journal article·2021-05-29Open access

Mechanical Properties and Toxicity Risks of Lead-Zinc Sulfide Tailing-Based Construction Materials

Yang Zhou, Xinlian Duan, Tao Chen, Bo Yan, Lili Li

Materials· Volume 14· Issue 11

Abstract

The leaching residue of the lead–zinc sulfide tailing (LRT) is the only residue generated from the tailing leaching recovery process; it is a typical hazardous material for its high heavy-metal contents and high acidity. Due to the large output of LRT, and because its main components are Ca, Si, and Al, the preparation of building construction materials with LRT was studied. The results showed that when the LRT addition is less than 47%, with the ordinary Portland cement (OPC) and fly ash (FA) added and the curing conditions appropriate, the strength values of the tested specimens meet the M15 Class of the autoclaved lime sand brick standard (GB/T 16753-1997). The carbonization coefficient and drying shrinkage of the specimen were 0.79 and smaller than 0.42, respectively. As the SEM, TG, and XRD analysis have shown, the LRT can chemically react with additives to form stable minerals. The heavy metal contents that were leached out well met the limits in GB5085.3-2007. Based on the high addition of the LRT, the good strength and lower heavy metals were leached out of the prepared test specimen, and the tailing could be reused completely with the leaching recovery and the LRT reuse process. LRT can be used to replace OPC, allowing more sustainable concrete production and improved ecological properties of LRT.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China

University of Chinese Academy of Sciences, Beijing 510049, China

School of Environment, South China Normal University, University Town, Guangzhou 510631, China

Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, SCNU Environmental Research Institute, South China Normal University, Guangzhou 510631, China

College of Environmental Science and Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou 510408, China

Funding

the National Key Research and Development Plan Project · Guangdong Science and Technology Program key projects · Guangdong Natural Science Foundation · Provincial Science and Technology Plan Project of Guangdong Province

References (36)

Show source-provided references
1. Preparation and adsorption characteristics for heavy metals of active silicon adsorbent from leaching residue of lead-zinc tailings10.1007/s11356-018-2194-9 ↗
2. Basic Leaching Behavior of Mechanically Activated Zinc Plant Residue10.1007/s12666-019-01687-z ↗
3. Investigation of zinc extraction from different leach residues by acid leaching10.1007/s13762-017-1365-4 ↗
4. Investigation of Solid Residues Obtained After Oxidized Nickel Ore Leaching10.1007/s11015-019-00900-0 ↗
5. Silver leaching and recovery of valuable metals from magnetic tailings using chloride leaching10.1016/j.jclepro.2018.01.243 ↗
6. Extraction of copper from copper and cadmium residues of zinc hydrometallurgy by oxidation acid leaching and cyclone electrowinning10.1016/j.mineng.2018.09.007 ↗
7. Mineralogical, Chemical, and Leaching Characteristics of Coal Combustion Bottom Ash from a Power Plant Located in Northern Poland
8. Stabilization/Solidification Treatment of Cadmium-Bearing-Residue with Magnesium Slag10.15244/pjoes/99906 ↗
9. Thallium pollution in China and removal technologies for waters: A review10.1016/j.envint.2019.01.076 ↗
10. Metal recovery from the copper sulfide tailing with leaching and fractional precipitation technology10.1016/j.hydromet.2014.05.018 ↗
11. The recovery of Zn and Pb and the manufacture of lightweight bricks from zinc smelting slag and clay10.1016/j.jhazmat.2014.01.035 ↗
12. Thallium isotopic fractionation in industrial process of pyrite smelting and environmental implications10.1016/j.jhazmat.2019.121378 ↗
13. Simultaneous stabilization/solidification of Mn2+ and NH4+-N from electrolytic manganese residue using MgO and different phosphate resource10.1016/j.ecoenv.2017.10.027 ↗
14. Extraction of vanadium from V-Cr bearing reduced residue by selective oxidation combined with alkaline leaching10.1080/00084433.2018.1491161 ↗
15. Leaching of the potentially toxic pollutants from composites based on waste raw material10.2298/CICEQ111128013T ↗
16. Thallium contamination in farmlands and common vegetables in a pyrite mining city and potential health risks10.1016/j.envpol.2019.02.092 ↗
17. Preparation and characterization of cement treated road base material utilizing electrolytic manganese residue10.1016/j.jclepro.2019.05.352 ↗
18. Preparation of non-sintered permeable bricks using electrolytic manganese residue: Environmental and NH3-N recovery benefits10.1016/j.jhazmat.2019.120768 ↗
19. Preparation and characteristics of steam-autoclaved bricks produced from electrolytic manganese solid waste10.1016/j.conbuildmat.2013.09.055 ↗
20. Preparation of fired bricks as construction materials by replacing clay with municipal incinerator residue slag
21. (2021, May 28). The Autoclaved lime Sand Brick Strength Standard. Available online: http://c.gb688.cn/bzgk/gb/showGb?type=online&hcno=A5A2963C2937FE381150BCDC004E2223.
22. Effect of Partial Replacement of Ground Granulated Blast Furnace Slag with Sugarcane Bagasse Ash as Source Material in the Production of Geopolymer Concrete
23. Utilization of tailings from tungsten mine waste as a substitution material for cement10.1016/j.conbuildmat.2009.02.006 ↗
24. Gong, B., Deng, Y., Yang, Y., Tan, S.N., Liu, Q., and Yang, W. (2017). Solidification and Biotoxicity Assessment of Thermally Treated Municipal Solid Waste Incineration (MSWI) Fly Ash. Int. J. Environ. Res. Public Health, 14.10.3390/ijerph14060626 ↗
25. Li, X., Li, K., Sun, Q., Liu, L., Yang, J., and Xue, H. (2021). Preparation of Cemented Oil Shale Residue–Steel Slag–Ground Granulated Blast Furnace Slag Backfill and Its Environmental Impact. Materials, 14.10.3390/ma14082052 ↗
26. Advanced Ceramics from Preceramic Polymers Modified at the Nano-Scale: A Review10.3390/ma7031927 ↗
27. Chemical activation of blended cements made with lime and natural pozzolans10.1016/0008-8846(93)90076-L ↗
28. Flue gas desulfurization (FGD) fly ash as a sustainable, safe alternative for cement-based materials10.1016/j.jclepro.2020.124646 ↗
29. Properties of stabilized/solidified admixtures of cement and sewage sludge10.1016/j.cemconcomp.2006.08.005 ↗
30. (2021, May 28). Identification Standards for Hazardous Wastes Identification of Leaching Toxicity. Available online: http://www.doc88.com/p-73740941407.html.
31. Solidification/stabilization mechanism of Pb(II), Cd(II), Mn(II) and Cr(III) in fly ash based geopolymers10.1016/j.conbuildmat.2017.12.006 ↗
32. Influence of fine tailings on polyester mortar properties10.1016/j.conbuildmat.2005.12.021 ↗
33. Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete10.1016/j.cemconcomp.2004.05.002 ↗
34. Innovative methodology for comprehensive utilization of iron ore tailings: Part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material10.1016/j.jhazmat.2009.09.019 ↗
35. Microstructural Characterisation and Wear Behaviour of Diamond Composite Materials10.3390/ma3021390 ↗
36. Effect of sintering temperature on mineral composition and heavy metals mobility in tailings bricks10.1016/j.wasman.2019.04.001 ↗