journal article·2022-11-17Open access

Cost and Quality Optimization Taguchi Design with Grey Relational Analysis of Halloysite Nanotube Hybrid Composite: CNC Machine Manufacturing

Moses Olabhele Esangbedo, Johnson Kehinde Abifarin

Materials· Volume 15· Issue 22

Abstract

Researchers who work on manufacturing hybrid composites have significant concerns about holistically optimizing more than one performance characteristic, as in the case of cost and quality optimization. They usually trade off one for the other. Hence, this study employed statistical tools and grey relational analyses (GRA) design to model and optimize the surface roughness and cutting force of Computer Numerical Control (CNC) machine settings to manufacture halloysite nanotube hybrid composite. In this paper, the GRA was able to address the multiple optimization complications by producing 0.6 mm depth of cut, 1500 rpm spindle speed, and 40 mmpm feed rate as the CNC machine settings for high-quality and low-cost hybrid composite. It was noticed that the mathematical and interaction modeling of surface roughness, cutting force, and grey relational grade (GRG) allowed different CNC machines to manufacture hybrid composites. This can assist researchers and production engineers of CNC machines. Variance analysis and delta statistical characteristics revealed that the depth of a cut is the most significant machine setting, with a contribution of 49.12%. This paper outlines the possible CNC machine settings for high-quality composite manufacturing. In future studies, it is recommended for researchers in the field of CNC machine manufacturing to consider the modeling analysis aspect of the optimization, which comprehensively provides the opportunity for the adjustment of CNC machines for better material performance, which has been lacking in the literature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Clay minerals and soil interactions · Advanced Surface Polishing Techniques · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Management Engineering, Xuzhou University of Technology, No. 2 Lishui Road, Yunlong District, Xuzhou 221018, China

Department of Mechanical Engineering, Ahmadu Bello University, Zaria 810211, Nigeria

References (56)

Show source-provided references
1. Impact Behaviour of Hybrid Composites for Structural Applications: A Review10.1016/j.compositesb.2017.09.008 ↗
2. Carbon Materials and Their Composites for Electromagnetic Interference Shielding Effectiveness in X-band10.1016/j.carbon.2019.06.002 ↗
3. Lightweight Hybrid Materials and Structures for Energy Absorption: A State-of-the-Art Review and Outlook10.1016/j.tws.2021.108760 ↗
4. Multifunctionality in Epoxy Resins10.1080/15583724.2019.1650063 ↗
5. Yurdacan, H., and Murat Sari, M. (2021). Functional Green-Based Nanomaterials towards Sustainable Carbon Capture and Sequestration. Sustainable Materials for Transitional and Alternative Energy, Elsevier.10.1016/B978-0-12-824379-4.00004-5 ↗
6. Aluminosilicates: Interphase Boundary Interactions and Nature Engineering of Nanostructures10.1088/1742-6596/2315/1/012003 ↗
7. Visentin, S., Strangio, C., Barbero, N., Chamacho Leal, M.d.P., and Viscardi, G. (2014, January 26–28). Halloysite Clay Nanotubes as Carriers for Loading Photosensitizers Molecules. Proceedings of the Nanotechitaly 2014, Venice, Italy.
8. Preparation of Halloysite-Based Tubular Media for Enhanced Methylene Blue Adsorption
9. Microstructural, Mechanical, and Thermal Characteristics of Recycled Cellulose Fiber-Halloysite-Epoxy Hybrid Nanocomposites10.1002/pc.22163 ↗
10. Simultaneous Improvement in Strength, Toughness, and Thermal Stability of Epoxy/Halloysite Nanotubes Composites by Interfacial Modification10.1002/app.43249 ↗
11. Significantly Improved Shear, Dynamic-Mechanical, and Mode II Fracture Performance of Seawater Aged Basalt/Epoxy Composites: The Impact of Halloysite Nanotube Reinforcement
12. Effect of Halloysite Nanotubes on Matrix Microcracking in Carbon Fiber/Epoxy Composites10.1007/s11029-022-10030-5 ↗
13. Potential Materials for Food Packaging from Nanoclay/Natural Fibres Filled Hybrid Composites10.1016/j.matdes.2012.10.044 ↗
14. Effect of Aluminium Tetrahydrate Nanofiller Addition on the Mechanical and Thermal Behaviour of Luffa Fibre-Based Polyester Composites under Cryogenic Environment10.1155/2022/5970534 ↗
15. Properties and Applications of Halloysite Nanotubes: Recent Research Advances and Future Prospects10.1016/j.clay.2015.05.001 ↗
16. The Definition and Nomenclature of Halloysites10.1346/CCMN.1975.0230510 ↗
17. Introduction to Grey System Theory
18. Javanmardi, E., Liu, S., and Xie, N. (2020). Exploring Grey Systems Theory-Based Methods and Applications in Sustainability Studies: A Systematic Review Approach. Sustainability, 12.10.3390/su12114437 ↗
19. Esangbedo, M.O., and Bai, S. (2019). Grey Regulatory Focus Theory Weighting Method for the Multi-Criteria Decision-Making Problem in Evaluating University Reputation. Symmetry, 11.10.3390/sym11020230 ↗
20. Employment of Probability-Based Multi-Response Optimization in High Voltage Thermofluids10.5937/vojtehg70-35764 ↗
21. Taguchi Design Optimization of Machining Parameters on the CNC End Milling Process of Halloysite Nanotube with Aluminium Reinforced Epoxy Matrix (HNT/Al/Ep) Hybrid Composite10.1016/j.hbrcj.2013.09.007 ↗
22. The Nexus between Air Pollution, Green Infrastructure and Human Health10.1016/j.envint.2019.105181 ↗
23. Scaling Foreign-Service Premium Allowance Based on SWARA and GRA with Grey Numbers
24. Esangbedo, M.O., Xue, J., Bai, S., and Esangbedo, C.O. (2022). Relaxed Rank Order Centroid Weighting MCDM Method With Improved Grey Relational Analysis for Subcontractor Selection: Photothermal Power Station Construction. IEEE Trans. Eng. Manag., 1–18.
25. Multi-Objective Robust Optimization of Multi-Directional Carbon/Glass Fibre-Reinforced Hybrid Composites with Manufacture Related Uncertainties under Flexural Loading10.1016/j.compstruct.2017.09.019 ↗
26. Multi-Objective Optimization of Parameters in Abrasive Water Jet Machining of Carbon-Glass Fibre-Reinforced Hybrid Composites10.1007/s40033-019-00181-6 ↗
27. Multi-Objective Optimal Design of Hybrid Composite Laminates for Minimum Cost and Maximum Fundamental Frequency and Frequency Gaps10.1016/j.compstruct.2018.10.075 ↗
28. Concurrent Multi-Scale Optimization of Hybrid Composite Plates and Shells for Vibration10.1016/j.compstruct.2019.111635 ↗
29. Multi-Objective Optimal Design of Hybrid Composite Laminates under Eccentric Loading10.1016/j.aej.2020.09.015 ↗
30. Kayaroganam, P., Krishnan, V., Natarajan, E., Natarajan, S., and Muthusamy, K. (2021). Drilling Parameters Analysis on In-Situ Al/B4C/Mica Hybrid Composite and an Integrated Optimization Approach Using Fuzzy Model and Non-Dominated Sorting Genetic Algorithm. Metals, 11.10.3390/met11122060 ↗
31. Multi-Objective Optimization of WEDM of Aluminum Hybrid Composites Using AHP and Genetic Algorithm10.1007/s13369-021-05865-4 ↗
32. Assessment of Erosion Rate on AA7075 Based Surface Hybrid Composites Fabricated through Friction Stir Processing by Taguchi Optimization Approach10.1080/01694243.2021.1929018 ↗
33. Multiple Objective Optimization Design of Hybrid Composite Structures Considering Multiple-Scale Uncertainties10.1016/j.compstruct.2022.115658 ↗
34. González, H., Calleja, A., Pereira, O., Ortega, N., López de Lacalle, L.N., and Barton, M. (2018). Super Abrasive Machining of Integral Rotary Components Using Grinding Flank Tools. Metals, 8.10.3390/met8010024 ↗
35. An Integrated Evolutionary Approach for Modelling and Optimisation of CNC End Milling Process10.1080/0951192X.2012.684718 ↗
36. Optimization of Cutting Parameters to Minimize the Surface Roughness in the End Milling Process Using the Taguchi Method10.3311/PPme.9114 ↗
37. Achuthamenon Sylajakumari, P., Ramakrishnasamy, R., and Palaniappan, G. (2018). Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite. Materials, 11.10.3390/ma11091743 ↗
38. Modeling and Grey Relational Multi-response Optimization of Chemical Additives and Engine Parameters on Performance Efficiency of Diesel Engine10.52812/ijgs.33 ↗
39. A TOPSIS-Based Taguchi Design to Investigate Optimum Mixture Proportions of Graphene Oxide Powder Synthesized by Hummers Method10.1007/s13369-018-3184-4 ↗
40. Taguchi Design of PZT-Based Piezoelectric Cantilever Beam with Maximum and Robust Voltage for Wide Frequency Range10.1007/s11664-019-06994-1 ↗
41. Forging Optimisation Process Using Numerical Simulation and Taguchi Method10.1007/s42452-020-2547-0 ↗
42. Chauhan, V., Kärki, T., and Varis, J. (2021). Optimization of Compression Molding Process Parameters for NFPC Manufacturing Using Taguchi Design of Experiment and Moldflow Analysis. Processes, 9.10.3390/pr9101853 ↗
43. Taguchi Design-Based Synthesis and Structural Analysis of Cassia Galactomannan Hydroxypropyl Derivative10.1016/j.carbpol.2022.119672 ↗
44. Multi-Response Optimization of Wire Electrical Discharge Machining Process Parameters for Al7075/Al 2 O 3 /SiC Hybrid Composite Using Taguchi-based Grey Relational Analysis10.1177/0954405414526382 ↗
45. Optimization and Significance of Fabrication Parameters on the Mechanical Properties of 3D Printed Chitosan/PLA Scaffold10.1016/j.matpr.2021.09.386 ↗
46. Ross, P.J. (1988). Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design, McGraw-Hill.
47. Dehnad, K. (1989). Quality Engineering through Design Optimization. Quality Control, Robust Design, and the Taguchi Method, Springer US.10.1007/978-1-4684-1472-1 ↗
48. Pervez, M., Shafiq, F., Sarwar, Z., Jilani, M., and Cai, Y. (2018). Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis. Materials, 11.10.3390/ma11030426 ↗
49. Use of the Taguchi Method and Grey Relational Analysis to Optimize Turning Operations with Multiple Performance Characteristics10.1081/AMP-120029852 ↗
50. Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys10.1080/10426914.2013.763952 ↗
51. The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron10.1007/s12666-014-0439-y ↗
52. Davim, J.P. (2017). Development and Characterization of Novel Fiber Reinforced Hybrid Friction Composites. Green Composites, De Gruyter.10.1515/9783110435788 ↗
53. Taguchi Grey Relational Analysis on the Mechanical Properties of Natural Hydroxyapatite: Effect of Sintering Parameters10.1007/s00170-021-07288-9 ↗
54. Muhammad, A., Kumar Gupta, M., Mikołajczyk, T., Pimenov, D.Y., and Giasin, K. (2021). Effect of Tool Coating and Cutting Parameters on Surface Roughness and Burr Formation during Micromilling of Inconel 718. Metals, 11.10.3390/met11010167 ↗
55. Investigations on Tool Wear, Surface Roughness, Cutting Temperature, and Chip Formation in Machining of Cu-B-CrC Composites10.1007/s00170-021-07670-7 ↗
56. Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel10.1590/1980-5373-mr-2021-0351 ↗