear Behavior Analysis of Al2O3 Coatings Manufactured by APS and HVOF Spraying Processes Using Powder and Suspension Feedstocks. Coatings, 11.
10.3390/coatings11080879 ↗6. Spark Plasma Sintering of WC–10Co Nanopowders with Various Carbon Content Obtained by Plasma-Chemical Synthesis
10.1134/S207511332102009X ↗9. Influence of 13 wt.% TiO2 content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings
10.1016/j.surfcoat.2021.126979 ↗10. Structure and physicomechanical properties of nanostructured (TiHfZrNbVTa)N coatings after implantation of high fluences of N+ (1018 cm−2)
10.12693/APhysPolA.132.217 ↗11. Szala, M., Łatka, L., Awtoniuk, M., Winnicki, M., and Michalak, M. (2020). Neural modelling of APS thermal spray process parameters for optimizing the hardness, porosity and cavitation erosion resistance of Al2O3-13 wt.% TiO2 coatings. Processes, 8.
10.20944/preprints202011.0200.v1 ↗12. Optimisation of the high velocity oxygen fuel (HVOF) parameters to produce effective corrosion control coatings on AZ91 magnesium alloy
10.1002/maco.201407982 ↗15. Koch, C.C. (2007). Nanocrystalline Powder Consolidation Methods. Nanostructured Materials, William Andrew Publishing. [2nd ed.].
16. Impact of pressure in static and dynamic pressing of ultrafine plasmochemical ZrO2 (Y)-Al2O3 powders on compact density and compaction efficiency during sintering
10.1016/j.ceramint.2018.07.285 ↗20. Gevorkyan, E., Lavrynenko, S., Rucki, M., Siemiątkowski, Z., and Kislitsa, M. (2017, January 11–15). Preparation of nanostructured materials by electrical sintering. Proceedings of the 7th International Conference M2D2017, Albufeira, Portugal.
21. Ceramic nanopowders sintering
22. Gevorkyan, E., Rucki, M., Sałaciński, T., Siemiątkowski, Z., Nerubatskyi, V., Kucharczyk, W., Chrzanowski, J., Gutsalenko, Y., and Nejman, M. (2021). Feasibility of Cobalt-Free Nanostructured WC Cutting Inserts for Machining of a TiC/Fe Composite. Materials, 14.
10.3390/ma14123432 ↗23. National Standard ДCTУ 3305.4-96 (ГOCT 2642.4-97) Refractories and Refractory Raw Materials. Methods for Determination of Alumina, (In Ukrainian).
24. Cullen, M. (2003). Atomic Spectroscopy in Elemental Analysis, CRC Press.
25. Fang, Z.Z. (2010). Fundamentals and applications of field/current assisted sintering. Sintering of Advanced Materials, Woodhead Publishing.
10.1533/9781845699949 ↗28. Prediction and control of microstructure evolution for sub-microscale α-Al2O3 during low-heating-rate sintering based on the master sintering curve theory
10.1016/j.jeurceramsoc.2008.06.003 ↗29. Sintering forces acting among particles during sintering by grain-boundary/surface diffusion
10.1111/jace.15716 ↗30. Peculiarities of the neck growth process during initial stage of spark-plasma, microwave and conventional sintering of WC spheres
10.1016/j.jallcom.2012.01.146 ↗31. Uskokovic, D.P., Hayne, P., and Spriggs, R.M. (1989). Ultra–Rapid Sintering of Ceramics. Science of Sintering: New Direction for Materials Processing and Microstructural Control, Springer.
33. German, R.M. (2014). Sintering: From Empirical Observations to Scientific Principles, Butterworth-Heinemann.
34. Pokhodnya, I.K. (1998). Sintering of powder materials at electrothermal, plasma and laser heating. Modern Material Science in 21st Century, Naukova dumka. (In Russian).
35. Zhang, J.S. (2010). High Temperature Deformation and Fracture of Materials, Woodhead Publishing.
10.1533/9780857090805 ↗38. Current understanding and future research directions at the onset of the next century of sintering science and technology
10.1111/jace.14919 ↗39. Identification of densification mechanisms of pressure-assisted sintering: Application to hot pressing and spark plasma sintering of alumina
10.1007/s10853-014-8804-0 ↗40. Computational microstructure-based analysis of residual stress evolution in metal-matrix composite materials during thermomechanical loading
10.22190/FUME201228011B ↗45. Gevorkyan, E., Rucki, M., Panchenko, S., Sofronov, D., Chałko, L., and Mazur, T. (2020). Effect of SiC addition to Al2O3 ceramics used in cutting tools. Materials, 3.
10.3390/ma13225195 ↗46. Developing new nanostructure materials on alumina base
47. Semchenko, G.D. (2000). Engineering Ceramics and Heat Resistant Materials, Shtrikh.