Acoustic Properties of Resonant Spruce Wood Modified Using Oil-Heat Treatment (OHT)
Source abstract
Abstract
Wedge-shaped boards of spruce wood (Picea abies Karst.) are used to make violin fronts, also known as soundboards. Oil-heat treatment (OHT) can influence the acoustic properties of resonant wood, such as spruce. In this study, the effect of OHT on spruce wood was evaluated, using palm oil as a heating medium, at four different temperatures: 140, 160, 180 and 200 °C. Physical, mechanical and acoustic properties of spruce wood were evaluated before and after OHT and included the following: density, modulus of elasticity in the static bending test, and wood sound velocity. The acoustic parameters after OHT improved; however, the samples bent after modification had a higher modulus of elasticity, with a simultaneous deterioration of the acoustic parameters. The dynamic modulus of elasticity increased by 11%, and the musical constant by 5%. The static modulus increased by more than 3.5%, but the acoustic parameters calculated on the basis of these results indicated a deterioration of the acoustic properties of completely oven-dried wood. The increase in moisture content to air-dried condition contributed to a slight increase in the mean musical constant at the highest modification temperature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Bamboo properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Wood Science and Thermal Technics, Faculty of Wood Technology, Poznań University of Life Sciences, Wojska Polskiego 38/42, 60-627 Poznań, Poland
Funding
Ministerstwo Nauki i Szkolnictwa Wyższego
References (43)
Show source-provided references
1. Bucur, V. (2006). Acoustics of Wood, Springer. [2nd ed.].10.1007/3-540-30594-7 ↗
2. International Thermowood Association (2003). ThermoWood®Handbook, Finnish Thermowood Association.
3. Viitaniemi, P., Jämsä, S., Ek, P., and Viitanen, H. (1997). Method for Improving Biodegradation Resistance and Dimensional Stability of Cellulosic Products. (US5678324A), U.S. Patent.10.14214/ma.6367 ↗
4. Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents10.1051/forest:2007048 ↗
5. Relation between chemical changes and mechanical properties of thermally treated wood10.1515/HF.2009.084 ↗
6. Wood modification by heat treatment: A review10.15376/biores.4.1.Esteves ↗
7. Boonstra, M.J. (2008). A Two-Stage Thermal Modification of Wood. [Ph.D. Thesis, Université Henry Poincaré].
8. Physical and mechanical properties and resistance to fungi of scots pine and birch wood modified thermally and using natural oil
9. Biological durability of oil heat treated alder wood10.5552/drind.2014.1256 ↗
10. Biological resistance of heat-treated wood of Pinus caribea and Eucalyptus saligna
11. Dubey, M.K. (2010). Improvements in Stability, Durability and Mechanical Properties of Radiata Pine Wood after Heat-Treatment in a Vegetable Oil. [Ph.D. Thesis, Canterbury University].
12. Bak, M., and Nemeth, R. (2012, January 26–27). Modification of wood by oil heat treatment. Presented at of International Scientific Confenrece on Sustainable Development & Ecological Footprint, Sopron, Hungary.
13. Dimensional stability, fungal resistance and mechanical properties of radiata pine after combined thermo-mechanical compression and oil-treatment10.1515/hf-2015-0174 ↗
14. Impact of Thermal Treatment on Anatomical and mechanical Properties of Ricinodendron heudelotii Wood10.9734/jsrr/2019/v22i530101 ↗
15. Rapp, A.O. (2001). Oil heat treatment of wood in Germany-State of the art. COST Action E22 Review on Heat Treatments of Wood, Proceedings of the Special Seminarheld in Antibes, France on 9 February 2001, Antibes, France, 9 February 2001, The European Commission.
16. Oil-heat treatment of rubberwood for optimum changes in chemical constituents and decay resistance
17. Hill, C. (2006). Wood Modification: Chemical, Thermal and Other Processes, John Wiley & Sons, Ltd.10.1002/0470021748 ↗
18. Heat-treated wood as a substrate for coatings, weathering of heat-treated wood and coating performance on heat-treated wood
19. The colour change of Oil-Heat-Treated timber during weathering
20. Acoustic Properties of Norway spruce wood modified with staining fungus (Sydowia polyspora)10.15376/biores.14.2.3432-3444 ↗
21. Physical and mechanical properties of heat-treated Daniella oliveri (Africa Balsam Tree) wood10.9734/cjast/2019/v35i230175 ↗
22. The effect of heating temperature on static hardness of beech (Fagus sylvatica L.) wood10.14741/ijcet/v.9.3.3 ↗
23. Optimization of spruce (Picea abies L.) wood thermal treatment temperature to improve its acoustic properties10.15376/biores.15.1.505-516 ↗
24. Modal parameters of resonant spruce wood (Picea abies L.) after thermal treatment10.1016/j.jksus.2019.11.007 ↗
25. ISO 13061-2 (2014). Physical and Mechanical Properties of Wood—Test Methods for Small Clear Wood Specimens—Part 2: Determination of Density for Physical and Mechanical Tests, International Organization for Standardization.
26. PN-77/D-04103 (1977). Wood. Determination of Static Bending Strength, Polish Committee for Standardization.
27. Kollmann, F., and Côté, W.A. (1968). Principles of Wood Science and Technology, Springer.10.1007/978-3-642-87928-9 ↗
28. Assessment of resonance wood quality by comparing its physical and histological properties10.1007/s00226-007-0170-5 ↗
29. Indented rings (hazel growth) of Norway spruce reduce anisotropy of mechanical properties10.1007/s00226-012-0480-0 ↗
30. Resonance wood (Picea abies (L.) Karst.)—Evaluation and prediction of violin makers’ quality-grading10.1121/1.2434756 ↗
31. Sailer, M., Rapp, A., and Leithoff, H. (2000, January 14–19). Improved resistance of Scots pine and spruce by application of an oil-heat treatment. Presented at International Research Group Wood Protection, Kona, HI, USA.
32. Effect of high temperature on the change in colour, dimensional stability and mechanical properties of spruce wood10.1515/HF.2003.080 ↗
33. Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood10.1007/s00226-006-0099-0 ↗
34. Bucur, V. (2016). Handbook of Materials for String Musical Instruments, Springer.10.1007/978-3-319-32080-9 ↗
35. Fletcher, N.H., and Rossing, T.D. (2010). The Physics of Musical Instruments, Springer. [2nd ed.].
36. Benade, A.H. (1990). Fundamentals of Musical Acoustics, Dover Publications Inc.. [2nd ed.].
37. On musical instrument wood
38. Brémaud, I. (2006). Diversity of Woods Used or Usable in Musical Instrument Making. [Ph.D. Thesis, University of Montpellier II].
39. Study on Young’s modulus and internal friction of wood in relation to the evaluation of wood for musical instruments10.1143/JJAP.22.611 ↗
40. On some relations between anatomic properties and acoustical qualities of resonance wood
41. Müller, H.A. (1986, January 21–23). How violin makers choose wood and what this procedure means from a physical point of view. Presented at Catgut Acoustical Society International Symposium on Musical Acoustics, Hartford, CT, USA.
42. Drewno rezonansowe
43. Acoustic properties of resonance wood and distribution of inorganic components of the cell wall10.1007/PL00002629 ↗