journal article·2022-05-05Open access

Manufacturing of a Magnetic Composite Flexible Filament and Optimization of a 3D Printed Wideband Electromagnetic Multilayer Absorber in X-Ku Frequency Bands

Christophe Vong, Alexis Chevalier, Azar Maalouf, Julien Ville, Jean-François Rosnarho, Vincent Laur

Materials· Volume 15· Issue 9

Abstract

With the multiplication of electronic devices in our daily life, there is a need for tailored wideband electromagnetic (EM) absorbers that could be conformed on any type of surface-like antennas for interference attenuation or military vehicles for stealth applications. In this study, a wideband flexible flat electromagnetic absorber compatible with additive manufacturing has been studied in the X-Ku frequency bands. A multilayer structure has been optimized using a genetic algorithm (GA), adapting the restrictions of additive manufacturing and exploiting the EM properties of loaded and non-loaded filaments, of which the elaboration is described. After optimization, a bi-material multilayer absorber with a thickness of 4.1 mm has been designed to provide a reflectivity below −12 dB between 8 and 18 GHz. Finally, the designed multilayer structure was 3D-printed and measured in an anechoic chamber, achieving −11.8 dB between 7 and 18 GHz. Thus, the development of dedicated materials has demonstrated the strong potential of additive technologies for the manufacturing of thin wideband flexible EM absorbers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Antenna and Metasurface Technologies · Electromagnetic wave absorption materials · Antenna Design and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University Brest, Lab-STICC, UMR 6285, CNRS, 29200 Brest, France

University Brest, IRDL, UMR 6027, CNRS, 29200 Brest, France

SIEPEL Cegelec Defense, 56470 La Trinité-sur-Mer, France

References (22)

Show source-provided references
1. Knott, E.F., Schaeffer, J.F., and Tulley, M.T. (2004). Radar Cross Section, SciTech Publishing.10.1049/SBRA026E ↗
2. Electromagnetic Environmental Impact of Power Electronics Equipment10.1109/5.931490 ↗
3. Arbaoui, Y., Laur, V., Maalouf, A., and Queffelec, P. (2015, January 17–22). 3D printing for microwave: Materials characterization and application in the field of absorbers. Proceedings of the 2015 IEEE MTT-S International Microwave Symposium IEEE, Phoenix, AZ, USA.10.1109/MWSYM.2015.7166769 ↗
4. A low-frequency model for wedge or pyramid absorber arrays-II: Computed and measured results10.1109/15.328860 ↗
5. Gradient multilayer structural design of CNTs/SiO2 composites for improving microwave absorbing properties10.1016/j.matdes.2010.12.043 ↗
6. Theory, design and perspectives of electromagnetic wave absorbers10.1109/MEMC.0.7543954 ↗
7. Chew, W.C. (1995). Waves and Fields in Inhomogeneous Media, IEEE Press.
8. Design of lightweight, broad-band microwave absorbers using genetic algorithms10.1109/22.238519 ↗
9. Particle swarm optimization for optimal design of broadband multilayer microwave absorber for wide angle of incidence10.2528/PIERB14122602 ↗
10. Chevalier, A., and Laur, V. (2017, January 4–9). Composites-based microwave absorbers: Toward a unified model. Proceedings of the 2017 IEEE MTT-S International Microwave Symposium (IMS), Honololu, HI, USA.10.1109/MWSYM.2017.8059000 ↗
11. Ultra-wideband polarization-insensitive and wide-angle thin absorber based on resistive metasurfaces with three resonant modes10.1063/1.4997468 ↗
12. Controlled reduction of graphene oxide laminate and its applications for ultra-wideband microwave absorption10.1016/j.carbon.2019.12.062 ↗
13. Ultrawideband electromagnetic metamaterial absorber utilizing coherent absorptions and surface plasmon polaritons based on double layer carbon metapatterns10.1038/s41598-021-02303-1 ↗
14. Ultra-broadband metamaterial absorber with graphene composites fabricated by 3D printing10.1016/j.matlet.2018.12.087 ↗
15. Ren, J., and Yin, J.Y. (2018). 3D-Printed Low-Cost Dielectric-Resonator-Based Ultra-Broadband Microwave Absorber Using Carbon-Loaded Acrylonitrile Butadiene Styrene Polymer. Materials, 11.10.3390/ma11071249 ↗
16. Perforated lightweight broadband metamaterial absorber based on 3-D printed honeycomb10.1109/LAWP.2018.2876023 ↗
17. Correlation between the microstructure and the electromagnetic properties of carbonyl iron filled polymer composites10.1016/j.compositesa.2007.08.002 ↗
18. Baker-Jarvis, J.R., Janezic, M.D., Riddle, B.F., Johnk, R.T., Holloway, C.L., Geyer, R.G., and Grosvenor, C.A. (2005). Measuring the Permittivity and Permeability of Lossy Materials, NIST. Technical Note (NIST TN)-1536.
19. On the optimal design of multilayer microwave absorbers10.2528/PIERC10041310 ↗
20. (2022, April 11). Find Minimum of Function Using Genetic Algorithm—MATLAB ga. Available online: https://www.mathworks.com/help/gads/ga.html.
21. Versuch einer mathematischen Theorie der Koagulationskinetik kolloider Lösungen10.1515/zpch-1918-9209 ↗
22. Modelling of coalescence processes in fluid-liquid dispersions: A review of current understanding