journal article·2024-01-30Open access

A Review of Research Progress on Ti(C,N)-Based Cermet Binder by Intermetallic Compounds and High-Entropy Alloys

Liang Wang, Jingfei Bai, Yanghe Wang, Zhengxing Men

Materials· Volume 17· Issue 3

Abstract

Ti(C,N)-based cermet is a kind of composite material composed of a metal binder phase and a Ti(C,N)-hard phase, which is widely used in the fields of cutting machining and wear-resistant parts due to its high hardness, good toughness, wear resistance, and chemical stability. In recent years, the research on the replacement of traditional Ni, Co, and Fe binder phases by novel binder phases such as intermetallic compounds and high-entropy alloys has made remarkable progress, which significantly improves the mechanical properties, wear resistance, corrosion resistance, and high-temperature oxidation resistance of Ti(C,N)-based cermets. This paper reviews the latest research results, summarizes the mechanism of the new binder to improve the performance of metal–ceramics, and looks forward to the future research directions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chengdu Aeronautic Polytechnic, Chengdu 610100, China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Sichuan Province · State Key Laboratory of Long-life High-Temperature Materials · Chengdu Aeronautic Polytechnic Natural Science Project

References (100+)

Show source-provided references
1. Ti(C,N) cermets—Metallurgy and properties10.1016/0263-4368(95)00027-G ↗
2. Plucknett, K. (2018). Cermets and Hardmetals. Metals, 8.10.3390/met8110963 ↗
3. Effect of submicron Ti(C,N) on the microstructure and the mechanical properties of Ti(C,N)-based cermets10.1016/j.ijrmhm.2011.05.007 ↗
4. Synthesis and mechanical properties of TiCx and Ti(C,N) reinforced Titanium matrix in situ composites by reactive spark plasma sintering10.1016/j.msea.2019.05.021 ↗
5. Influence of Fe–Ni–Co binder composition on nitridation of cemented carbides10.1016/j.ijrmhm.2011.07.012 ↗
6. Investigations on kinetics of formation of fcc-free surface layers on cemented carbides with Fe–Ni–Co binders10.1016/j.ijrmhm.2010.12.007 ↗
7. Effect of pre-alloyed raw materials on the microstructure of a (Ti,W)(C,N)–Co cermet10.1016/S0263-4368(00)00029-9 ↗
8. Effect of Ta on structure and mechanical properties of (Ti,Ta,W)(C,N)–Co cermets10.1016/S0263-4368(01)00042-7 ↗
9. A review on the microstructure and properties of TiC and Ti(C,N) based cermets10.1016/j.ijrmhm.2023.106320 ↗
10. Wear performance of TiC/Fe cermet electrical discharge coatings10.1016/j.wear.2018.02.007 ↗
11. Qiu, H., Li, X., Pan, C., and Fan, J. (2023). Effect of Mo2C Addition on the Tribological Behavior of Ti(C,N)-Based Cermets. Materials, 16.10.3390/ma16165645 ↗
12. TiMoCN based cermets: Part I. Morphology and phase composition10.1016/S0263-4368(03)00010-6 ↗
13. Microstructure and mechanical properties of TiC-TiN based cermets for tools application10.1016/j.ijrmhm.2008.10.006 ↗
14. Carbide/binder interfaces in Ti(CN)–(Ti,W)C/(Ti,W)(CN)-based cermets10.1016/j.jallcom.2015.10.121 ↗
15. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets10.1016/j.ijrmhm.2005.05.008 ↗
16. Effect of group IV elements on the cutting characteristics of Ti(C,N) cermet tools and reliability analysis10.1016/j.jmatprotec.2004.06.009 ↗
17. Heydari, L., Lietor, P.F., Corpas-Iglesias, F.A., and Laguna, O.H. (2021). Ti(C,N) and WC-Based Cermets: A Review of Synthesis, Properties and Applications in Additive Manufacturing. Materials, 14.10.3390/ma14226786 ↗
18. Development and application of tool wear: A review of the characterization of TiC-based cermets with different binders10.1016/j.cej.2014.06.078 ↗
19. Effect of VC addition on the microstructure and properties of TiC steel-bonded carbides fabricated by two-step sintering10.1016/j.ijrmhm.2022.105948 ↗
20. The influence of intermetallic ordering on wear and indentation properties of TiC-Ni3Al cermets10.1016/j.wear.2018.12.034 ↗
21. Kübarsepp, J., Juhani, K., and Tarraste, M. (2021). Abrasion and Erosion Resistance of Cermets: A Review. Materials, 15.10.3390/ma15010069 ↗
22. Ti(C,N)-Based Cermets: Critical Review of Achievements and Recent Developments10.4028/www.scientific.net/SSP.274.53 ↗
23. Effect of C content on the surface gradient structure of (Ti, Mo)(C, N) and Ti(C, N)-based cermets10.1016/j.jmrt.2021.12.021 ↗
24. Effect of AlxCoCrFeNiCu binder on mechanical properties and wear performance of Ti(C,N) cermet10.1142/S0217979222400380 ↗
25. Understanding of wetting and solubility behavior of Fe binder on Ti(C,N) cermets10.1016/j.jallcom.2018.07.243 ↗
26. Reaction mechanisms between slag and Ti(C,N)-MgAl2O3-Al2O3 refractories at 1600 °C10.1016/j.ceramint.2020.07.276 ↗
27. Chicardi, E., and Gotor Martínez, F.J. (2019). Effects of Boron Addition on the Microstructure and Mechanical Properties of (Ti,Ta)(C,N)-Co Based Cermets. Metals, 9.10.3390/met9070787 ↗
28. Characterization of interfaces between TiCN and iron-base binders10.1016/j.ijrmhm.2016.08.010 ↗
29. Effect of pressure on sintering of TiC-Fe-Cr-Mo cermets under vacuum conditions10.1016/j.ijrmhm.2023.106262 ↗
30. The effect of production method on properties of Fe–TiC composite10.1016/j.minpro.2010.01.002 ↗
31. Friction and tribological behavior of (Ti, V)C–Co cermets10.1016/S0924-0136(03)00340-6 ↗
32. Spark plasma sintering of TiC particle-reinforced molybdenum composites10.1016/j.ijrmhm.2011.12.001 ↗
33. Development of multicomponent–multiphase materials based on (Ti,Ta,Nb)CxN1−x carbonitride solid solutions10.1016/j.cej.2012.03.046 ↗
34. Load-Dependent Transition in Sliding Wear Properties of TiCN–WC–Ni Cermets10.1111/j.1551-2916.2007.01630.x ↗
35. Microstructure of Ti(C,N)-based cermets—Influence of sintering temperature10.1016/j.ijrmhm.2022.105897 ↗
36. High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets10.1016/j.corsci.2015.10.001 ↗
37. Fracture behaviors of Ti(C, N)-based cermets with different contents of metal binder10.1016/j.ceramint.2022.07.183 ↗
38. On gradient formation in alternative binder cemented carbides10.1016/j.ijrmhm.2018.01.024 ↗
39. Effect of carbon content and cooling rate on the microstructure and hardness of TiC-Fe-Cr-Mo cermets10.1016/j.ijrmhm.2023.106552 ↗
40. Enhanced toughness of titanium carbonitride-based cermets by addition of (Ti,W)C carbides10.1016/j.msea.2015.10.025 ↗
41. Microstructure and mechanical properties of (Ti,W)C–Ni cermet prepared using a nano-sized TiC–WC powder mixture10.1016/j.jallcom.2015.03.115 ↗
42. Cermet Systems: Synthesis, Properties, and Applications10.3390/ceramics5020018 ↗
43. Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes10.1016/j.jallcom.2017.10.274 ↗
44. Cemented carbide microstructures: A review10.1016/j.ijrmhm.2018.12.004 ↗
45. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet—A review10.1016/j.matdes.2014.10.081 ↗
46. Behaviour of TiC-base cermets in different wear conditions10.1016/S0043-1648(01)00569-5 ↗
47. Design of alternative binders for hard materials10.1016/j.ijrmhm.2019.105089 ↗
48. Ti(C,N)-Fe15Ni10Cr cermets as alternative hard materials: Influence of the processing route and composition on their microstructure and properties10.1016/j.ceramint.2021.05.045 ↗
49. Investigation on tensile properties and failure mechanism of Ni3Al(001)/Ni3Ta(001) interface using the first-principles method10.1016/j.vacuum.2023.112212 ↗
50. Study on high temperature deformation behavior of WC-10 wt cemented carbide10.1016/j.jallcom.2019.153156 ↗
51. Mechanical properties of (W,Ti)C and (W,Ti)C–NiAl3 cermet consolidated by the high-frequency induction-heating method10.1016/j.jallcom.2013.02.187 ↗
52. Straumal, B.B., and Konyashin, I. (2023). Faceting/Roughening of WC/Binder Interfaces in Cemented Carbides: A Review. Materials, 16.10.3390/ma16103696 ↗
53. Effect of nanocrystalline binder on the microstructure and mechanical properties of ultrafine Ti(CN) cermets10.1016/S0921-5093(03)00506-9 ↗
54. Rapid consolidation of nanostructured WC-FeAl hard composites by high-frequency induction heating and its mechanical properties10.1016/j.ijrmhm.2016.09.013 ↗
55. Relationship between hardness and fracture toughness in WC–FeAl composites fabricated by pulse current sintering technique10.1016/j.ijrmhm.2013.10.008 ↗
56. The tribological and mechanical properties of niobium carbides (NbC) bonded with cobalt or Fe3Al10.1016/j.wear.2014.09.007 ↗
57. Microstructure and mechanical properties of NbC-matrix hardmetals with secondary carbide addition and different metal binders10.1016/j.ijrmhm.2014.10.014 ↗
58. Influence of applied pressure during field-assisted sintering of Ti(C,N)–WC–FeAl based nanocomposite10.1016/j.ceramint.2014.09.022 ↗
59. Comparison of the wear behavior of WC/(FeAl-B) and WC-Co composites at high temperatures10.1016/j.ijrmhm.2017.05.003 ↗
60. Microstructural characterization and mechanical properties of a novel TiC-based cermet bonded with Ni3(Al,Ti) and NiAl duplexalloy10.1016/j.matchar.2017.11.003 ↗
61. Microstructure and oxidation behavior of Ti(C,N)-based cermets with in situ synthesized Ni3Al phase10.1016/j.ijrmhm.2018.02.008 ↗
62. Reciprocating wear response of Ti(C, N)-Ni3Al cermets10.1179/1879139512Y.0000000022 ↗
63. The sliding wear of TiC and Ti(C,N) cermets prepared with a stoichiometric Ni3Al binder10.1016/j.wear.2014.06.025 ↗
64. The effects of Mo2C additions on the sintering response of TiC0.3N0.7–Ni3Al cermets10.1016/j.ijrmhm.2016.08.013 ↗
65. The possibility of utilization of Ni3Al as the binding material for hard alloys10.3103/S1067821209030237 ↗
66. Liquid-phase sintering of Ti(C,N)-based cermets. The effects of binder nature and content on the solubility and wettability of hard ceramic phases10.1016/j.jallcom.2013.01.046 ↗
67. The effects of Mo2C additions on the microstructure and sliding wear of TiC0.3N0.7–Ni3Al cermets10.1016/j.ijrmhm.2015.01.013 ↗
68. Effect of WC content on microstructure and mechanical properties of Ni3Al-bonded cermets10.1016/j.ceramint.2015.12.058 ↗
69. Microstructure, mechanical properties and fracture behavior of WC-40vol10.1016/j.ijrmhm.2013.03.014 ↗
70. Microstructure, mechanical and tribological properties of multilayer graphene reinforced WC-10Ni3Al prepared by microwave sintering10.1016/j.jmrt.2023.09.116 ↗
71. Spherical indentation damage in TiC–Ni3Al composites10.1016/j.ijrmhm.2011.08.008 ↗
72. Abrasion wear behavior of WC–10Ni3Al cermet with plate-like triangular prismatic WC grains10.1016/j.ceramint.2014.12.089 ↗
73. Preparation and mechanical properties of WC-10 Ni3Al cemented carbides with plate-like triangular prismatic WC grains10.1016/j.jallcom.2012.07.131 ↗
74. Preparation, microstructure and mechanical properties of multicomponent Ni3Al-bonded cermets10.1016/j.ceramint.2014.05.135 ↗
75. Effect of sintering techniques on the structure and dry sliding wear behavior of WC-FeAl composite10.1016/j.ceramint.2020.04.154 ↗
76. The aqueous corrosion and wear responses of HVOF-deposited TiC-Ni3Al, WC-Co, and WC-CoCr coatings on AISI 4130 steel substrates10.1016/j.surfcoat.2023.130018 ↗
77. Wear Resistance of WC-Co Bimodal Coatings Manufactured By HVOF With Different Types of Flames as an Alternative to Hexavalent Chromium for Landing Gears10.1149/10601.0151ecst ↗
78. Study of oxidation mechanisms of Ni-Al alloys with different phase structures at 1200 °C10.1016/j.mtcomm.2023.106393 ↗
79. Improvement mechanism of the oxidation resistance of Al-doped Ti(C,N)-based cermets: Influence of enriched Al in the subsurface oxide layer10.1016/j.corsci.2022.110722 ↗
80. High temperature oxidation behaviors of Ni3Al-bonded cermets10.1016/j.jallcom.2017.02.034 ↗
81. The influence of Ni3Al binder content on the aqueous corrosion response of TiC and Ti(C,N) cermets10.1016/j.ijrmhm.2017.01.009 ↗
82. The effects of C:N ratio on the aqueous corrosion response of TiC and Ti(C,N) cermets with a Ni3Al-based binder10.1016/j.ijrmhm.2016.09.010 ↗
83. Corrosion behavior of Ni3Al-bonded TiC-based cermets in H2SO4 and NaOH solutions10.1016/j.ceramint.2018.04.161 ↗
84. Zamanzade, M., Barnoush, A., and Motz, C. (2016). A Review on the Properties of Iron Aluminide Intermetallics. Crystals, 6.10.3390/cryst6010010 ↗
86. Aliofkhazraei, M.E. (2018). Intermetallic Compounds-Formation and Applications, IntechOpen.10.5772/intechopen.68256 ↗
87. Mahmood, A. (2018). Intermetallic Compounds, IntechOpen.
88. Iron aluminides: Present status and future prospects10.1016/S0921-5093(98)00909-5 ↗
89. Assessment of mechanical properties at microstructural length scale of Ti(C, N)-FeNi ceramic-metal composites by means of massive nanoindentation and statistical analysis10.1016/j.ceramint.2019.06.292 ↗
90. Micropillar compression of Ti(C,N)-FeNi cermets: Microstructural, processing, and scale effects10.1016/j.jeurceramsoc.2022.09.029 ↗
91. In-situ fabrication of TiC-Fe3Al cermet10.1016/j.ceramint.2017.01.078 ↗
92. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
93. In-situ production and microstructures of iron aluminide/TiC composites10.1016/S0966-9795(99)00002-3 ↗
94. The influence of different additives on the kinetics of self-propagating high-temperature synthesis during the sintering process of Fe and Al elemental powders10.1016/j.intermet.2010.02.018 ↗
95. Fabrication of nanocrystalline TiC coating on AISI D2 steel substrate via high-energy mechanical alloying of Ti and C10.1016/j.powtec.2015.10.030 ↗
96. Lightweight TiC–(Fe–Al) ceramic–metal composites made in situ by pressureless melt infiltration10.1007/s10853-019-03792-2 ↗
97. Preparation and mechanical properties of Fe3Al(Ti)/TiC composites10.1016/j.jmatprotec.2007.12.137 ↗
98. Effect of Cr and Ti additions on the corrosion behavior of Fe3Al alloys in chloride-containing sulfuric acid solutions10.1016/j.matlet.2005.04.060 ↗
99. Characterization of Fe3Al-based intermetallic alloys fabricated by mechanical alloying and HIP consolidation10.1016/S0921-5093(00)01025-X ↗
100. Carbon addition effects on microstructure and small-scale hardness for Ti(C,N)-FeNi cermets10.1016/j.ijrmhm.2019.105064 ↗