Study on Mechanical Behavior and Energy Mechanism of Sandstone under Chemical Corrosion
Source abstract
Abstract
Chemical corrosion has a significant impact on the properties of rock materials. To study the mechanical behavior and energy mechanism of rock under chemical corrosion, this paper took the sandstone of Haitangshan tunnel in Fuxin as the research object, used a Na2SO4 solution to simulate different chemical environments, carried out a triaxial loading test on sandstone through the MTS815.02 test system, and analyzed the mechanical parameters and energy damage evolution law of sandstone under different chemical environments. The test results showed that the basic mechanical parameters (peak strength σpk, peak strain εpk, elastic modulus E, cohesion c, and internal friction angle φ) and characteristic stress parameters (closure stress σcc, initiation stress σci, and dilatancy stress σcd) of sandstone first increased and then decreased with the increase of pH in the Na2SO4 solution, Poisson’s ratio µ showed the opposite trend, and the extreme values of all parameters were taken when pH = 7. The influence degree of different pHs on the mechanical parameters of sandstone were as follows: strong acid environment (pH ≤ 4) > strong alkali environment (pH ≥ 10) > weak acid environment (4 ≤ pH < 6) > weak alkali environment (8 ≤ pH < 10) > neutral environment (6 < pH< 8). The total energy and elastic strain energy increased first and then decreased, and the dissipated energy was the opposite. The damage variable decreased first and then increased. With the increasing concentration of the Na2SO4 solution, all the above parameters changed monotonically. Based on the energy theory, the damage evolution equation considering the effect of the Na2SO4 concentration was established. Combined with the test data, the model was verified and the result was good. Under the action of Na2SO4 corrosion, Ca2+ in calcite and Fe2+ in hematite were dissolved and precipitated. With the gradual increase of Ca2+ and Fe2+ concentration, the damage variable increased gradually. The relationship between the two ion concentrations and the damage variable approximately satisfied a linear function.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Grouting, Rheology, and Soil Mechanics · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Civil Engineering Institute, Liaoning Technical University, Fuxin 123000, China
Guangxi Key Laboratory of Geotechnical Mechanics and Engineering, Guilin University of Technology, Guilin 541004, China
Funding
Guangxi Natural Science Foundation under Grant
References (30)
Show source-provided references
1. Piotr, B., Jarosław, S., Piotr, R., Rafał, W., Beata, T., and Elzbieta, H. (2022). Effect of Nano-SiO2 on the microstructure and mechanical properties of concrete under high temperature conditions. Materials, 15.10.3390/ma15010166 ↗
2. Su, Y.H., Luo, B., Luo, Z.D., Huang, H., Li, J.B., and Wang, D.H. (2022). Effect of Accelerators on the workability, strength, and icrostructure of ultra-high-performance concrete. Materials, 15.10.3390/ma15010159 ↗
3. Deterioration of shear strength parameters of limestone joints under simulated acid rain condition10.1016/j.ijrmms.2020.104508 ↗
4. Real-time computerized tomography (CT) experiments on sandstone damage evolution during triaxial compression with chemical corrosion10.1016/S1365-1609(03)00059-5 ↗
5. Experimental study on physicomechanical properties of sandstone under acidic environment
6. Effect of acid-temperature-pressure on the damage characteristics of sandstone10.1016/j.ijrmms.2019.104079 ↗
7. Effect of water chemical corrosion on mechanical properties and failure modes of pre-fissured sandstone under uniaxial compression10.1007/s11440-020-01071-y ↗
8. Damage evolution behavior and constitutive model of sandstone subjected to chemical corrosion10.1007/s10064-019-01500-7 ↗
9. Fracturing and damage to sandstone under coupling effects of chemical corrosion and freeze-thaw cycles10.1007/s00603-016-1028-7 ↗
10. Mechanism damage to mode-I fractured sandstone from chemical solutions and its correlation with strength characteristics10.1007/s00024-019-02237-w ↗
11. Mechanical characteristics and freeze-thaw damage mechanisms of mode-I cracked sandstone from the three gorges reservoir region under different chemical solutions10.1007/s12517-021-07326-6 ↗
12. Chemical thermodynamics and chemical kinetics analysis of sandstone dissolution under the action of dry-wet cycles in acid and alkaline environments10.1007/s10064-017-1162-9 ↗
13. Damage evolution model of sandstone under coupled chemical solution and freeze-thaw process10.1016/j.coldregions.2019.03.012 ↗
14. Damage evolution mechanism and constitutive model of freeze- thaw yellow sandstone in acidic environment10.1016/j.coldregions.2018.07.012 ↗
15. Effect of acid mine drainage (AMD) on the alteration of hydrated Portland cement and calcareous sandstone10.1016/j.apgeochem.2021.104900 ↗
16. Coupled effects of chemical environments and freeze-thaw cycles on damage characteristics of red sandstone10.1007/s10064-016-0908-0 ↗
17. Influence of chemical degradation on mechanical behaviour of a limestone10.1016/j.ijrmms.2011.04.015 ↗
18. Compressive failure characteristics of yellow sandstone subjected to the coupling effects of chemical corrosion and repeated freezing and thawing10.1016/j.enggeo.2017.12.014 ↗
19. A chemical damage model of sandstone in acid solution10.1016/S1365-1609(02)00132-6 ↗
20. Alteration of mesoscopic properties and mechanical behavior of sandstone due to hydro-physical and hydro-chemical effects10.1007/s00603-016-1111-0 ↗
21. Analysis of the energy and damage evolution rule for sandstone based on the particle flow method
22. An energy-based fatigue damage model for sandstone subjected to cyclic loading10.1007/s00603-020-02209-w ↗
23. Dynamic response and energy evolution of sandstone under coupled static-dynamic compression: Insights from experimental study into deep rock engineering applications10.1007/s00603-019-01980-9 ↗
24. Analysis of energy dissipation and crack evolution law of sandstone under impact load10.1016/j.ijrmms.2020.104359 ↗
25. Fracturing mechanism of compressed hollow-cylinder sandstone evaluated by X-ray micro-CT scanning10.1007/s00603-018-1466-5 ↗
26. Macro-mesoscopic fracture and strength character of pre-cracked granite under stress relaxation condition10.1007/s00603-018-1399-z ↗
27. Discussion on failure mechanism and strength criterion of sandstone based on particle discrete element method
28. Research review of the state key research development program of China: Deep rock mechanics and mining theory
29. Criteria for strength and structural failure of rocks based on energy dissipation and energy release principles
30. Energy mechanism of deformation and failure of rock masses