Characterization of High-Temperature Superconductor Bulks for Electrical Machine Application
Source abstract
Abstract
High-temperature superconducting (HTS) bulks can be used in electrical applications. Experimental characterization of large-size HTS bulks is a tricky issue. The relevant parameters for their application were directly measured in this study. This paper has three main aims. Firstly, features of YBaCuO bulks are presented. Secondly, an electrical motor application is developed using magnetic field shielding and trapping. Thirdly, the HTS bulks are characterized. Several classical methods were used, which are mainly magnetic methods only available for small samples. The complete penetration magnetic field and the critical current density were found to be the main parameters relevant for applications. An innovative entire HTS bulk characterization method is presented. This characterization method is useful for end users and engineers to better implement HTS bulks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Physics of Superconductivity and Magnetism · Superconducting Materials and Applications · Frequency Control in Power Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Groupe de Recherche en Energie Electrique de Nancy (GREEN), Université de Lorraine, 54506 Vandoeuvre-lès-Nancy, France
Moscow Aviation Institute (MAI), 125993 Moscow, Russia
References (34)
Show source-provided references
1. Magnetization of high-field superconductors10.1103/RevModPhys.36.31 ↗
2. Critical persistent currents in hard superconductors10.1103/PhysRevLett.9.306 ↗
3. Magnetization of a cylindrical hard superconductor10.1088/0508-3443/16/11/306 ↗
4. Critical current density from magnetization loops of finite high-TC superconductors10.1088/0953-2048/14/7/304 ↗
5. Thin superconducting disk with B-dependent JC: Flux and current distributions10.1103/PhysRevB.60.13112 ↗
6. Kim model magnetization of type II superconductors10.1063/1.344261 ↗
7. Influence of annealing inoxygen and argon on the superconducting properties of Li-doped YBCO single-grain bulks10.1016/j.physc.2017.08.003 ↗
8. Relationship between local microstructure and superconducting properties of commercial YBa2Cu3O7−δbulk10.1088/1361-6668/ab714f ↗
9. Mawatari, Y., Sawa, A., Obara, H., Umeda, M., and Yamasaki, H. (1997). Field-sweep rate dependence of magnetization and current–voltage characteristics in superconducting disks. Appl. Phys. Lett., 70.10.1063/1.118842 ↗
10. Current voltage characteristics and flux creep in melt-textured YBaCuO10.1088/0953-2048/13/2/315 ↗
11. Magnetic and transport measurements on melt-textured DyBCO single domains10.1016/S0921-4534(02)00978-4 ↗
12. Review of the critical current densities and magnetic irreversibilities in high Tc superconductors
13. JC(B) determination method with the help of the virgin magnetization curve of a superconducting cylinder10.1109/TASC.2010.2042168 ↗
14. Demagnetizing factors for cylinders10.1109/20.102932 ↗
15. Influence of demagnetizing effects in superconducting cylinders10.1109/77.784904 ↗
16. Magnetic properties of finite superconducting cylinders, uniform applied field10.1103/PhysRevB.64.214506 ↗
17. Magnetic characterisation of large grain, bulk Y-Ba-Cu-O superconductor-soft ferromagnetic alloy hybrid structures10.1016/j.physc.2014.04.025 ↗
18. A New Direct Magnetic Method for Determining JC in Bulk Superconductors from Magnetic Field Diffusion Measurements10.1109/TASC.2011.2179409 ↗
19. Determination of JC and n-value of HTS Pellets by Measurement and Simulation of Magnetic Field Penetration10.1109/TASC.2015.2409201 ↗
20. Improved Method for determining the n-value of HTS bulks10.1109/TASC.2016.2533603 ↗
21. Determination of the Complete Penetration Magnetic Field of a HTS Pellet from the Measurements of the Magnetic Field at its Top-Center Surface10.1109/TASC.2018.2796380 ↗
22. Ginsberg, D.M. (1988). Physical Properties of High Temperature Superconductor, World Scientific.
23. A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel10.1088/0953-2048/27/8/082001 ↗
24. Experimental study of a new kind of superconducting inductor10.1109/TASC.2003.813055 ↗
25. Theoretical study of a new kind HTS motor10.1109/TASC.2005.849608 ↗
26. Analytical Model for the Magnetic Field Distribution in a Flux Modulation Superconducting Machine10.1109/TMAG.2019.2935696 ↗
27. High Temperature Superconductor Bulk Magnet that can trap magnetic fields of over 17 T at 29 K10.1038/nature01350 ↗
28. Comparaison berween modeling and experimental results of magnetic flux trapped10.1109/TASC.2016.2518580 ↗
29. Magnetization and Demagnetization Studies of an HTS Bulk in an Iron Core10.1109/TASC.2016.2517628 ↗
30. Improvement of the Magnetization of a Superconducting Bulk using an Iron Core10.1109/TASC.2014.2373494 ↗
31. Developments of superconducting motor with YBCO bulk magnets10.1016/S0921-4534(03)01213-9 ↗
32. Core Loss of a Bulk HTS Synchronous Machine at 2 and 3 T Rotor Magnetisation
33. An axial gap-type HTS bulk synchronous motor excited by pulsed-field magnetization with vortex-type armature copperwindings10.1109/TASC.2005.849617 ↗
34. The design, magnetization and control of a superconducting permanent magnet synchronous motor10.1088/0953-2048/21/6/065011 ↗