journal article·2024-07-11Open access

Recent Advances in Fabrication and Applications of Yttrium Aluminum Garnet-Based Optical Fiber: A Review

Yuli Pang, Xu Lu, Xin Zhang, Ziheng Miao, Min Sun, Guowu Tang, Jialong Li, Qilai Zhao, Changsheng Yang, Dongdan Chen, Qi Qian, Zhuo Xu

Materials· Volume 17· Issue 14

Abstract

Yttrium aluminum garnet (YAG)-based optical fiber is one of the research hotspots in the field of fiber lasers due to its combined advantages of a wide doping range of rare earth ions and the high mechanical strength of YAG material, as well as the flexibility and small size of the fiber structure. YAG-based optical fibers and related laser devices can be used in communication, sensing, medicine, etc. A comprehensive review of YAG-based optical fibers is provided in this paper. Firstly, the fabrication processes of YAG-based optical fibers are summarized and the structure and properties of fibers are classified and compared. Secondly, according to the optical wavelength regions, rare earth-doped YAG-based optical fibers for the applications of single-frequency and mode-locked fiber lasers are summarized. Lastly, the development challenges in both the fabrication and applications of YAG-based optical fibers are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Photonic Crystal and Fiber Optics · Advanced Fiber Laser Technologies · Advanced Fiber Optic Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Functional Materials, School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, China

Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education, International Center for Dielectric Research, School of Electronic and Information Engineering, Xi’an Jiaotong University, Xi’an 710049, China

School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006, China

State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Fiber Laser Materials and Applied Techniques, Guangdong Engineering Technology Research and Development Center of Special Optical Fiber Materials and Devices, Institute of Optical Communication Materials, South China University of Technology, Guangzhou 510640, China

Funding

Fundamental Research Funds for the Central Universities

References (100+)

Show source-provided references
1. Characterization of Yb3+ clusters in silica glass preforms10.1016/j.optmat.2008.04.012 ↗
2. Glass: The Carrier of Light—A Brief History of Optical Fiber10.1111/ijag.12239 ↗
3. Rethinking Optical Fiber: New Demands, Old Glasses10.1111/jace.12516 ↗
4. Optical Fiber Sensors in Extreme Temperature and Radiation Environments: A Review10.1109/JSEN.2022.3181949 ↗
5. Thermophoretic Deposition of Small Particles in the Modified Chemical Vapor Deposition (MCVD) Process10.1111/j.1151-2916.1980.tb10763.x ↗
6. Analysis of viscosity data in As2Se3, Se and Se95Te5 chalcogenide melts using the pressure assisted melt filling technique10.1016/j.jnoncrysol.2019.01.037 ↗
7. Pressure-assisted melt-filling and optical characterization of Au nano-wires in microstructured fibers10.1364/OE.19.012180 ↗
8. High-Pressure Chemical Deposition for Void-Free Filling of Extreme Aspect Ratio Templates10.1002/adma.201001199 ↗
9. The characteristics of high-quality Yb:YAG single crystal fibers grown by a LHPG method and the effects of their discoloration10.1039/C9RA03633D ↗
10. Single–crystal fiber optical devices: A Nd:YAG fiber laser10.1063/1.88172 ↗
11. Glass-clad Cr4+:YAG crystal fiber for the generation of superwideband amplified spontaneous emission10.1364/OL.29.000439 ↗
12. Double-clad Cr4+:YAG crystal fiber amplifier10.1364/OL.30.000129 ↗
13. Cr4+:YAG double-clad crystal fiber laser10.1364/OL.33.002919 ↗
14. Lai, C.C., Lin, Y.S., and Huang, K.Y. (June, January 31). Effect of Nano-crystalline Structures in the Interface on Double-clad Cr4+: YAG Crystal Fiber. Proceedings of the Conference on Lasers and Electro-Optics/International Quantum Electronics Conference, Baltimore, MD, USA.
15. Lin, Y.S., Jheng, D.Y., Hsu, K.Y., Tsia, C.N., and Hung, S.L. (2011, January 1–6). Ce3+,Sm3+:YAG Double-clad Crystal Fiber Broadband Light Source. Proceedings of the CLEO: 2011—Laser Applications to Photonic Applications, Baltimore, MD, USA.10.1364/CLEO_SI.2011.CTuI7 ↗
16. Cladding YAG crystal fibers with high-index glasses for reducing the number of guided modes10.1364/OME.3.000813 ↗
17. Hsu, K.Y., Yang, M.H., Jheng, D.Y., and Huang, S.L. (July, January 30). Single Crystalline YAG-core Fiber with a Lanthanum Dense Flint Glass Cladding. Proceedings of the 2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEOPR), Kyoto, Japan.
18. Nie, C.D., Li, Y., Cloos, E., Johnson, E.G., Rand, S.C., and Harrington, J.A. (2013). Single-Crystal, Rare-Earth Doped-YAG Fibers Grown by the Laser Heated Pedestal Growth Technique. Frontiers in Optics, Optica Publishing Group.10.1364/FIO.2013.FTu4B.4 ↗
19. Growth of single-crystal YAG fiber optics10.1364/OE.24.015522 ↗
20. Maxwell, G., Ponting, B., Gebremichael, E., and Magana, R. (2017). Advances in Single-Crystal Fibers and Thin Rods Grown by Laser Heated Pedestal Growth. Crystals, 7.10.3390/cryst7010012 ↗
21. Low-loss ‘crystalline-core/crystalline-clad’ (C4) fibers for highly power scalable high efficiency fiber lasers10.1364/OE.26.005092 ↗
22. Kim, W., Guo, R., Yin, S., Shaw, B., Bayya, S., Askins, C., and Peele, J. (2016, January 7). Cladded single crystal fibers for high power fiber lasers. Proceedings of the Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications X, San Diego, CA, USA.10.1117/12.2239218 ↗
23. Structure formation in yttrium aluminum garnet (YAG) fibers10.1016/j.jeurceramsoc.2013.10.036 ↗
24. Preparation of Yttrium Aluminum Garnet Fibers by the Sol-Gel Method
25. Shaw, L.B., Bayya, S., and Kim, W. (2018, January 13–18). Cladded Single Crystal Fibers for All-Crystalline Fiber Lasers. Proceedings of the Conference on Lasers and Electro-Optics, San Jose, CA, USA.10.1364/CLEO_SI.2018.SF3I.3 ↗
26. Challenge and study for developing of novel single crystalline optical materials using micro-pulling-down method10.1016/j.optmat.2006.10.030 ↗
27. Growth of Y3Al5O12:Nd fiber crystals by micro-pulling-down technique10.1016/S0022-0248(99)00170-0 ↗
28. Comparative study of optical and scintillation properties of Tm3+:YAG, and Tm3+:LuAG single crystals10.1016/j.optmat.2012.10.010 ↗
29. Improvement of scintillation properties on Ce doped Y3Al5O12 scintillator by divalent cations co-doping10.7567/JJAP.54.04DH17 ↗
30. High-power laser with Nd:YAG single-crystal fiber grown by the micro-pulling-down technique10.1364/OL.31.003468 ↗
31. Long (111)-oriented Y3Al5O12:Nd3+ single crystal fibers grown by modified micro-pulling down technology for optical characterization and laser generation10.1016/j.optmat.2006.11.025 ↗
32. 34 W continuous wave Nd:YAG single crystal fiber laser emitting at 946 nm10.1007/s00340-011-4638-5 ↗
33. Development of fiber optic growth equipment for micro-pulling-down crystals and growth of YAG single crystals
34. Growth and spectral properties of Sm:YAG/Sm:Y3ScAl4O12 single crystal fiber
35. Wu, B.Y. (2023). Growth of High-Quality YAG and YSGG Laser Single-Crystal Fibers by Micro-Pulling-Down Method and Its Application Technology Research. [Ph.D. Thesis, Shan Dong University]. (In Chinese).
36. Research in Crystal Materials: From Bulk Crystals to Micro-nano Crystals
37. Glass-ceramic optical fiber containing Ba2TiSi2O8 nanocrystals for frequency conversion of lasers10.1038/srep44456 ↗
38. Perspective: Molten core optical fiber fabrication—A route to new materials and applications10.1063/1.5067337 ↗
39. Tang, G.W. (2017). Research on Composite Glass Fiber. [Ph.D. Thesis, South China University of Technology]. (In Chinese).
40. On the fabrication of all-glass optical fibers from crystals10.1063/1.3080135 ↗
41. Feasibility study of Yb:YAG-derived silicate fibers with large Yb content as gain media10.1016/j.optmat.2012.02.019 ↗
42. Characterisation of Raman gain spectra in Yb:YAG-derived optical fibres10.1049/el.2013.1386 ↗
43. Silicon-core glass fibres as microwire radial-junction solar cells10.1038/srep06283 ↗
44. A silica optical fiber doped with yttrium aluminosilicate nanoparticles for supercontinuum generation10.1016/j.optmat.2016.01.018 ↗
45. Tm:YAG ceramic derived multimaterial fiber with high gain per unit length for 2 microm laser applications10.1364/OL.386005 ↗
46. Progress on single-frequency fiber laser based on Re:YAG-SiO2 fiber (invited)
47. Sub-kHz-linewidth continuous-wave single-frequency ring-cavity fiber laser based on high-gain Er: YAG crystal-derived silica fiber10.1364/OE.482866 ↗
48. Brillouin spectroscopy of YAG-derived optical fibers10.1364/OE.18.010055 ↗
49. Dragic, P.D., Liu, Y.S., Ballato, J., Hawkins, T., and Foy, P. (2012, January 15). YAG-derived fiber for high-power narrow-linewidth fiber lasers. Proceedings of the Fiber Lasers IX: Technology, Systems, and Applications, San Francisco, CA, USA.10.1117/12.907478 ↗
50. Sapphire-derived all-glass optical fibres10.1038/nphoton.2012.182 ↗
51. Highly nonlinear yttrium-aluminosilicate optical fiber with a high intrinsic stimulated Brillouin scattering threshold10.1364/OL.42.004849 ↗
52. Tapered polysilicon core fibers for nonlinear photonics10.1364/OL.41.001360 ↗
53. Alkaline oxide interface modifiers for silicon fiber production10.1364/OME.3.000651 ↗
54. Concentration quenching and clustering effects in Er:YAG-derived all-glass optical fiber10.1364/OME.437825 ↗
55. Preparation of Transparent Y2O3–Al2O3–SiO2 Glasses by High-Gravity Combustion Synthesis with Heating Assistance10.1111/j.1551-2916.2012.05199.x ↗
56. Preparation and characterizations of Nd:YAG ceramic derived silica fibers drawn by post-feeding molten core approach10.1364/OE.24.024248 ↗
57. Preparation and characterizations of Yb:YAG-derived silica fibers drawn by on-line feeding molten core approach10.1016/j.ceramint.2017.01.122 ↗
58. Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser10.1109/JLT.2021.3076889 ↗
59. Over 60% Optical-to-Optical Conversion Efficiency Linearly Polarized Single-Frequency Fiber Laser Based on Yb: YAG Crystal-Derived Silica Fiber10.1109/JLT.2023.3260167 ↗
60. Broadband 2 μm amplified spontaneous emission of Ho/Cr/Tm:YAG crystal derived all-glass fibers for mode-locked fiber laser applications10.1364/OL.44.003290 ↗
61. Xie, Y.Y. (2021). Research on Single-Frequency Laser Technology Based on YAG Crystal-Derived Fiber. [Ph.D. Thesis, Shan Dong University]. (In Chinese).
62. Liu, J.D. (2022). Re:YAG-SiO2 Fiber-Based 1.5 μm High Re-Frequency Mode-Locked Laser. [Master’s Thesis, Shan Dong University]. (In Chinese).
63. Single-frequency fiber laser of 315 mW at 1940 nm based on a Tm: YAG/Ho: YAG-co-derived silica fiber10.1364/OL.502110 ↗
64. Er:YAG/Yb:YAG nanopowders-derived Er/Yb co-doped yttrium aluminosilicate (YAS) fibers fabricated by UV-curable nanocomposites for 1.5-µm single-frequency fiber lasers10.1111/jace.18687 ↗
65. Research Progress of Single-Frequency Fiber Laser10.3788/AOS202141.0114002 ↗
66. Electrically controllable laser frequency combs in graphene-fibre microresonators10.1038/s41377-020-00419-z ↗
67. High power, single-frequency, monolithic fiber amplifier for the next generation of gravitational wave detectors10.1364/OE.27.028523 ↗
68. Duan, L.C., Zhang, H.W., Shi, W., Yang, X.C., Lu, Y., and Yao, J.Q. (2018). High-Resolution Temperature Sensor Based on Single-Frequency Ring Fiber Laser via Optical Heterodyne Spectroscopy Technology. Sensors, 18.10.3390/s18103245 ↗
69. High-Repetition-Rate Ultrafast Fiber Lasers for Material Processing10.1109/JSTQE.2017.2771745 ↗
70. Ablation-cooled material removal with ultrafast bursts of pulses10.1038/nature18619 ↗
71. All-fiber passively mode-locked laser based on a chiral fiber grating10.1364/OL.41.000360 ↗
72. Erbium upconversion luminescence from sol-gel derived multilayer porous inorganic perovskite film10.1142/S2010135X21500314 ↗
73. Sub-kHz-Linewidth Wavelength-Tunable Single-Frequency Ring-Cavity Fiber Laser for C- and L-Band Operation10.1109/JLT.2021.3074824 ↗
74. Yb:YAG single crystal fiber power amplifier for femtosecond sources10.1364/OL.38.000109 ↗
75. Energy scaling of femtosecond amplifiers using actively controlled divided-pulse amplification10.1364/OL.39.001049 ↗
76. Saby, J., Sangla, D., Deslandes, P., and Salin, F. (2014). Non CPA high energy picosecond laser based on single-crystal fiber amplifier. Advanced Solid State Lasers, Optica Publishing Group.10.1364/ASSL.2014.ATh2A.28 ↗
77. Multi-component yttrium aluminosilicate (YAS) fiber prepared by melt-in-tube method for stable single-frequency laser10.1111/jace.16072 ↗
78. 110 mW single-frequency Yb:YAG crystal-derived silica fiber laser at 1064 nm10.1364/OL.44.004307 ↗
79. All-fiber-integrated Yb:YAG-derived silica fiber laser generating 6 W output power10.1364/OE.27.003791 ↗
80. Single-Frequency kHz-Linewidth 1070 nm Laser Based on Yb:YAG Derived Silica Fiber10.1109/LPT.2020.3003668 ↗
81. A 976 nm single-frequency laser based on a Yb:YAG crystal-derived fiber
82. Exceeding 50% slope efficiency DBR fiber laser based on a Yb-doped crystal-derived silica fiber with high gain per unit length10.1364/OE.399692 ↗
83. Over 255 mW single-frequency fiber laser with high slope efficiency and power stability based on an ultrashort Yb-doped crystal-derived silica fiber10.1364/PRJ.419178 ↗
84. Over 100 mW Stable Low-Noise Single-Frequency Ring-Cavity Fiber Laser Based on a Saturable Absorber of Bi/Er/Yb Co-Doped Silica Fiber10.1109/JLT.2021.3124227 ↗
85. Q-switched neodymium-doped Y3Al5O12 based silica fiber laser10.1364/OL.37.002181 ↗
86. Yoo, S., Webb, A.S., Standish, R.J., and May-Smith, T.C. (2012, January 6–11). 5.4 W cladding-pumped Nd:YAG silica fiber laser. Proceedings of the Conference on Lasers and Electro-Optics 2012, San Jose, CA, USA.10.1364/CLEO_SI.2012.CM2N.2 ↗
87. Zhang, Y.M., and Qiu, J.R. (2018, January 26–29). Yttrium aluminosilicate (YAS) fiber with heavily doped of Nd for single frequency laser. Proceedings of the Asia Communications and Photonics Conference (ACP) 2018, Hangzhou, China.10.1109/ACP.2018.8595750 ↗
88. 915 nm all-fiber laser based on novel Nd-doped high alumina and yttria glass @ silica glass hybrid fiber for the pure blue fiber laser10.1364/OL.44.002153 ↗
89. Shao, X.B. (2021). Preparation, Characterization and Single Frequency Laser Technology of Nd: YAG Crystal Derived Fiber. [Master’s Thesis, Shan Dong University]. (In Chinese).
90. Broadband emission from Cr-doped fibers fabricated by drawing tower10.1364/OE.14.008492 ↗
91. Wan, Y., Jiang, C., Zheng, Y.X., Chen, Y.T., Yusufu, T., and Wen, J.X. (2023, January 4–7). All-Fiber Mode-Locked Femtosecond Laser Based on Er: YAG Crystal-Derived Silica Fiber. Proceedings of the 2023 Asia Communications and Photonics Conference/2023 International Photonics and Optoelectronics Meetings(ACP/POEM), Wuhan, China.10.1109/ACP/POEM59049.2023.10368658 ↗
92. The preparation of Yttrium Aluminosilicate (YAS) Glass Fiber with heavy doping of Tm from Polycrystalline YAG ceramics10.1111/jace.15722 ↗
93. Single-frequency distributed Bragg reflector Tm:YAG ceramic derived all-glass fiber laser at 1.95 μm10.1088/1674-1056/ac904c ↗
94. Fabrication of yttrium aluminosilicate fibers with high Yb3+ doping from Yb:YAG ceramic nanopowders and its application in single-frequency fiber lasers10.1364/OME.449777 ↗
95. Y3Al5O12–SiO2 Glasses: Structure and Polyamorphism10.1111/jace.12999 ↗
96. Glass Formation and Structure-Property-Composition Relations of the RE2O3-Al2O3-SiO2 (RE=La, Y, Lu, Sc) Systems10.1111/j.1551-2916.2011.04548.x ↗
97. Investigation on the formation and regulation of yttrium aluminosilicate fiber driven by spontaneous element migration10.1016/j.ceramint.2019.06.165 ↗
98. Thermodynamic study on elimination of platinum inclusions in phosphate laser glasses for inertial confinement fusion applications10.1007/BF03182732 ↗
99. A Yttrium Aluminosilicate (YAS) Glass Fiber with Graded Refractive Index Fabricated by Melt-in-Tube Method10.1111/jace.15320 ↗
100. Elastic softening of amorphous and crystalline Li–Si Phases with increasing Li concentration: A first-principles study10.1016/j.jpowsour.2010.04.044 ↗