Blast Resistance of Reinforced Concrete Slabs Based on Residual Load-Bearing Capacity
Source abstract
Abstract
In this paper, the blast-loading experiment and numerical simulation are carried out for RC slabs with two typical reinforcement ratios. The time history of reflected shockwave pressures and displacement responses at different positions on the impact surface of the specimens are obtained, and the influence of the reinforcement ratio on the dynamic responses and failure modes of the RC slabs is analyzed. Based on the experimental data, the simulation model of the RC slab is verified, and the results indicate good agreement between the two methods. On this basis, the residual load-bearing capacity of the damaged RC slabs is analyzed. The results show that the load distribution on the impact surface of the slab is extremely uneven under close-in blast loading. The resistance curve shape of the RC slabs varies markedly before and after blast loading, and its load bearing capacity and bending stiffness deteriorate irreversibly. Increasing the reinforcement ratio can impede crack extension, reduce the slab’s residual displacement, and, at the same time, reduce the decrease of the damaged slab’s load-bearing capacity. The findings of this study will provide insights into the anti-explosion design and damage evaluation of RC slabs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Nuclear Engineering, Rocket Force University of Engineering, Xi’an 710024, China
Northwest Institute of Nuclear Technology, Xi’an 710024, China
References (27)
Show source-provided references
1. Numerical study of concrete spall damage to blast loads10.1016/j.ijimpeng.2014.02.001 ↗
2. Experimental studies on fragments of reinforced concrete slabs under close-in explosions10.1016/j.ijimpeng.2020.103630 ↗
3. Fragmentation from spallation of RC slabs due to airblast loads10.1016/j.ijimpeng.2009.03.014 ↗
4. Experimental and numerical investigation of reinforced concrete slabs under blast loading10.1016/j.engstruct.2019.110125 ↗
5. Investigation of ultra-high performance concrete slab and normal strength concrete slab under contact explosion10.1016/j.engstruct.2015.08.032 ↗
6. Experimental and numerical study on the dynamic response of RC slabs under blast loading10.1016/j.engfailanal.2016.04.027 ↗
7. Composite structural panels subjected to explosive loading10.1016/j.conbuildmat.2004.07.021 ↗
8. Huff, W.L. (1975). Collapse Strength of a Two-Way-Reinforced Concrete Slab Contained within a Steel Frame Structure, US Army Engineer Waterways Experiment Station. Final Report.
9. Experimental study on scaling the explosion resistance of a one-way square reinforced concrete slab under a close-in blast loading10.1016/j.ijimpeng.2012.03.010 ↗
10. Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion10.1016/j.engfailanal.2012.07.010 ↗
11. Improving the blast resistance capacity of RC slabs with innovative composite materials10.1016/j.compositesb.2006.06.015 ↗
12. Full-scale field tests of concrete slabs subjected to blast loads10.1016/j.ijimpeng.2006.12.008 ↗
13. Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads10.1016/j.ijimpeng.2014.07.018 ↗
14. Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs10.1016/j.engstruct.2009.03.020 ↗
15. Pressure–Impulse (P–I) Diagrams for Reinforced Concrete (RC) Structures: A Review10.1007/s11831-018-9260-9 ↗
16. Pressure–Impulse diagrams for the behavior assessment of structural components10.1016/j.ijimpeng.2007.12.004 ↗
17. Pulse loading shape effects on pressure–impulse diagram of an elastic–plastic, single-degree-of-freedom structural model10.1016/S0020-7403(02)00046-2 ↗
18. Pressure-Impulse Diagram for Blast Loads Based on Dimensional Analysis and Single-Degree-of-Freedom Model10.1061/(ASCE)0733-9399(2002)128:1(87) ↗
19. Reliability analysis of reinforced concrete slabs under explosive loading10.1016/S0167-4730(01)00011-X ↗
20. Reliability analysis of direct shear and flexural failure modes of RC slabs under explosive loading10.1016/S0141-0296(01)00087-6 ↗
21. Analysis of direct shear failure mode for RC slabs under external explosive loading10.1016/j.ijimpeng.2014.02.018 ↗
22. Experimental and numerical investigations on performance of reinforced concrete slabs under explosive-induced air-blast loading: A state-of-the-art review10.1016/j.istruc.2021.01.102 ↗
23. Dynamic response of a reinforced concrete slab subjected to air blast load10.1016/j.tafmec.2011.11.002 ↗
24. Numerical study on dynamic behaviors of NRC slabs in containment dome subjected to close-in blast loading10.1016/j.tws.2018.11.013 ↗
25. Empirical Formula and Numerical Simulation of TNT Explosion Shock Wave in Free Air
26. Hallquist, J. (2003). LS-DYNA Keyword User’s Manual, Version: 970, Livermore Software Technology Corporation (LSTC).
27. Blast Resistance of Containment Dome Reinforced Concrete Slab in NPP under Close-in Explosion